Professional Documents
Culture Documents
(b) A doubly reinforced beam section is 250mm wide and 450mm deep to the centre of [10]
the tensile reinforcement. It is reinforced with #2 -16mm dia as compression
reinforcement at an effective cover of 50mm and #4 - 25mm dia as tensile steel,
using M15 concrete and Fe250 steel. Calculate the ultimate moment of resistance of
the beam section
PART B
3 (a) A simply supported rectangular RC beam having clear span of 5.93 m is resting on [15]
300 mm wide supports, at ends. Take width of beam = 300 mm, super imposed load
of 12 kN/m. Use M20 concrete and Fe415 steel. Design the beam and check it for
deflection control. Show the reinforcement details.
OR
4 (a) Design a cantilever beam having an effective span of 3m. the beam is carrying a [15]
load of 10kN/m, Use M20 concrete and Fe415 steel
***