Professional Documents
Culture Documents
Is this pinout
correct incorrect
NO DIY dev ic es
Pin Pin
Description Logitech X-230 Subwoofer cable
Number Name
visual pinout:
1 LED+ Grey
Brown
2 IN R
click to enlarge
3 OUT R Red
4 OUT L Black
5 GND (signal) Green & Shield wire
6 ON Connect to pin 7
7 +5V
8 GND (amp) Yellow & Blue
9 IN L Purple
If the switch does not work, try to change connection between pin 7 and 1. The
amplifier should turn on when there is +5V at pin 6.
Subwoofer amplifier is turned on with the sattelites, there is no separate circuit for
turning the subwoofer on.
x-230 europe
1
purple > 2
yellow >3
red>4
green+shield >5
grey>6
7
blue/black > 8
brown >9
Contributor(s): M.G.
Last updated 2017-05-30 22:29:43.
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinoutguide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.