Professional Documents
Culture Documents
1. Scope of design:
This Technical Instruction specifies the type and placement of safety signs on the engine room door. You
must also be aware of and comply with the relevant official instructions regarding the posting of signs.
DANGER
CO
(( CO))
ISO 3864, ÖNORM Z1000, ANSI Z535 JWN 080 080 / 400743
3. Placement:
All doors leading to the engine room must be marked with an operating area sign or provided with a
safety sign.
Signs must be located on the upper half of the engine room door. In certain cases, they may be located
at the same height and within the area extending 80 cm [31.5 in] from the opening.
Location of signs
80 cm