Professional Documents
Culture Documents
The Powerwave RET triple band module consists of two stepping motors that
can be connected to the positioning rods used for adjusting the electrical down tilt
of Powerwave MET antennas.
TB RET
Upon command from the MCU, the stepping motor moves the positioning rod up
or down to achieve the desired antenna tilt angle.
The unit can be mounted on site on a triple band antenna that is already in place
or be delivered mounted on a Powerwave antenna.
Key Benefits:
Technical Specifications
Product Number 7030.00 (7032.00 for single motor version)
COVERAGE AND
CAPACITY
Power supply +9 to30V
Current consumption:
Start up surge < 1mC
Current draw during Antenna tilting < 500 mA at Vin <10V
< 400 mA at Vin <19V
TECHNOLOGY
< 250 mA at Vin >19V LEADERSHIP
Weight 1 kg
Dimensions (W,L,H) (mm) < 125 X 213 X 62 (excl mounting screws)
Connectors
AISG output/ input IEC 60130-9 (Ed. 3.0)
Protection Ground M6 screw
©Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.