Professional Documents
Culture Documents
TITLE:
DOCUMENT NUMBER:
ER XXX YYY
EFFECTIVITY:
{Aircraft}
Reg. No:
MSN:
The technical content of this document is approved under the authority of the DOA Approval No.
DOA/2012/07
A signature in the ‘APPROVED BY’ block confirms the verification of compliance with all
airworthiness and environmental protection requirements identified in this document.
A signature in the ‘CONCURRED BY’ block signifies the completeness checking of the
document in the Type Investigation programme and approves the release of the document.
COMPANY /
NAME AND SIGNATURE DATE
DESIGNATION
PREPARED BY
APPROVED BY
CONCURRED BY
Rev. 0 Page 1 of 4
This document is a property of Aviation Design Centre Sdn Bhd, no part of it shall be reproduced without a
written consent from AVIATION DESIGN CENTRE SDN BHD nor shall its contents be disclosed.
ADC.F.15 Rev. 1/May 2016
ELECTRICAL LOAD ANALYSIS
Error! Reference source not found.ER XXX YYY
RECORD OF REVISIONS:
0 4 Initial Issue
Rev. 0 Page 2 of 4
This document is a property of Aviation Design Centre Sdn Bhd, no part of it shall be reproduced without a
written consent from AVIATION DESIGN CENTRE SDN BHD nor shall its contents be disclosed.
ADC.F.15 Rev. 1/May 2016
ELECTRICAL LOAD ANALYSIS
Error! Reference source not found.ER XXX YYY
Table of Contents
1. PURPOSE ......................................................................................................................................... 4
2. INTRODUCTION ............................................................................................................................... 4
3. SYSTEM DESCRIPTION .................................................................................................................. 4
4. REQUIREMENTS CONSIDERED ..................................................................................................... 4
5. METHODOLOGY .............................................................................................................................. 4
6. ANALYSIS ......................................................................................................................................... 4
7. CONCLUSION ................................................................................................................................... 4
8. REFERENCES .................................................................................................................................. 4
Rev. 0 Page 3 of 4
This document is a property of Aviation Design Centre Sdn Bhd, no part of it shall be reproduced without a
written consent from AVIATION DESIGN CENTRE SDN BHD nor shall its contents be disclosed.
ADC.F.15 Rev. 1/May 2016
ELECTRICAL LOAD ANALYSIS
Error! Reference source not found.ER XXX YYY
ELECTRICAL LOAD ANALYSIS
1. PURPOSE
The objective of this report is to present analysis to demonstrate compliance with requirements of
applicable regulations as identified in Compliance Checklist Document.
2. INTRODUCTION
3. SYSTEM DESCRIPTION
4. REQUIREMENTS CONSIDERED
5. METHODOLOGY
6. ANALYSIS
7. CONCLUSION
8. REFERENCES
Rev. 0 Page 4 of 4
This document is a property of Aviation Design Centre Sdn Bhd, no part of it shall be reproduced without a
written consent from AVIATION DESIGN CENTRE SDN BHD nor shall its contents be disclosed.
ADC.F.15 Rev. 1/May 2016