The document provides instructions for evaluating and creating a stair flight assembly in 3 steps. First, select "Evaluate Stair Flight" to check the validity of the stair flight design against criteria. Next, the system will display a graphical representation of the stair flight if valid. Finally, once the design is validated, select "Create Stair Flight" to generate the detailed representation of the stair flight and handrail as previously defined.
The document provides instructions for evaluating and creating a stair flight assembly in 3 steps. First, select "Evaluate Stair Flight" to check the validity of the stair flight design against criteria. Next, the system will display a graphical representation of the stair flight if valid. Finally, once the design is validated, select "Create Stair Flight" to generate the detailed representation of the stair flight and handrail as previously defined.
The document provides instructions for evaluating and creating a stair flight assembly in 3 steps. First, select "Evaluate Stair Flight" to check the validity of the stair flight design against criteria. Next, the system will display a graphical representation of the stair flight if valid. Finally, once the design is validated, select "Create Stair Flight" to generate the detailed representation of the stair flight and handrail as previously defined.
Select Evaluate Stair Flight to check the validity of the Stair Flight against the criteria defined in the current Standard, if the Stair Flight assembly is valid the system will display a graphical representation of the Stair Flight showing both the lower and upper work points and the number of Flight segments associated with the Stair Flight. The system provides additional checking and will not allow the lower and upper work points to be on the same elevation, where there are positional irregularities the system will provide appropriate feedback before performing a check against the criteria.
Create Stair Flight
When the user is satisfied with the layout of the Stair Flight and the system has validated the criteria, the Stair Flight can be created and the detail representation of the Stair Flight and Handrail will be that previously defined in the Assemblies task.