Professional Documents
Culture Documents
1. A simply supported reinforced concrete beam is 250 mm wide and 500 mm deep to the center of tensile
reinforcement and is reinforced with 4 bars of 20 mm diameter as tensile steel. If the beam is subjected to a
factored shear of 5 times of summation of last four digits of your roll number in kN at the support. Design the shear
reinforcement consisting of stirrups. Use M 20 concrete and Fe 415 steel.
2. Explain various limit states which are used in limit state method of concrete design
3. A singly reinforced beam 300 mm X 600 mm is reinforced with (Sum of last two digits of your roll number) bars of
25 mm diameter. Find the ultimate moment of resistance of the beam section. Use M 20 concrete and Fe 415 steel.