Professional Documents
Culture Documents
Access Platforms Stairs and Ladders User Guide-26
Access Platforms Stairs and Ladders User Guide-26
Explicit positioning either via the Upper or Lower WP is supported and the system will check
the results of the new position against the engineering criteria of the Stair Flight to the
criteria of the current specification and if valid the Stair Flight will be re-positioned. The
default Flight Direction or the Stair Tower is north though once the Stair Flight has been
created it is set by the application based on the positions of the lower and upper work
points. Having input the Upper Work Point position using either the explicit of graphical
method and the position gadget has been populated the Lower Work Point Position gadget
becomes active.
4:2 12.0