Professional Documents
Culture Documents
Selesmar Selux
The Selesmar Selux is the fifth generation ARPA radar from Consilium. The radar system,
which have special type approval for its three main components – radar computer, key-
board and display – has been developed in response to increased demands for modern
navigation aids.
ÇConsilium
The SELUX ARPA display is produced in three
different configurations
Deck configuration providing an Modular configuration with moni- Table top configuration where the
optional display deck stand which tor, keyboard and ARPA electronic monitor and keyboard are housed
can also house the electronic cabi- cabinet supplied as three separate into an ergonomic console while
net. modules which might be flush the ARPA electronics are contained
mounted into the Bridge Console in a separate bulkhead mounting
as the Customer may desire. cabinet.
X-band Antenna Group including 6 or 9 feet Antenna and S-band Antenna Group including 12 feet Antenna and
Pedestal with 12/25 kW Transceiver Up-mast (*) Pedestal with 30 kW Transceiver Up-mast (*)
S-Band Radar
Selux T-340/250 ARPA 30U/12S 30kW 12 feet Up / Down mast Deck/Panel/Table
New electronics and interface
The new electronics is characterized by an high inte- the SELUX ARPA display also performs the following
gration reducing the main electronic at one printed innovative functions:
circuit board only, thus increasing the reliability of the Interface with the Automatic Identification System
equipment, limiting the quantity of spare parts and, (AIS) allowing the presentation of 100 AIS targets
consequently, the maintenance cost. closest to the ship's own position.
A new user-friendly man-machine interface allows the - Improved graphic and mapping capability;
activations of all functions by simply using the track- - In addition to the standard, north stabilized, Guard
ball to point and click virtual push-buttons displayed Zones required by IMO, one Auto-acquisition
on the screen. Zone, stabilized on the ship's own position and
The most frequently used ARPA functions can also be heading, can be activated and shaped by the oper-
accessed by using dedicated push-buttons available ator in order to continuously watch the proximity
on the keyboard. Three spare push-buttons are avail- of the ship with preference for the bow sector;
able in the same keyboard, each one allowing the - New on-line Help and improved On Line
sequential and automatic activation of up to 6 func- Diagnostic features for easy fault locations;
tions previously selected by the operator. - USB interface allowing an easy and fast mainte-
The SELUX monitor is always LCD TFT type with very nance, updating of the software programs, transfer
high resolution color presentation The monitor size and storing of video maps on Flash Memory Disk;
can be either 19” or 23” providing an actual radar pic- - On-board 100 Mbits Ethernet for video and data
ture of 250 mm. or 340 mm. respectively. transfer via LAN, and receive NMEA sentences
Beside the standard features recommended by IMO, through LAN.
Line Style
The Selesmar Selux has improved functionality for - Sleeping AIS targets can easily be obtained through
both ARPA and AIS target identification. With an acti- this list by just selecting the appropriate name in
vated Guard Zone around own ship all targets are the list.
selected and checked automatically. - A similar list for ARPA targets is also available, but it
- All AIS targets, also unselected , are checked is organised with range and dangerousness (low
against the minimum safe parameters and automat- CPA and TCPA on top of the list).
ically activated when dangerous. - All tracking associated features like past positions,
- AIS names or call signs can be displayed over the auto-acquisition/guard zones and trial manoeuvre
PPI symbol. are available at the same time for both AIS and
- The AIS list, an easy method to select AIS targets is ARPA targets.
included. The AIS list contains all displayed AIS tar- - AIS and ARPA targets can be combined automati-
gets including their progressive ID number, name cally with a user set of parameters to reduce the
and range. The list can be organised either in dis- graphical “clutter” on the PPI.
tance or alphabetical order for names; up to four
elements can be selected.
DOWN MAST INSTALLATION UP MAST INSTALLATION
X-Band Antenna Group including Antenna and Pedestal X-Band Antenna Group including Antenna and Up-
mast Transceiver
25 kW X-band Transceiver (Down-mast)
12 kW X-band Transceiver (Up-mast)
6 ft Antenna
6 ft Antenna
DO NOT PAINT
2x1,5 mm2 Ç Consilium Selesmar DO NOT PAINT
2x1,5 mm2
WAVEGUIDE
Safety 303216A1 OR
Switch 303214A4 OUTDOOR
INDOOR
Safety
X-Band Transceiver Switch
CABLE TYPE: Downmast
55M455P002 OR
55M455P003
220V˜380V/50Hz 3Ph. OUTDOOR
255V˜440V/60Hz 3Ph.
4x2,5 mm2 FROM SHIPS EMG. SUPPLY
INDOOR
Selux
Selux
Radar Display
Radar Display
3x1,5 mm2 FROM SHIPS EMG. SUPPLY 55M455P003 115/220V 1Ph 50 or 60Hz.
TERMINALS
Display Specification: See back page Display Specification: See back page
Antenna & Transceiver: Antenna & Transceiver:
Peak Power: 25kW Peak Power: 12kW
Antenna: 6 / 9 / 12 feet Antenna: 6 feet
Antenna Horizontal beam 6ft / 1,2°; 9ft / 0,9°; 12ft / 0,7° Antenna Horizontal beam 6ft / 1,2°
width at -3dB: width at -3dB:
Antenna Vertical beam 6ft / 22°; 9ft / 22°; 12ft / 22° Antenna Vertical beam 6ft / 22°
width at -3dB: width at -3dB:
Weight 6ft; 59 kg Weight (RTM + Antenna): 6ft; 69 kg
(Pedestal + Antenna): 9ft: 70 kg
12ft; 78 kg
DOWN MAST INSTALLATION UP MAST INSTALLATION
S-Band Antenna Group including Antenna and Pedestal S-Band Antenna Group including Antenna and
30 kW S-band Transceiver (Down-mast) Up-mast Transceiver
12 ft Antenna 30 kW S-band Transceiver (Up-mast)
12 ft Antenna
S-Band Antenna Group including Antenna and Pedestal with Transceiver Upmast
S-Band Antenna Group
including Antenna and Pedestal
2x1,5 mm2
2x1,5 mm2
Selux
Radar Display Selux
Radar Display
3x1,5 mm2
FROM SHIPS 55M455P002 OR
EMG. SUPPLY 55M455P003 (OTHER SUPPLY) 115/220V 1Ph 50 or 60Hz.
TERMINALS
7x0,5 mm2 Shielded
GYRO 3x1,5 mm2 FROM SHIPS EMG. SUPPLY
2x0,5 mm2 Shielded
SPEED LOG
2x0,5 mm2 Shielded
POSITION SENSOR (NMEA 183)
4x0,5 mm2 Shielded 7x0,5 mm2 Shielded
AIS (NMEA 183) GYRO
2x0,5 mm2 Shielded
SPEED LOG
2x0,5 mm2 Shielded
POSITION SENSOR (NMEA 183)
4x0,5 mm2 Shielded
AIS (NMEA 183)
Display Specification: See back page Display Specification: See back page
Antenna & Transceiver: Antenna & Transceiver:
Peak Power: 30kW Peak Power: 30kW
Antenna: 12 feet Antenna: 12 feet
Antenna Horizontal beam 12ft / 2,0º Antenna Horizontal beam 12ft / 2,0º
width at -3dB: width at -3dB:
Antenna Vertical beam 12ft / 22º Antenna Vertical beam 12ft / 22º
width at -3dB: width at -3dB:
Weight 12ft; 255 kg Weight 12ft; 220 kg
(RTM + Pedestal + Antenna) (Pedestal + Antenna):
TECHNICAL SPECIFICATIONS Mapping
Display Operator compiled maps up to 120 segments plus symbols and
text strings with selectable colours and line styles.
Monitor: 19” LCD TFT Map stabilisation: Relative, True (Dead Reckoning) or geo-
23” LCD TFT graphic.
Radar picture: >250mm (12” PPI) Map storage: By name, on a built-in non volatile memory.
>340mm (16” PPI) Map adjustment: Position and Orientation.
Resolution: 1280x1024 Parallel index: Four independent parallel index lines.
1600x1200 Data Readout: Own ship data.
Presentation Modes: Day/Night modes ARPA Target data
Relative motion (RM) Head, Course and North Up AIS Target data
True motion (TM) Course and North Up System setting: Safe minimum CPA & TCPA, vector / past
position / trial / trails time.
RM True Trails Course and North Up
Off-centering: Up to 50% of range scales in use
Others
Range Scales: 0.25; 0.5; 0.75; 1.5; 3: 6; 12; 24; 48; 96
Range Resolution: 3 m. on 0.75 NM range scale Alarms: Acoustic and visual warning for:
Azimuth resolution: 0.1º Dangerous Target, Target in Guard Zone,
Lost Target, System failure and external
Trackball: Polar and Geographic coordinates continu-
interface sensors (EPFS and AIS).
ously displayed
Other features: Anchor-watch, echo reference speed (not
Diagnostic: On-line diagnostic programs
for AIS enabled systems), EPFS speed.
Inputs: Gyro, Speed log, EPFS, AIS, Ext. Alarm
ARPA facilities Interface
Acquisition: Manual or automatic up to 40 targets Output: Serial interface NMEA 0183 (IEC 61162-1)
Tracking: Automatic up to 40 targets RATTM-RAOSD-RARSD-RAALR sentence
Autoacquisition/ One autoacquisition zone stabilized on own- AIACK (IEC 60936-5) for AIS alarm
Guard zones ship heading and size/shape configurable. acknowledge.
Four sector with fixed width of 0.5 NM Dead Man Alaram, Power Fail, Danger
Target
Configurable as autoacquisition of guard
zone. Video ouput for VDR.
Other interface: Ethernet 10/100Mbits
AIS facilities USB 1.1 port.
Specifications may be subject to change for improvement without prior notice MP06061 2006.05 rev 1.00