Professional Documents
Culture Documents
Vol. 13
TOLI Commercial Flooring 2020 Contents
Carpet Tile
ALTGLAN <GX-3800> 138 GA-540 85 OCASH <GX-2400> 136
CALMGRAIN <GX-5100> 144 GA-550 86 ORVIE <GX-8300> 142
CANNA <GX-7700> 126 GA-560 88 PATCH CORK <GX-4650V> 113
CEMBALO <GX-2300> 143 GA-570 89 PRARIE <GX-4200> 130
COLOR MOVE <GX-9850V> 120 GA-580 90 PRIMECLASS 170
CORENTE V <GX-9300V> 118 GA-590 91 RC-1200 173
DC-1100 172 GA-8700 75 RECTANG <GX-7000> 147
DEWPOINT <GX-6700> 146 GA-8900 76 RESONANCE <GX-9700V> 116
DIFFEBRILLER <GX-9650V> 119 GEOSLANT <GX-4100> 129 ROCK GARDEN <GX-9250V> 117
DRAWLINE <GX-6400> 131 GRACE LINE <GX-4300> 134 RUSCELLO II <GX-5250> 151
ETRICO <GX-8600> 148 GRANCOUR <GX-4700> 132 SLALOM <GX-9400V> 122
EUCLID <GX-6500> 145 GX-200 92 SOFTBACK PLUS 66
EXCHROME <EXC-1000> 160 GX-200 GRID CUT 94 SOKOITARI <GX-7800> 106
EXCHROME <EXC-2000> 162 GX-200 METAL DESIGN 95 SOKOITARI CLASSIC <GX-7900> 107
EXCHROME <EXC-5000> 166 GX-300 96 SOKOITARI GRANDAIR <GX-8100> 110
FABTEX 174 HAZEFINE <GX-2800> 139 SOKOITARI INSPIRATION <GX-8000> 108
GA-100 48 INCLINER <GX-4750> 133 SRONE <GX-9050V> 114
GA-100G (GA-100EM · GA-100AF · GA-100FH) 52 LATTICLOTH <GX-4900> 150 TONEDIRECTION <GX-6200> 137
GA-100N 53 LAYPLANCHER <GX-9550V> 121 UNDERLAY SHEET FOR CARPET TILES 180
GA-100S 50 LUCEART <GX-8500> 128 VARIOUS STONE <GX-4600> 125
GA-100SA 51 MAYORICA <GX-2100> 135 VENICHE <GX-9150V> 115
GA-100T 54 MODERNO <GX-5600> 141 WAVE KNIT <GX-4500> 124
GA-100W 58 MOROCA LINE <GX-4550V> 112 YUISOME 98
GA-3600 (GA-3600EM) 68 MORTARCLAY <GX-3700> 123 YUTAKA 34
GA-400 78 MT-2000 152 YUTAKA1000 36
GA-400A 80 MT-3800 154 YUTAKA2000 42
GA-400N 84 MT-5100 156
GA-400RS 83 MT-8000 158
GA-400S 82 NOCTURE <GX-8400> 140
Fabric Floor
ATTACK 270 CANVAS FINE 184 ATTACK 950 SOFT LOOP 188 SQUARE 3000 MELANCHET 194
ATTACK 350 RIPPLE PALETTE 182 SQUARE 2100 SISALOOP 189 SQUARE 4200 SUZUKASURI 192
ATTACK 450 NITOCO 185 SQUARE 2300 KIYORA 190 TEXTILE FLOOR 7000 RYOUORI 195
ATTACK 550 NOMAGY 186 SQUARE 2400 SOWARE 191 UNDERLAY SHEET FOR FABRIC FLOOR 196
ATTACK 750 TATRIL 187 SQUARE 2800 RHYTHM SQUARE 193
Vinyl Tile
CLAIRO 206 MATICO V 198 ROYAL STONE 220
CORDELLA 200 MOKURIN 210 ROYAL WOOD 251
FASOL PLUS 202 MOKURIN MASAME 211 SLATE SQUARE 216
GRANOBLE 205 MS FRESH 217 STRAINE 208
LIGHT STONE 250 MS PLAIN 218 VIALE 209
LIGHT WOOD 272 PIESTA 214
LINOTESTA 212 REFRIPE 204
Vinyl Sheet
CARESAFE NW 290 FLOORLEUM PLAIN NW 278 HOSPILEUM NW 292
FLOORLEUM FLAKE NW 284 FLOORLEUM SOILUD NW 282 MATURE NW 296
FLOORLEUM LATTICE NW 286 HABAKI 308 NONWAXLEUM NW 302
FLOORLEUM MARBLE NW 280 HITOE FINE 276 SF FLOOR NW 287
FLOORLEUM NATTY NW 285 HITOE GRANZA 274 TOLI JOINT SHIELD 306
Specialty Flooring
BATHNA ARTI 339 FLOORLEUM PLAIN EMBOSS 353 NS REAL DESIGN 350
BATHNA COLLECTION 338 FREE TILE 329 NS UNDERLAY SHEET 363
BATHNA FLORE 340 FREE TILE S 330 NS4400 AQUATREAD 358
BATHNA REAL DESIGN 341 LAVANA 344 NS550 GARDENT 354
BATHNA WALL UNIT 342 LL FREE 40 NW-EX 318 NS800 346
CIGAHARD PLUS NW 312 LL FREE 50 NW-EX 320 NS9500 NEW TOUGH SHINE 352
DEODORANT NS TOWARE NW 360 LL FREE 800 328 OPELEUM 333
EARTHLEUM 331 LL FREE EXCELLA 327 SUPER K SHEET 335
E-CLEAN NW-EX 314 LL50CRNW 326 SUPER K SHEET EXCELLA 336
FACTLEUM 332 NEW STANLOAD 337
FLOORLEUM FREE 334 NS FLATY 356
Company Profile & History 2 TOLI NW series 6
Job References of TOLI Products in Overseas 8 Contact Information 364
1
Company Profile & History
In 1919, TOLI Corporation started its operation
in Itami, Hyogo prefecture as the first linoleum
manufacturer in Japan. By developing products
such as vinyl tiles, vinyl sheets, and carpets,
TOLI became recognized as a major floor cov-
ering company. Later on, TOLI also began to
make curtains, wall coverings, and many other
products, and became successful as a general
manufacturer of interior goods.
TOLI has its factories at its Itami Head Quarters
and also in Atsugi, Shiga, Toyama, and Gifu. In
these 5 manufacturing plants, we make high
quality products that can satisfy our customers.
We make every effort to be customer-oriented,
striving to run our business by always keeping
our customers’ needs in mind in order to be-
come an even more dependable and trustwor-
thy company. ▲ TOLI Tokyo office
Profile
■Name TOLI Corporation
■Founded December, 1919
■Headquarters 5-125, Higashi-Arioka, Itami, Hyogo prefecture Japan 664-8610
■Type of business Sales and manufacturing floor covering, wallpapers, drapes, and their
installation accessories.
■Sales organization 44 sales departments & branches, and 4 showrooms
■Factory Itami, Atsugi, and other brother company’s factories are located in Shiga,
Toyama, and Gifu.
■President Motohiro Nagashima
■Number of Non-Consolidated 876 (as of Mar. 2019)
Employee
Consolidated 1,833 (as of Mar. 2019)
■Annual Sales Non-Consolidated JPY 53,911 million (fiscal year 2018)
Consolidated JPY 90,355 million (fiscal year 2018)
2
History 2019
Oct. Won the prize of ‘GOOD DESIGN AWARD’
for the vinyl sheet “HITOE FINE”
2017
2016 Oct. Won the prize of ‘GOOD DESIGN AWARD’ for the
vinyl tile “ROYAL STONE (HIGH-END)/LUMINOUS”
Oct. Won the prize of ‘GOOD DESIGN AWARD’
for the woven modular tile “FABTEX SERIES”
Oct. Won the prize of ‘GOOD DESIGN AWARD’
for the carpet tile “GX SERIES” and the 2015
vinyl loose lay tile “LOOSE LAY TILE SETIES” Nov. Been certified according to “IOS14001” for carpet production
Oct. Won the prize of ‘GOOD DESIGN/LONGLIFE DESIGN AWARD’
2014 for the carpet tile product “GA-100 SERIES”
Feb. Founded the sale subsidiary in China
“TOLI (SHANGHAI) Corporation”
Jul. Won the prize of ‘KID DESIGN AWARD’ 2012
for the “Fabric Floor”
Oct. Won the prize of ‘GOOD DESIGN AWARD’ for the vinyl sheet
Oct. Won the prize of ‘GOOD DESIGN AWARD’ for product “NS-800”
the carpet tile product “SOKOITARI GRANDAIR”
2010
2009 Oct. Won the prize of ‘GOOD DESIGN AWARD’ for the carpet tile
Aug. Launched the maintenance-free vinyl sheet “NONWAXLEUM” product “GA-8800EM” and the textile floor product “TX-1000”
Dec. The 90th anniversary of the founding
2008
Apr. Founded the carpet tile factory “Gifu TOLI” in Gifu
Oct. Won the prize of ‘GOOD DESIGN AWARD’ for the maintenance
service for carpet tiles “Off-Location System”
2007
Oct. Won the prize of ‘GOOD DESIGN AWARD’
for the carpet tile product “VARY collection”
2006
Oct. Won the prize of ‘GOOD DESIGN AWARD’ for the carpet
tile product “MTE”
2005
Oct. Won the prize of ‘GOOD DESIGN AWARD’
for the carpet tile product “SOKOITARI” 2003
Jun. Launched the wallpaper made of diatomaceous earth
“EARTHWALL”
2001
May Launched the dado wall “WOOD DECO”
1998
Jan. Launched the wallpaper made of kenaf grass “KENAF WALL”
1996
Dec. Launched the new residential carpet tile “PANEL CARPET” 1991
Oct. Altered the company name to the current ‘TOLI Corporation’
1989
Apr. Launched the wallpaper collection “TOLI WALL” 1987
Nov. Launched the inlaid vinyl sheet “CERCUNS FLOOR” Sep. Founded the wallpaper factory ‘Santen TOLI’ in Toyama
1985
Apr. Started the maintenance service for carpet tiles 1984
“Off-Location System” in Atsugi Mar. Launched the curtain and drapes collection
“TOLI CURTAIN”
Oct. Founded the carpet tile factory ‘Shiga TOLI’ in Shiga
1983 Dec. Founded the vinyl sheet factory ‘Hiroka TOLI’ in Shiga
Jun. Launched the carpet tile “GA-100”
1977
1972 Jun. Launched the vinyl sheet “FLOORLEUM”
Jul. Launched the vinyl cushion floor “CF Sheet”
1970
1963 May Launched the contract carpet “GRACE”
Nov. Founded the vinyl tile factory in Atsugi,
and launched its vinyl tile “MATICO”
1949
1919 May Been listed on the Tokyo and Osaka Stock Exchange
Dec. Been founded by the name of ‘TOYO LINOLEUM’ in Itami,
as the first linoleum manufacturer in Japan
3
If you look for eco-friendly floor covering, please choose from the prod-
ucts which indicate the logos of “TOLI ECO SPIRIT” , “CRI GREEN LABEL
PLUS” & “Floor Score” .
( ) after the product name shows the page number of this catalogue.
“Improve Indoor Air Quality” ---- the products that can be helpful to
improve the indoor air quality
4
“Resource Saving” ---- the products that can be installed without
adhesives or the products with low-maintenance finish
For LEED projects, TOLI products with the following certificates will contribute towards points for
LEED EQ Credit Low-Emitting Materials.
1979 Started to reuse the vinyl wastage of green houses as the material for our vinyl floor covering products
1983 Launched the first Japanese carpet tile product with PVC backing for easy installation
1985 Started the maintenance facility for carpet tiles “TOLI Off-Location System” in Atsugi
Launched the wallpaper “KENAF WALL”, the first wallpaper product in the world that uses non-ex-
1998 haustible resource ‘Kenaf’
Launched the eco-friendly curtain products made of recycled fiber from PET bottles
Announced “TOLI ECO SPIRIT” as the company’s commitment to environmental protection
2000 Started to operate the recycling plant of carpet tiles in Shiga
Launched the wallpaper made of diatomaceous earth “EARTHWALL”, which has odor eliminating and
2003 resolving property
5
Durable, Strong, and Exquisite
“NW” stands for “No Wax” ― TOLI NW series and NW-EX series are the vinyl flooring which does not require
the maintenance by wax coating.
NW series and NW-EX series can drastically reduce the maintenance cost for the floor, and its beautiful
appearance can be kept simply by daily maintenance.
With its abundant lineups, NW series and NW-EX series will contribute to comfortable facilities environment.
vinyl flooring
without NW
finish
With its excellent durability, beautiful appearance can be kept for long!
NjStructure Vinyl Sheet FLOORLEUM PLAIN NW, FLOORLEUM MARBLE NW HITOE GRANZA, HITOE FINE
Highly-durable Highly-durable
UV coated layer UV coated layer
Other NW series
Vinyl Tile
Highly-durable Highly-durable
UV coated layerĐ antibacterial
UV coated layer
TOLI’s original “Highly-durable UV coating layer” will make its stain resistance last longer.
6
Advantages of NW Series and NW-EX Series
Special Daily
cleaning Cleaning on an annual basis cleaning
( )
ex. year-end cleaning,
Clear the stains removal of wax Keep away stains
that are usually and dusts from
difficult to accumulating
remove
Remove the
accumulated
No need Cleaning on a monthly basis
stains
( )
ex. cleaning with wax application
to apply the wax using a professional equipment
shops /all kind of facilities Approx. 50 years When used in the shop, where 1,000 people
vinyl MATURE NW 296 are coming per day.
sheet
FLOORLEUM PREMIUM NW When used in the public facility where 1,000
public facilities / education 282 Approx. 30 years
series people come per day.
vinyl offices / schools / working LL FREE 40 NW-EX 318 Approx. 40 years When used in the office, where 200 people
tile places are working per day.
LL FREE 50 NW-EX 320 Approx. 40 years
ǘ Durable years are calculated on condition that each floor covering is used with people’s shoes on and wax maintenance is not proceeded.
ǘ Durable years are also based upon the assumption on traffic by normal distribution, correlated with the original durability of each floor covering.
ǘ Even for recommended applications, in case the floor covering is used beyond the conditions as above, durability years may differ.
7
Company Profile & History
In 1919, TOLI Corporation started its operation
in Itami, Hyogo prefecture as the first linoleum
manufacturer in Japan. By developing products
such as vinyl tiles, vinyl sheets, and carpets,
TOLI became recognized as a major floor cov-
ering company. Later on, TOLI also began to
make curtains, wall coverings, and many other
products, and became successful as a general
manufacturer of interior goods.
TOLI has its factories at its Itami Head Quarters
and also in Atsugi, Shiga, Toyama, and Gifu. In
these 5 manufacturing plants, we make high
quality products that can satisfy our customers.
We make every effort to be customer-oriented,
striving to run our business by always keeping
our customers’ needs in mind in order to be-
come an even more dependable and trustwor-
thy company. ▲ TOLI Tokyo office
Profile
■Name TOLI Corporation
■Founded December, 1919
■Headquarters 5-125, Higashi-Arioka, Itami, Hyogo prefecture Japan 664-8610
■Type of business Sales and manufacturing floor covering, wallpapers, drapes, and their
installation accessories.
■Sales organization 44 sales departments & branches, and 4 showrooms
■Factory Itami, Atsugi, and other brother company’s factories are located in Shiga,
Toyama, and Gifu.
■President Motohiro Nagashima
■Number of Non-Consolidated 876 (as of Mar. 2019)
Employee
Consolidated 1,833 (as of Mar. 2019)
■Annual Sales Non-Consolidated JPY 53,911 million (fiscal year 2018)
Consolidated JPY 90,355 million (fiscal year 2018)
2
History 2019
Oct. Won the prize of ‘GOOD DESIGN AWARD’
for the vinyl sheet “HITOE FINE”
2017
2016 Oct. Won the prize of ‘GOOD DESIGN AWARD’ for the
vinyl tile “ROYAL STONE (HIGH-END)/LUMINOUS”
Oct. Won the prize of ‘GOOD DESIGN AWARD’
for the woven modular tile “FABTEX SERIES”
Oct. Won the prize of ‘GOOD DESIGN AWARD’
for the carpet tile “GX SERIES” and the 2015
vinyl loose lay tile “LOOSE LAY TILE SETIES” Nov. Been certified according to “IOS14001” for carpet production
Oct. Won the prize of ‘GOOD DESIGN/LONGLIFE DESIGN AWARD’
2014 for the carpet tile product “GA-100 SERIES”
Feb. Founded the sale subsidiary in China
“TOLI (SHANGHAI) Corporation”
Jul. Won the prize of ‘KID DESIGN AWARD’ 2012
for the “Fabric Floor”
Oct. Won the prize of ‘GOOD DESIGN AWARD’ for the vinyl sheet
Oct. Won the prize of ‘GOOD DESIGN AWARD’ for product “NS-800”
the carpet tile product “SOKOITARI GRANDAIR”
2010
2009 Oct. Won the prize of ‘GOOD DESIGN AWARD’ for the carpet tile
Aug. Launched the maintenance-free vinyl sheet “NONWAXLEUM” product “GA-8800EM” and the textile floor product “TX-1000”
Dec. The 90th anniversary of the founding
2008
Apr. Founded the carpet tile factory “Gifu TOLI” in Gifu
Oct. Won the prize of ‘GOOD DESIGN AWARD’ for the maintenance
service for carpet tiles “Off-Location System”
2007
Oct. Won the prize of ‘GOOD DESIGN AWARD’
for the carpet tile product “VARY collection”
2006
Oct. Won the prize of ‘GOOD DESIGN AWARD’ for the carpet
tile product “MTE”
2005
Oct. Won the prize of ‘GOOD DESIGN AWARD’
for the carpet tile product “SOKOITARI” 2003
Jun. Launched the wallpaper made of diatomaceous earth
“EARTHWALL”
2001
May Launched the dado wall “WOOD DECO”
1998
Jan. Launched the wallpaper made of kenaf grass “KENAF WALL”
1996
Dec. Launched the new residential carpet tile “PANEL CARPET” 1991
Oct. Altered the company name to the current ‘TOLI Corporation’
1989
Apr. Launched the wallpaper collection “TOLI WALL” 1987
Nov. Launched the inlaid vinyl sheet “CERCUNS FLOOR” Sep. Founded the wallpaper factory ‘Santen TOLI’ in Toyama
1985
Apr. Started the maintenance service for carpet tiles 1984
“Off-Location System” in Atsugi Mar. Launched the curtain and drapes collection
“TOLI CURTAIN”
Oct. Founded the carpet tile factory ‘Shiga TOLI’ in Shiga
1983 Dec. Founded the vinyl sheet factory ‘Hiroka TOLI’ in Shiga
Jun. Launched the carpet tile “GA-100”
1977
1972 Jun. Launched the vinyl sheet “FLOORLEUM”
Jul. Launched the vinyl cushion floor “CF Sheet”
1970
1963 May Launched the contract carpet “GRACE”
Nov. Founded the vinyl tile factory in Atsugi,
and launched its vinyl tile “MATICO”
1949
1919 May Been listed on the Tokyo and Osaka Stock Exchange
Dec. Been founded by the name of ‘TOYO LINOLEUM’ in Itami,
as the first linoleum manufacturer in Japan
3
If you look for eco-friendly floor covering, please choose from the prod-
ucts which indicate the logos of “TOLI ECO SPIRIT” , “CRI GREEN LABEL
PLUS” & “Floor Score” .
( ) after the product name shows the page number of this catalogue.
“Improve Indoor Air Quality” ---- the products that can be helpful to
improve the indoor air quality
4
“Resource Saving” ---- the products that can be installed without
adhesives or the products with low-maintenance finish
For LEED projects, TOLI products with the following certificates will contribute towards points for
LEED EQ Credit Low-Emitting Materials.
1979 Started to reuse the vinyl wastage of green houses as the material for our vinyl floor covering products
1983 Launched the first Japanese carpet tile product with PVC backing for easy installation
1985 Started the maintenance facility for carpet tiles “TOLI Off-Location System” in Atsugi
Launched the wallpaper “KENAF WALL”, the first wallpaper product in the world that uses non-ex-
1998 haustible resource ‘Kenaf’
Launched the eco-friendly curtain products made of recycled fiber from PET bottles
Announced “TOLI ECO SPIRIT” as the company’s commitment to environmental protection
2000 Started to operate the recycling plant of carpet tiles in Shiga
Launched the wallpaper made of diatomaceous earth “EARTHWALL”, which has odor eliminating and
2003 resolving property
5
Durable, Strong, and Exquisite
“NW” stands for “No Wax” ― TOLI NW series and NW-EX series are the vinyl flooring which does not require
the maintenance by wax coating.
NW series and NW-EX series can drastically reduce the maintenance cost for the floor, and its beautiful
appearance can be kept simply by daily maintenance.
With its abundant lineups, NW series and NW-EX series will contribute to comfortable facilities environment.
vinyl flooring
without NW
finish
With its excellent durability, beautiful appearance can be kept for long!
NjStructure Vinyl Sheet FLOORLEUM PLAIN NW, FLOORLEUM MARBLE NW HITOE GRANZA, HITOE FINE
Highly-durable Highly-durable
UV coated layer UV coated layer
Other NW series
Vinyl Tile
Highly-durable Highly-durable
UV coated layerĐ antibacterial
UV coated layer
TOLI’s original “Highly-durable UV coating layer” will make its stain resistance last longer.
6
Advantages of NW Series and NW-EX Series
Special Daily
cleaning Cleaning on an annual basis cleaning
( )
ex. year-end cleaning,
Clear the stains removal of wax Keep away stains
that are usually and dusts from
difficult to accumulating
remove
Remove the
accumulated
No need Cleaning on a monthly basis
stains
( )
ex. cleaning with wax application
to apply the wax using a professional equipment
shops /all kind of facilities Approx. 50 years When used in the shop, where 1,000 people
vinyl MATURE NW 296 are coming per day.
sheet
FLOORLEUM PREMIUM NW When used in the public facility where 1,000
public facilities / education 282 Approx. 30 years
series people come per day.
vinyl offices / schools / working LL FREE 40 NW-EX 318 Approx. 40 years When used in the office, where 200 people
tile places are working per day.
LL FREE 50 NW-EX 320 Approx. 40 years
ǘ Durable years are calculated on condition that each floor covering is used with people’s shoes on and wax maintenance is not proceeded.
ǘ Durable years are also based upon the assumption on traffic by normal distribution, correlated with the original durability of each floor covering.
ǘ Even for recommended applications, in case the floor covering is used beyond the conditions as above, durability years may differ.
7
Job References of TOLI Products in Overseas
As a leading company of floor covering in Japan, TOLI has been taking care of numerous numbers of projects in our
home market for 100 years.
Since 1980’s, we also started to focus on overseas market, and thanks to great efforts of our partners in each coun-
try, TOLI is now becoming familiar on a worldwide basis as well.
Here are the major projects of TOLI floor for covering in overseas market.
United States
Project Category Product
LIGHTWOOD ·
ALBERTSON’S Vinyl Tile
LINOTESTA
CBS STUDIO Vinyl Tile LIGHTWOOD
CERCUIT CITY Vinyl Tile LIGHTWOOD
GREENVILLE HOSPITAL Vinyl Sheet MATURE NW
Vinyl Tile FASOL PLUS · VIALE
INOVA HOSPITAL
Vinyl Sheet MATURE NW
MAYO CLINIC Vinyl Tile LIGHTSTONE
METHODIST HOSPITAL Vinyl Tile VIALE
OFFICE DEPOT Vinyl Tile LINOTESTA
SAFEWAY Vinyl Tile VIALE
SEARS Vinyl Tile LINOTESTA
U.S. NAVY Vinyl Sheet MATURE NW
Vinyl Tile LINOTESTA
WOMEN’S TOWER
Vinyl Sheet MATURE NW
Mongol
Project Category Product
IBIS STYLES ▲ LINOTESTA (30TC513/30TC524/
Carpet Tile CANNA · VENICHE
ULAANBAATAR HOTEL 30TC541/30TC542)
NEW ULAANBAATAR Carpet Tile GA-100 · OCASH Hospital project in Providence, RI,
INTERNATIONAL Specialty United States
NS4400 AQUATREAD
AIRPORT Flooring
▲ LINOTESTA (30TC515/30TC516/30TC517/30TC523)
School project in Camden, SC, United States
8
▲ FASOL PLUS (FTP2007/FPT2035) ▲ CANNA (GX7705/GX7711/GX7752)
School project in Napoleon, OH, United States IBIS STYLES ULAANBAATAR HOTEL in Ulaanbaatar, Mongol
▲ LIGHTSONE (custom)
School project in Las Vegas, NV, United States
9
China & Hong Kong Project Category Product
SHANGHAI WORLD
Project Category Product Carpet Tile GA-100S
FINANCIAL CENTER
ACORN INTERNATIONAL Carpet Tile OCASH etc.
TIAN JING WANG TONG Carpet Tile GA-100
AEON SHOPPING MALL GA-100 · GA-100W · TWGHS WONG CHO
Carpet Tile
IN WUHAN GA-3600 etc. TONG DISTRICT ELDERLY Vinyl Sheet NONWAXLEUM NW
GA-100 · CANNA · COMMUNITY CENTRE
ASCOTT Carpet Tile
DC-1100 etc.
BANK OF CHINA,
Carpet Tile GA-100 Taiwan
SHANGHAI Project Category Product
BANK OF NINGBO Carpet Tile GA-100W Carpet Tile GA-400
BN PARIBAS BANK
BEIJING HE-ZE OFFICE Carpet Tile MT-2000 Vinyl Tile MATICO V
CHINA EVERBRIGHT MODERNO · CHANG HUA CHRISTIAN
Carpet Tile Vinyl Sheet SF FLOOR NW
BANK, BEIJING H.Q. GA-8100 (discontinued) UNIVERSITY HOSPITAL
DALIAN MEDICAL CHINA STEEL CORPO-
Carpet Tile GA-100 Carpet Tile GA-100
UNIVERSITY RATION, TAIWAN
DADUGUO ELEMEN-
GE DALIAN Carpet Tile GA-100 Vinyl Sheet SF FLOOR NW
TARY SCHOOL
HK INDEPENDENT FUHAN DESIGN BUILDING Carpet Tile SLALOM
COMMISION AGAINST Carpet Tile SOKOITARI
Carpet Tile GA-100S
CORRUPTION OFFICE
Vinyl Sheet NONWAXLEUM NW
HK YWCA EILEN LI DIS- HEZUO BANK LL FREE 100NW (dis-
Vinyl Sheet MATURE NW Specialty
TRICT ELDERLY CENTER continued) · NS4400
Flooring
Carpet Tile GA-100 AQUATREAD
HONDA R&D CENTER
Vinyl Tile MATICO V MEDICAL UNIVERSITY Vinyl Tile MATICO V
IN GUANGZHOU
Vinyl Sheet HOSPILEUM NW HOSPITAL Vinyl Sheet MATURE NW
GA-100 · MERCURIES LIFE Specialty
Carpet Tile LL FREE 40 NW-EX
INDUSTRIAL & GA-8100 (discontinued) INSURANCE Flooring
COMMERCIAL BANK, NICHIREN SHOSHU
Specialty Carpet Tile GA-3600
BEIJING LL300P (discontinued) HONKOIN
Flooring
TAICHUNG COOPERA-
LUNG HANG SHOPPING Carpet Tile GA-100S etc.
Vinyl Tile ROYAL STONE TIVE BANK
CENTRE TAIPEI 101 Carpet Tile GA-400
MICROSOFT SHANGHAI Carpet Tile CORENTE V etc. TAIWAN MACDONALD Vinyl Tile SLATE SQUARE
PUDONG DEVELOP- GX-200 · CANNA · TAOYUAN INTERNA-
Vinyl Tile MS PLAIN
MENT BANK NANNING Carpet Tile SOKOITARI INSPIRA- TIONAL AIRPORT
BRANCH TION etc. VICTORIA KINDERGARTEN Vinyl Sheet HITOE GRANZA
10
▲ SRONE (GX9051V/GX9052V/GX9053V) ▲ GA-3600 (GA3636)
Office project in Shanghai, China NICHIREN SHOSHU HONKOIN in Taipei, Taiwan
▲ MS PLAIN (custom)
TAOYUAN INTERNATIONAL AIRPORT in Taipei, Taiwan
11
Korea Project Category Product
Project Category Product AMERTA INDAH
Carpet Tile GA-400S
OTSUKA
EASTSPRING
Carpet Tile GA-100W · GA-3600 Carpet Tile GA-100W · MAYORICA
INVESTMENTS BCA PLUIT
HOTEL DENIM Carpet Tile GA-8700 Vinyl Tile ROYAL WOOD
HOTEL HYATT Vinyl Tile ROYAL WOOD BNI BANK Carpet Tile SOKOITARI GRANDAIR
ILSHIN SPINNING Vinyl Tile REFRIPE GA-100S · GA-100W ·
Carpet Tile
GA-100 · YUTAKA1000
LOHB’S Carpet Tile BRIDGESTONE Vinyl Tile MATICO V
GA-520 (discontinued)
Specialty
LOTTE DEPARTMENT LL FREE 40 NW-EX
Vinyl Tile FASOL PLUS Flooring
STORE (HQ)
GA-100 · GA-100W, COMMERCIAL BANKING GA-100W ·
Carpet Tile
LOTTE FITIN Carpet Tile MT-5000 (discontin- CENTER MANDIRI BANK SOKOITARI CLASSIC
ued) etc. ENSO HOTEL Carpet Tile GA-400S
LOTTE SHOPPING MALL HONDA PROSPECT
Vinyl Tile FASOL PLUS Carpet Tile GA-400S
(SUWON) MOTOR
GA-100W · SOKOITARI JABIL NEW FACTURING Carpet Tile SOKOITARI CLASSIC
LOTTE SKY PARK Carpet Tile
INSPIRATION etc. JAYA OBAYASHI OFFICE Carpet Tile CORENTE V
MICHAEL KORS Carpet Tile GA-3600 KRAMA YUDHA
Carpet Tile GA-400S
Carpet Tile ROYAL WOOD TIGABERLIAN MOTOR
NAVER LINE
Vinyl Tile GA-400 MENARA ASTRA Carpet Tile GA-540
ONITSUKA TIGER Vinyl Tile PIESTA GA-100W ·
MITSUBISHI MOTOR Carpet Tile
SAMSUNG LIFE YUTAKA1000
Carpet Tile SOKOITARI
INSURANCE CO. MITSUI SUMITOMO
SHINDOLIM FASOL PLUS · Carpet Tile YUTAKA1000
Vinyl Tile INSURANCE GROUP
TECHNOMART LINOTESTA Specialty
DRAWLINE · RESO- OMRON SUPER K SHEET
SK ENERGY CO., LTD Carpet Tile Flooring
NANCE
Vinyl Tile MATICO V
YOUNGPOONG BLDG. Carpet Tile DEEPFIELD (custom) PT. KRAKATAU NIPPON
Specialty
STEEL SUMIKIN SUPER K SHEET
Flooring
Indonesia Vinyl Tile MATICO V
SUMITOMO MITSUI
Project Category Product Specialty
BANK CORP SUPER K SHEET
ACHMAD YANI Flooring
INTERNATIONAL Carpet Tile GA-100W SUZUKI MOTOR Carpet Tile GA-400
AIRPORT SEMARANG Specialty
YAKULT INDONESIA SUPER K SHEET
AEON MALL Carpet Tile GA-400S Flooring
▲ SLALOM (GX9402V)
FUHAN DESIGN BUILDING in Taipei, Taiwan
★The product names indicated in this list conform to the latest product names.
12
▲ HITOE GRANZA (HTE1001/HTE1004/HTE1011/HTE1012/HTE1017)
VICTORIA KINDERGARTEN in Taichung, Taiwan
16
▲ MATURE NW (FS3043)
FIRST WORLD HOTEL in Genting Highlands, Malaysia
▲ CANNA (GX7711)
NINOY AQUINO INTERNATIONAL AIRPORT in Manila, Philippines
18
▲ MATURE NW (FS3081) · GA-8900 (GA8901/GA8904/GA8906)
SAMITIVEJ JAPANESE HOSPITAL in Bangkok, Thailand
20
▲ ETRICO (GX8601) ▲ EXCHROME EXC-5000 (EXC5001)
SIXT in Bangalore, India ANSR in Bangalore, India
22
▲ GA-100W (GA1802W) ▲ HITOE FINE (HTE2003)
TOYOTA ADELAIDE in Adelaide, Australia YHA HOSTEL in Auckland, New Zealand
▲ GA-100W (GA1953W)
BUREAU OF METEOROLOGY in Melbourne, Australia
25
United Arab Emirates Project Category Product
Project Category Product FEWA - AJMAN Carpet Tile GA-100W
Carpet Tile GA-100W FIRST GULF BANK Carpet Tile RUSCELLO
ABU DHABI GLOBAL G4S OFFICE Carpet Tile YUTAKA1000
Specialty
MARKET LL FREE 40 NW-EX
Flooring HAMRIYAA FREE ZONE
Carpet Tile YUTAKA1000
ABU DHABI ISLAMIC AUTHORITY, SHARJAH
Carpet Tile CANNA
BANK HCT-ABU DHABI
Carpet Tile SOKOITARI INSPIRATION
ABU DHABI WOMENS COLLEGE
Carpet Tile YUTAKA1000 HCT-FUJAIRAH
MUNICIPALITY OFFICE Carpet Tile YUTAKA2000
WOMENS COLLEGE
ABU DHABI SECURITIES
Carpet Tile YUTAKA1000 HDFC BANK Carpet Tile YUTAKA1000
EXCHANGE
ABU DHABI UNIVERSITY Carpet Tile GA-100 · GA-100W HSBC BANK Carpet Tile EXC-2000 (custom)
ABU DHABI URBAN HUAWEI OFFICE Carpet Tile GA-100W
PLANNING COUNCIL & Carpet Tile YUTAKA1000 IFFCO OFFICE Vinyl Tile ROYAL STONE
MUNICIPALITY (ADUPC) ISUZU TRAINING CENTER Carpet Tile GA-100 · GA-100W
ACWA POWER, KELLOGGS DUBAI Carpet Tile YUTAKA1000
Carpet Tile YUTAKA2000
THE ONE TOWER KOMATSU OFFICE Carpet Tile YUTAKA1000
ADNOC CLINIC, AL AIN Carpet Tile YUTAKA1000 RARECLOUD V
MASHREQ BANK Carpet Tile
AGODA Carpet Tile GA-100 · GA-100W (discontinued)
AL HILAL BANK Carpet Tile GA-100W MERAAS OFFICE Carpet Tile GA-100W · ETRICO
AL TADAWI HOSPITAL Carpet Tile YUTAKA1000 MERCEDES-BENZ CARS
Carpet Tile YUTAKA1000
MIDDLE EAST FZE
AMITY SCHOOL Carpet Tile GA-100 · YUTAKA1000
MINISTRY OF CULTURE,
AXA INSURANCE, Carpet Tile YUTAKA1000
Carpet Tile YUTAKA1000 DUBAI
DUBAI
MINISTRY OF FOREIGN
SOKOITARI GRANDAIR + Carpet Tile GX-200
BARCLAYS CAPITAL Carpet Tile AFFAIRS
SOFTBACK PLUS
MODON OFFICES, ABU
BRITISH COUNCIL-ABU Carpet Tile GA-400
Vinyl Tile MS PLAIN DHABI
DHABI
NATIONAL BANK OF
CITI BANK-CEO OFFICE Carpet Tile GX-200 Carpet Tile GA-100
ABU DHABI
CITY UNIVERSITY - NMC, AL AIN TOWER Carpet Tile YUTAKA1000
Carpet Tile YUTAKA1000
AJMAN
NOOR ISLAMIC BANK Carpet Tile RATIO (discontinued)
COMMERCIAL BANK PANALPINA DISTRIBU-
Carpet Tile MT-2000 Carpet Tile YUTAKA1000
INTERNATIONAL TION CENTER
COMMERCIAL BANK OF POLICE OFFICE, ABU
Carpet Tile GX-200 Carpet Tile GA-100W
DUBAI DHABI
COMMUNITY AUTHOR- RAKEZ ONE STOP SHOP Carpet Tile GA-100
Carpet Tile GA-100 · GA-100W
ITY OF DUBAI
GA-100W · YUTAKA2000 ·
Carpet Tile YUTAKA1000 SAMSUNG HEAD OFFICE Carpet Tile
LUCEART
DEYAAR OFFICE Specialty SHARJAH ISLAMIC
LL FREE 40 NW-EX Carpet Tile GA-400
Flooring BANK
YUTAKA1000 · UNIVERSITY OF
DUBAI ISLAMIC BANK Carpet Tile Carpet Tile GA-100W
GA-100W BALAMAND, DUBAI
DUBAI OPERA HOUSE Carpet Tile GA-100 WINANCE INVESTMENT Carpet Tile MORTARCLAY
EMIRATES BUSINESS WIRECARD, DUBAI Carpet Tile GX-200
EX-2000 (custom
CLASS LOUNGE Carpet Tile
green speckled)
(global specification)
Turkey
EMIRATES FLIGHT
TRAINING ACADEMY- Carpet Tile MODERNO Project Category Product
CEO OFFICE ANADOLU BANK Carpet Tile GA-100W
EMIRATES ISLAMIC IKITELLI HOSPITAL Carpet Tile GA-100W · GA-100T
Carpet Tile SOKOITARI
BANK LEMAN KULTUR -
Carpet Tile GA-100W
EMIRATES NBD BANK Carpet Tile YUTAKA1000 ISTANBUL
SOKOITARI TAGO ARCHITECTS Carpet Tile MT-2000
EMIRATES REIT, INDEX Carpet Tile
INSPIRATION
TOWER-DUBAI
Vinyl Tile ROYAL STONE Kuwait
ENOC OFFICE Carpet Tile GA-100W Project Category Product
ETIHAD AIRWAYS Carpet Tile YUTAKA1000 BURGAN BANK Carpet Tile GA-3600
ETISALAT OFFICE, Specialty
Carpet Tile YUTAKA2000 KUWAIT AIRWAYS NS550 GARDENT
DUBAI Flooring
26
▲ GA-100W (GA1702W/GA1707W/GA1709W)
▲ ROYAL WOOD (PWT2373) COMMUNITY AUTHORITY OF DUBAI in Dubai,
REGUS DWTC in Dubai, United Arab Emirates United Arab Emirates
▲ YUTAKA1000 (YU1106)
HAMRIYAA FREE ZONE AUTHORITY in Sharjah, United Arab Emirates
27
Qatar Saudi Arabia
Project Category Product Project Category Product
GA-3600 · GRAVIS II · CHINA RAILWAY
AL WESAYA PROJECT Carpet Tile YUTAKA1000
GX-300 · HAZEFINE · COMPANY
AT BIN MOHMOUD Carpet Tile
SLALOM · EXC-2000 ·
AREA KING FAHAD AIR BASE,
EXC-5000 Carpet Tile YUTAKA1000
TAIF
CIVIL AVIATION
Carpet Tile YUTAKA1000
AUTHORITY KING FAHAD
DOHA BANK Carpet Tile GA-100 RESEARCH FOR Carpet Tile GA-100
ISLAMIC STUDIES
DOHA BANK, DOHA Carpet Tile GA-100
MARRIOTT DIPLOMATIC
DOHA METRO Carpet Tile YUTAKA2000 Vinyl Tile ROYAL STONE
QUARTER
GA-100 · BRUMETONE
Carpet Tile MINISTRY OF HOUSING
EMBASSY OF JAPAN, (discontinued) Carpet Tile GA-3600
DOHA RIYADH
Vinyl Tile MS PLAIN
Vinyl Skirting LONG HABAKI MUDUN OFFICE Carpet Tile YUTAKA1000
GATEWAY QATAR NAHDI WAREHOUSE
Carpet Tile GA-100W Carpet Tile GA-400
OFFICE PROJECT JEDDAH
GERMIN TRADING
Carpet Tile GA-3600 QASSIM UNIVERSITY Carpet Tile YUTAKA2000
OFFICE, DOHA
H.E. SHEIKH FAHAD RABIGH PLUS TECH GLOWNEST
Carpet Tile GA-100 Carpet Tile
OFFICE CENTER (JEDDAH) (discontinued)
GA-100 · BRUMETONE ROYAL AIRFORCE
JAPANESE EMBASSY IN Carpet Tile Carpet Tile GA-100
(discontinued) (RIYADH)
QATAR
Vinyl Tile MS PLAIN
ROYAL SAUDI AIR
MINISTRY OF PUBLIC Carpet Tile GA-100S
Carpet Tile GA-400S FORCE
PROSECUTION BUILDING
QATAR FOUNDATION Carpet Tile YUTAKA2000 SAUDI ARAMCO Carpet Tile GA-100W · YUTAKA1000
28
▲ LIGHTSTONE (PT2812/custom) ▲ YUTAKA1000 (YU1106)
AMERICAN HOSPITAL in Dubai, United Arab Emirates BAIN & CO in Dubai, United Arab Emirates
30
▲ MT-2000 (custom) ▲ GA-100W (custom)
TAGO ARCHITECTS in Istanbul, Turkey ANADOLU BANK in Istanbul, Turkey
▲ YUTAKA1000 (YU1101/YU1102)
E-JUST (EGYPT JAPAN UNIVERSITY OF SCIENCE & TECHNOLOGY ) in Giza, Egypt
32
TOLI Corporation is certified
according to ISO14001
for carpet production.
Carpet Tile
All the 100% nylon carpet tile products from TOLI are
“CRI GREEN LABEL PLUS”-certified.
This will contribute towards points for LEED v4 EQ Credit Low-Emitting
®
Materials.
YUTAKA 1000 SERIES
YU-1100
YU
TA
KA
YUTAKA1000
YUTAKA2000
YUTAK A 2000 is a design-oriented modular
carpet.
YU-2100 “URBAN HARMONY”, featured by its
high-quality deep striped pattern, harmonizes
well with stylish furniture, and creates a high- YU-2200
end urban office space. YU-2200 “NATURE NATURE CRESCENDO
CRESCENDO” has vibrant gradation inspired by
expressive nature. Beautiful colors symbolizing
ocean, forest, and ground will stand out more in
spacious areas. YU-2300 “EARTH RHYME” owns
refined pattern made by overlapping many lattice
designs. Earth-look texture will create a unique
rhythmic floor image, just like a rhyme.
Stylish office space and elegant hospitality
YU-2300
atmosp he re c a n b e ef fe c tive ly c re ate d by EARTH RHYME
YUTAKA 2000.
Notes on Installation Apply the adhesive on the whole surface of the sub-floor thinly and evenly. After drying, when the adhesive becomes translu-
cent, install the tiles. Be careful not to put the tiles too tightly.
Due to striped designs, the crossover point of joints may appear to be misaligned. This is an optical illusion, not a manufac-
Others turing defect.
Please note that the product has the indigenous odor from its materials.
When you store the products,do not pile up more than 6 boxes for a better preservation.
MADE IN JAPAN
YU1101
Carpet
Tile
▲ YU1101/YU1112/YU1113/YU1115/YU1116
▲ YU1101/YU1102/YU1103/YU1109/YU1112
▲ YU1108 ▲ YU1104/YU1105
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 6.0mm
Specification pile height 3.0mm (loop pile)
gauge 1/10 stitch 11.9
MADE IN JAPAN
YU1201
YU1201 YU1204
▲ YU1201/YU1204/YU1207 YU1207
MADE IN JAPAN
YU1312
Carpet
Tile
▲ YU1307/YU1309
▲ YU1307/YU1312
YU2105
Carpet
Tile
▲ YU2101/YU2102/YU2105/YU2110
YU2202
Carpet
Tile
▲ YU2202/YU2204
▲ YU2202/YU2204/YU2205/YU2206
YU2301
YU2301 YU2302
YU2303 YU2304
Carpet
Tile
▲ YU2302/YU2304
▲ YU2301/YU2303
product in 2015.
Carpet
Tile
FPT2029
GA128
Carpet
Tile
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more excellent stain resistance
to soils by adding special Nano finish to the existing
stain release by fluoridation.
GA1204S
GA1207S
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Piece Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 6.5mm
Specification pile height 3.5mm (loop pile)
gauge 1/10 stitch 13.0 yarn weight (oz/sq.yd) 17.7
MADE IN JAPAN
GSA128
GSA144 GSA149
GAG125 GAG155
GAG163
made-to-order products
3 more “Eco-Friendly” GA-100 products
are also available for more than 300m2
of order per color as below.
Any color can be chosen from the standard
® colors of GA-100/GA-100S/GA-100T/ GAG163 GAG149
GA-100W.
For GA-100EM,you can choose from
GA-100W range as well.
GA-100EM
GA-100 with approx. 23% post-consumer & 6%
post-indutrial recycled backing
GAG165 GAG1207S
GA-100AF
GA-100 with deodorant efficacy
GA-100FH
GA-100 with antibacterial efficacy
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Piece Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 6.5mm
Specification pile height 3.5mm (loop pile) / GAN1207S H3.5mm / L 3.0mm (high and low loop pile)
gauge 1/10 stitch 13.0 yarn weight (oz/sq.yd) 17.7
GA-100N is very much suitable for free access floor panel made of metal or resin. However, in case the panel surface is ap-
parently bumpy, GA-100N cannot be tightly stuck. Also, some resins are not exactly compatible with GA-100N's pre-applied
adhesive (e.g. polypropylene), so that the adhesion might be weaker.
You can install GA-100N on the existing vinyl sheet or tile with the flat surface. If you need to remove them again, apply the
Notes on Installation wax sufficiently on the vinyl floor surface before installation.
For GAN1207S, due to striped designs, the crossover point of joints may appear to be misaligned. This is optional illusion, not
a mamufacturing defect.
Do not install GA-100N where you can expect heavy casters will frequently come and go.
Do not install GA-100N on dusty sub-floors such as mortar, nor elastic sub-floors like radiant-heating floors.
All the standard colors from GA-100 are also available in the same specification as GA-100N with more than 300m2 of
Custom Order
order per color. For more information, please contact TOLI sales rep.
Others Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
GAN125 GAN155
GAN163
GAN163 GAN189
GA10212T
Carpet
Tile
▲ GA10212T/GA10214T
GA10223T GA10224T
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more excellent
stain resistance to soils by adding special
Nano finish to the existing stain release
by fluoridation.
※◆The color codes marked with“Nano Clean”
have Nano Clean finish on the surface.
GA10311T
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Piece Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.8mm
Specification pile height 5.0 to 3.0mm (textured loop pile)
gauge 1/10 stitch 14.0 yarn weight (oz/sq.yd) 17.1
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more excellent
stain resistance to soils by adding special
Nano finish to the existing stain release
by fluoridation.
※◆The color codes marked with“Nano Clean”
have Nano Clean finish on the surface.
GA10615T
MADE IN JAPAN
GA1153W
GA1156W GA1157W
Carpet
Tile
▲ GA1153W/GA1155W
GA1154W GA1155W
GA1158W GA1159W
MADE IN JAPAN
GA1403W
GA1404W GA1405W
GA1402W GA1406W
GA1403W GA1401W
▲ GA1402W
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Piece Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.0mm
Specification pile height H 4.0mm / M 3.0mm / L 2.5mm (multi-level loop pile)
gauge 1/10 stitch 10.5 yarn weight (oz/sq.yd) 19.8
GA1801W
GA1801W GA1804W
GA1802W GA1806W
GA1803W GA1810W
▲ GA1804W
MADE IN JAPAN
GA1702W
Carpet
Tile
▲ GA1707W/GA1711W
GA1711W GA1708W
GA1713W GA1709W
MADE IN JAPAN
GA1956W
GA1951W GA1952W
GA1962W GA1963W
GA1965W
Carpet
Tile
▲ GA1953W
MADE IN JAPAN
backing
(Polyester Felt)
vinyl backing layer (lower)
Stocking Product ※Color Number for SOFTBACK PLUS: Add “-FB” after the existing color number. (e.g. GX1952W with SOFTBACK PLUS is GA1952W-FB.)
GA-100T GA-100W
Product Name
BRIGHT PLAIN SPEAR LINE SOFT GRID MILD BRICK RANDOM SILKY LINE SHADOW BLOCK
Page page 54 page 56 page 57 page 58 page 60 page 62 page 64
Overall Thickness
11.3mm 11.0mm 11.3mm 11.3mm 10.0mm 10.0mm 10.5mm
with SOFTBACK PLUS
GA10212T-FB GA10312T-FB GA10612T-FB GA1157W-FB GA1401W-FB GA1701W-FB GA1952W-FB
Stocking Colors
GA10215T-FB GA10315T-FB GA10615T-FB GA1158W-FB GA1402W-FB GA1703W-FB GA1953W-FB
GA10216T-FB GA10316T-FB GA10616T-FB GA1403W-FB GA1704W-FB GA1957W-FB
for SOFTBACK PLUS
GA1708W-FB
GA1709W-FB
SOKOITARI SOKOITARI
GA-100T
Product Name GX-200 GX-300 INSPIRATION GRANDAIR
GA-100W
(GX-8000) (GX-8100)
page 54 to 57
Page page 92 page 96 page 108 page 110
page 58 to 65
All colors of All colors of
Made-to-Order Colors All colors of GA-100T & GA-100W All colors All colors
SOKOITARI SOKOITARI
for SOFTBACK PLUS other than above stocking colors of GX-200 of GX-300
INSPIRATION GRANDAIR
Overall Thickness
with SOFTBACK PLUS 10.0 to 11.3mm 12.5mm 11.5mm 11.0mm 13.0mm
(+3.5mm to the
standard product)
Minimum Order
300m²/color 500m²/color
Quantity
Production Lead Time 6 weeks
※For products other than above, please contact TOLI sales reps.
Carpet
Tile
▲ GA1957W with SOFTBACK PLUS (GA1957W-FB)
▲ GA1401W/GA1403W with SOFTBACK PLUS (GA1401W-FB/ ▲ GX3006 with SOFTBACK PLUS (GX3006-FB)
GA1403W-FB)
product ⊿L grade
GA-100W (regular product) ⊿LL
(Ⅰ)
-2
GA-100W with SOFTBACK PLUS ⊿LL
(Ⅰ)
-3
SOKOITARI INSPIRATION <GX-8000> with SOFTBACK PLUS ⊿LL
(Ⅰ)
-3
GX-300 with SOFTBACK PLUS ⊿LL
(Ⅰ)
-3
GX-200 with SOFTBACK PLUS ⊿LL
(Ⅰ)
-4
SOKOITARI GRANDAIR <GX-8100> with SOFTBACK PLUS ⊿LL
(Ⅰ)
-4
(Slab 150mm thick)
General Building Research Corporation of Japan
MADE IN JAPAN
made-to-order product
Any color from GA-3600 can be “Eco-
Friendly” for more than 1,000m2 of
order per color.
®
GA3609
GA-3600EM
GA-3600 with approx. 23% post-consumer &
texture 1 6% post-indutrial recycled backing
GA3601 GA3603
Carpet
Tile
▲ GA3609/GA3611 ▲ GA3662/GA3663
texture 1 texture 3
GA3661 GA3663
Texture with the feeling of random and Texture with deep shading by overlapped
natural flow. layers.
Free and easy design creates a sense Imbricated block patterns will provide
of depth in the space. comfortable and rhythmic feelings.
texture 4
Texture with a 3-dimensional image by
overlapped lines.
Deep and high-quality spaces can be
created.
GA3662
MADE IN JAPAN
GA3689
texture 4
Carpet
Tile
▲ GA3681/GA3682
GA3690 GA3691
MADE IN JAPAN
texture 5
Soft shading inspired by shimmering water surface
is well expressed by beautiful loop textures.
texture 6
Inspired by translucent image of broadly-spread ice
on the lake surface.
Carpet
Tile
texture 5 texture 6
GA3645 GA3650
▲ GA3645/GA3649
▲ GA3671/GA3678
category: carpet tile Beautiful floor images can be created by monolithic installation.
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Piece Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.0mm
Specification pile height H 4.0mm / L 3.0mm (textured loop pile)
gauge 1/10 stitch 12.0 yarn weight (oz/sq.yd) 19.2
MADE IN JAPAN
GA8701
▲ GA8701
GA8907
GA8901 GA8906
Carpet
Tile
Recommended to be used in hospitals, welfare facilities, school libraries etc.
Add more functions to the carpets without compromising their flexibility.
Slip Resistance Good chemical resistance
Slip accidents take place ■Slip resistance of floor material Drycommonly
Requirement for a consistent resis-
mostly on the dry floor Wet + Dusty tance to chemicals is rather high in
or the floor with water or *$
medical facilities and care home for
sands on its surface, which the elderly where chemicals will be
will become much more HOSPILEUM NW
applied in daily lives. Made of dope
slippery. Carpet products dyed nylon, GA-8900 has a strong
are featured with high slip HOSPILEUM NW+ resistance to discoloration caused by
resistance in any condition UNDER-LAY SHEET dropping of chemicals like sodium
so that it can ensure safety
hypochlorite.
of users. Wooden floor
Measure the sliding resistance (CSR value of synthetic rubber substrate) as per JISA
1454 testing method, both in a dry condition and in a wet + dusty condition. The Sound Insulation
higher CSR value is, the less slippery the floor is. Furthermore, when there’s a big dif-
ference between CSR value in a dry condition and that in a Wet and Dusty condition, Carpet has a good sound
the product tends to be slippery. (Even on the same floor covering, the slip resistance insulation effect which can ■Sound Insulation of floor material
will vary by the shapes of soles.) reduce sound of footsteps or
falling objects in the room. *$
Meets the SEK Special-purpose Standard It’s an ideal floor material for HOSPILEUM NW
hospitals and educational HOSPILEUM NW +
GA-8900 meets the SEK “special-purpose” UNDER-LAY SHEET
kind of bacteria Requirement for Antibacterial Excellent Smoothness for Wheels and Casters
A F
(mandatory testing) Finish (special-purpose) A>F
It is very important for
Staphylococcus
Aureus 3.7 2.7 Passed wheels and casters to move ■Caster rolling performance
Pneumobacillus 3.8 3.1 Passed smoothly on floor in facilities Load: 80kg
MRSA 4.0 2.4 Passed
where wheelchair, wheel Load: 20kg
*$
stretcher and dining car are
Conducted by Japan Dyer’s Inspection Foundation
commonly used. Compared
■Safety Testing
to other carpet tiles, wheels GA-100
Safety Testing Measured Value SEK standard and casters can move more FP
①Acute oral toxicity More than 2000mg/Kg (mouse) More than 2,000mg/kg smoothly on GA-8900.
②Mutagenicity Negative Negative
Test ③Skin irritancy P.I.I value = 0.5 P.I.I. value <2.0
Item
④Skin sensitization Negative Negative
■Testing Method
Measure the travel of a cart with casters on the floor covering of a level surface
Primary stimulation cannot when being loaded and coasting from a slope (of about 10 degree) to the floor. The
⑤Skin patch be seen (Safety is secured)
distance to be measured is from edge of the floor covering on the level surface to the
Conducted by Japan Food Research Laboratories, Life Science Laboratories, and others center of rear caster of the cart when it stops.
▲ GA8901/GA8904/GA8905/GA8906/GA8907/GA8908
FPT2029
GA4001
The color numbers marked ★ can be coordinated with GA-400A, GA4005 ◆★ GA4007 ★ GA4035 ◆★
GA-400S and GA-400RS.
GA4911A (page 80) GA4931A (page 81)
GA4932A (page 81) GA4415S (page 82)
GA4001
GA4485S (page 82) GA4501R (page 83)
GA4601R (page 83) —
GA4911A (page 80) GA4914A (page 80)
GA4003 GA4485S (page 82) GA4486S (page 82)
GA4501R (page 83) —
GA4914A (page 80) GA4915A (page 80)
GA4935A (page 81) GA4405S (page 82) GA4004 ◆★ GA4031 ★ GA4033 ◆★
GA4004 GA4413S (page 82) GA4415S (page 82)
GA4484S (page 82) GA4486S (page 82)
GA4501R (page 83) GA4601R (page 83)
GA4913A (page 80) GA4931A (page 81)
GA4933A (page 81) GA4405S (page 82)
GA4005
GA4481S (page 82) GA4505R (page 83)
GA4605R (page 83) —
GA4007 GA4501R (page 83) GA4505R (page 83)
GA4009 GA4912A (page 80)
GA4010 GA4413S (page 82) — GA4032 ◆★
GA4019 GA4933A (page 81) GA4482S (page 82)
GA4027 GA4912A (page 80) — GA4913A (page 80) GA4481S (page 82)
GA4031 GA4915A (page 80) GA4484S (page 82) GA4035 GA4482S (page 82) GA4483S (page 82)
GA4934A (page 81) GA4483S (page 82) GA4505R (page 83) —
GA4032 GA4487S (page 82) GA4505R (page 83) GA4040 GA4488S (page 82) —
GA4605R (page 83) — GA4041 GA4489S (page 82) —
GA4033 GA4934A (page 81) GA4487S (page 82) GA4042 GA4932A (page 81) GA4489S (page 82)
GA4034 GA4935A (page 81) — GA4043 GA4488S (page 82) —
Carpet
Tile
GA4039 ◆ GA4009 ★ GA4014
GA4913A GA4912A
Carpet
Tile
▲ GA4913A/GA4035 (GA-400 · page 78) ▲ GA4932A/GA4935A/GA4001 (GA-400 · page 78)
GA4932A GA4935A
MADE IN JAPAN
StripeⅠ
Carpet
Tile
surface Polypropylene 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 6.0mm
Specification pile height 3.0mm (loop pile)
gauge 1/10 stitch 14.0 yarn weight (oz/sq.yd) 16.5
GA4501R
GA4501R GA4505R
GA4601R GA4605R
GA-400N is very much suitable for free access floor panel made of metal or resin. However, in case the panel surface is ap-
parently bumpy, GA-400N cannot be tightly stuck. Also, some resins are not exactly compatible with GA-400N’s pre-applied
adhesive (e.g. polypropylene), so that the adhesion might be weaker.
For GAN4405S, due to striped designs, the crossover point of joints may appear to be misaligned. This is optional illusion,
Notes on Installation not a mamufacturing defect.
You can install GA-400N on the existing vinyl sheet or tile with the flat surface. If you need to remove them again, apply the
wax sufficiently on the vinyl floor surface before installation.
Do not install GA-400N where you can expect heavy casters will frequently come and go.
Do not install GA-400N on dusty sub-floors such as mortar, nor elastic sub-floors like radiant-heating floors.
Others Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
GAN4009
Carpet
Tile
surface Polypropylene 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.0mm
Specification pile height H 4.5mm / L 3.0mm (textured loop pile)
gauge 1/10 stitch 12.5 yarn weight (oz/sq.yd) 16.2
GA5401L
Carpet
Tile
▲ GA5556/GA5601 (GA-560 · page 88)
GA5604
GA5601 ◆ GA5602 ◆
Carpet
Tile
surface Polypropylene 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.0mm
Specification pile height H 4.5mm / L 3.0mm (textured loop pile)
gauge 1/10 stitch 12.5 yarn weight (oz/sq.yd) 14.7
GA5702
GA5702 ◆ GA5703 ◆
GA5801
GA5801 ◆ GA5803 ◆
Carpet
Tile
surface Polypropylene 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.0mm
Specification pile height H 4.5mm / L 3.0mm (textured loop pile)
gauge 1/10 stitch 12.5 yarn weight (oz/sq.yd) 14.7
GA5902
GA5901 ◆ GA5902 ◆
MADE IN JAPAN
GX2001 GX2006
GX2008
GX2004 GX2007
GX2005 GX2008
Carpet
Tile
GX2009 GX2015 GX2022 GX2030 GX2035
▲ GX2004/GX2009/GX2010/GX2018/GX2023/GX2032 ▲ GX2001/GX2005/GX2006/GX2010/GX2013/GX2032
MADE IN JAPAN
Carpet
Tile
Way of
Installation Monolithic or Quarter Turn
▲ GX2010-GC4/GX2032-GC4
The standard is all the 4 sides beveling, but it can also In the case of 1 to 3 sides beveling, both sides on the
be done for 1 to 3 sides only. same joint should be beveled as below. Otherwise GRID
CUT cannot exactly stand out on the floor.
cross section
Carpet
Tile
Way of
Installation Quarter Turn
Size of chip:
Size of chip: Size of chip:
10mm x 60mm
25mm x 25mm 25mm x 25mm
Rectangular
Rhombus Square
GX2009-MDT (vertically long) GX2009-MDH GX2009-MDS
Size of chip:
Size of chip:
60mm x 10mm
diameter 25mm
Rectangular
Circle
GX2009-MDV (horizontally long) GX2009-MDE
▲ GX2009-MDS/GX2035-MDS
MADE IN JAPAN
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides
more excellent stain
resistance to soils by
adding special Nano finish
to the existing stain release
by fluoridation.
GX3003
GX3003
GX3001 GX3004
GX3002 GX3005
▲ GX3027/GX2303 (CEMBALO · page 143)
Carpet
Tile
GX3006 GX3012 GX3018 GX3026
MADE IN JAPAN
YSM301
揺 YOH
YSM301 YSM302
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more
excellent stain resistance to soils
by adding special Nano finish
to the existing stain release by
fluoridation.
▲ YSM301
Carpet
Tile
▲ YSM302/TTN3105 (LL FREE 50 NW-EX · page 322)
500mm 500mm
500mm
500mm
▲ YSM301 ▲ YSM302
MADE IN JAPAN
YSM102
灯 TOH
YSM101 YSM102
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more
excellent stain resistance to soils
by adding special Nano finish
to the existing stain release by
fluoridation.
▲ YSM102
Carpet
Tile
▲ YSM101/GX2009 (GX-200 · page 93)
▲ YSM101 ▲ YSM102
®
(YUU) is brought by light, sedately and proudly. Calmly changing beauty is
represented as soft gradation.
category: carpet tile
Carpet
Tile
MADE IN JAPAN
500mm
500mm
YSM403
悠 YUU
YSM401 YSM402
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides
more excellent stain
resistance to soils by
adding special Nano finish
to the existing stain release
by fluoridation.
YSM403 ▲ YSM401
Carpet
Tile
▲ YSM402
500mm 500mm
500mm
500mm
▲ YSM402 ▲ YSM403
MADE IN JAPAN
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more
excellent stain resistance to soils
by adding special Nano finish
to the existing stain release by
fluoridation.
YSM503
香 KOH
YSM501 YSM503
Carpet
Tile
▲ YSM504
▲ YSM501/YSM503
category: carpet tile Cutting edge carpet tiles which won GOOD DESIGN AWARD 2005.
Carpet
Tile
GX7811
(LIGHT BROWN) GX7815 (LIGHT GRAY) GX7812
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition PVC and Glass Fiber
base fabric Nonwoven Polyester backing (Recycled PVC contained)
size 500mm×500mm overall thickness 7.5mm
Specification pile height H 5.0mm / L 3.0mm (textured loop pile)
gauge 1/12 stitch 13.0 yarn weight (oz/sq.yd) 23.6
FPT2029
GX7905
(MEDIUM BROWN) GX7904 (DARK BROWN) GX7905 (DARK GRAY) GX7902 (BLACK) GX7903
FPT2029
GX8011
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more excellent stain resistance
to soils by adding special Nano finish to the existing
stain release by fluoridation.
▲ GX8011/GX8019/GX8021
Carpet
Tile
wavy base fair wind wavy base fair wind
(WHITE GRAY) ◆ GX8011 (WHITE GRAY) ◆ GX8021 (BEIGE) GX8017 (BEIGE) GX8027
(GRAY) GX8012 (GRAY) GX8022 (LIGHT BROWN) GX8015 (LIGHT BROWN) GX8025
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more excellent stain resistance
to soils by adding special Nano finish to the existing
stain release by fluoridation.
▲ GX8111/GX8151
Carpet
Tile
wavy base YUKI pattern
(CHARCOAL GRAY) GX8153 (CHARCOAL GRAY) GX8113 (PEARL WHITE) ◆ GX8116 (COAL BLACK) GX8119
(OAK BROWN) GX8154 (OAK BROWN) GX8114 (ROUGE RED) GX8117 (FOREST GREEN) GX8120
(BARK BROWN) GX8155 (BARK BROWN) GX8115 (INDIGO BLUE) GX8118 (ROYAL PURPLE) GX8121
MADE IN JAPAN
GX4552V
GX4551V
GX4552V
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more
excellent stain resistance to soils
by adding special Nano finish
to the existing stain release by
fluoridation.
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 250mm×1000mm overall thickness 9.3mm
Specification pile height H 5.0mm to L 3.0mm (textured loop pile)
gauge 1/10 stitch 21.0 yarn weight (oz/sq.yd) 25.7
MADE IN JAPAN
GX4652V
GX4651V
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more
excellent stain resistance to soils
by adding special Nano finish
GX4653V
to the existing stain release by
fluoridation.
MADE IN JAPAN
GX9052V
GX9051V ▲ GX9051V/GX9052V/GX9053V
GX9052V GX9054V
GX9053V GX9055V
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 250mm×1000mm overall thickness 8.3mm
Specification pile height H 5.5mm / M 4.0mm / L 3.0mm (textured loop pile)
gauge 1/10 stitch 11.0 yarn weight (oz/sq.yd) 20.1
MADE IN JAPAN
GX9153V
GX9151V
GX9152V
▲ GX9151V/GX9152V GX9153V
MADE IN JAPAN
GX9702V
GX9701V
GX9702V
GX9703V ▲ GX9702V
®
<GX-9250V> inspire the cobblestone lane. Broad and dynamic
floor designs can be created.
category: carpet tile
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 250mm×1000mm overall thickness 9.3mm
Specification pile height H 8.0mm to L 3.0mm (textured loop pile)
gauge 1/10 stitch 14.0 yarn weight (oz/sq.yd) 20.1
MADE IN JAPAN
GX9251V
GX9251V
GX9252V
surface BCF Nylon 100% dyeing method of yarn Solution Dyed and Space Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 250mm×1000mm overall thickness 6.5mm
Specification pile height 3.5mm (loop pile)
gauge 1/10 stitch 14.5 yarn weight (oz/sq.yd) 20.1
GX9311V
GX9301V
GX9307V
GX9301V GX9306V
GX9302V GX9308V
GX9303V GX9309V
®
<GX-9650V> water surface. Sheer persistence to yarn texture and
chromogenic effect will provide a premium feel.
category: carpet tile
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Piece Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 250mm×1000mm overall thickness 8.0mm
Specification pile height H 5.0mm / M 4.5mm / L 3.5mm (textured loop pile:tip sheared)
gauge 1/10 stitch 11.5 yarn weight (oz/sq.yd) 20.6
MADE IN JAPAN
GX9653V
GX9654V GX9652V
GX9655V GX9653V
®
<GX-9850V> pattern variation in 250mm x 1000mm form can also
work well in a small area.
category: carpet tile
Carpet
Tile
MADE IN JAPAN
GX9851V
GX9851V
GX9852V
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Piece Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 250mm×1000mm overall thickness 7.3mm
Specification pile height H 4.5mm / L 3.0mm (textured loop pile)
gauge 1/10 stitch 11.5 yarn weight (oz/sq.yd) 20.1
MADE IN JAPAN
GX9551V
GX9554V
GX9555V GX9551V
GX9556V GX9552V
GX9557V GX9553V
®
<GX-9400V> looks like DNA supercoiling. Amazing bold floor images can
be created.
category: carpet tile
Carpet
Tile
MADE IN JAPAN
GX9402V
GX9401V
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 8.5mm
Specification pile height H 6.0mm / M 5.0mm/ L 3.0mm (textured loop pile)
gauge 1/10 stitch 11.5 yarn weight (oz/sq.yd) 22.1
MADE IN JAPAN
GX3701
GX3701 GX3708
GX3702 GX3705
MADE IN JAPAN
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more
excellent stain resistance to soils
by adding special Nano finish
to the existing stain release by
fluoridation.
GX4511
GX4511 GX4512
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 8.5mm
Specification pile height H 6.0mm to L 3.0mm (textured loop pile)
gauge 1/10 stitch 21.0 yarn weight (oz/sq.yd) 25.7
MADE IN JAPAN
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more
excellent stain resistance to soils
by adding special Nano finish
to the existing stain release by
fluoridation.
GX4611
GX4611
surface BCF Nylon 100% dyeing method of yarn Piece Dyed and Space Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.0mm
Specification pile height H 4.0mm / L 3.0mm (high and low loop pile)
gauge 1/10 stitch 12.5 yarn weight (oz/sq.yd) 18.6
MADE IN JAPAN
GX7701
GX7710 GX7705
Carpet
Tile
▲ GX7701/GX7711/GX7751 ▲ GX7711/GX7752 ▲ GX7701/GX7705/GX7711/GX7751/GX7752
When you install GX7751 or GX7752, please make sure the surface pattern.
In some production batches, right and left sides of the color gradation are reversed towards
the arrow marks on the backing.
®
<GX-8500> reflection. Its color mixture and uneven texture can create a rich
expression.
category: carpet tile
Carpet
Tile
MADE IN JAPAN
GX8502
GX8501 GX8504
GX8502 GX8505
※In GX8502 soft stripes are described within
the pattern. By changing the direction of
installation, you can have different floor
images.
▲ GX8501 GX8503
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 8.5mm
Specification pile height H 5.0mm / M 4.0mm/ L 3.0mm (textured loop pile)
gauge 1/12 stitch 13.0 yarn weight (oz/sq.yd) 19.5
MADE IN JAPAN
GX4134
GX4131 GX4133
MADE IN JAPAN
GX4212
GX4211 GX4212
▲ GX4211/GX4212
®
<GX-6400> are well described in this beautiful scribbling pattern. Combination
of base pattern and line (big scribbling) pattern will create variety of
category: carpet tile amusing floor images.
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.5mm
Specification pile height H 4.0mm / L 2.5mm (textured loop pile: GX6451 to 6452 are tip sheared.)
gauge 1/12 stitch 11.5 yarn weight (oz/sq.yd) 23.3
MADE IN JAPAN
GX6451
Base
GX6402 GX6401
Scribbling
MADE IN JAPAN
GX4701
GX4701 GX4702
®
<GX-4750> changing the direction or being combined with GRANCOUR
<GX-4700>, various floor images can be created.
category: carpet tile
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 8.5mm
Specification pile height H 5.5mm to L 2.0mm (textured loop pile)
gauge 1/10 stitch 11.0 yarn weight (oz/sq.yd) 20.6
MADE IN JAPAN
GX4751
GX4751 GX4752
®
<GX-4300> traditional repair method for porcelain products. Fine shiny lines
will make a unique floor image with a bit of tense.
category: carpet tile
Carpet
Tile
GX4312
GX4311 GX4313
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.5mm
Specification pile height H 5.0mm / M 4.5mm / L 3.0mm (textured loop pile)
gauge 1/12 stitch 11.0 yarn weight (oz/sq.yd) 20.6
MADE IN JAPAN
500mm
500mm GX2121
GX2111
500mm
500mm
GX2121
®
<GX-2400> Once it’s installed, a subtle random design will be spread on the
floor, which can create cool atmosphere.
category: carpet tile
Carpet
Tile
MADE IN JAPAN
GX2402
GX2402 GX2404
®
<GX-6200> surface by tip-sheared finish. TONEDIRECTION’s fine
texture will provide a highly sophisticated floor image.
category: carpet tile
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Piece Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.0mm
Specification pile height H 4.5mm / M 4.0mm / L 3.0mm (textured loop pile : tip sheared)
gauge 1/10 stitch 12.0 yarn weight (oz/sq.yd) 21.8
MADE IN JAPAN
GX6205
GX6202
GX6204 GX6205
MADE IN JAPAN
GX3803
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 8.5mm
Specification pile height 5.5mm (cut pile)
gauge 1/10 stitch 12.0 yarn weight (oz/sq.yd) 29.5
MADE IN JAPAN
GX2801
GX2801 GX2802
GX2805 ▲ GX2802/GX2805
Notes on Installation Apply the adhesive on the whole surface of the sub-floor thinly and evenly. After drying, when the adhesive becomes translu-
cent, install the tiles. Be careful not to put the tiles too tightly.
Occasionally the direction of cut-piles are partly broken in part, which looks like color shading. This is one of the characteris-
tics of cut-pile carpets and not a manufacturing defect.
The position of wavy lines differs on a tile-by-tile basis. In case you do not feel comfortable about the floor after installation,
Others
please change the tiles partly so that it will look natural.
Right after installation, the joints of the tiles could be outstanding. This will be recovered as the passage of time.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
GX8402
GX8401 GX8403
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 9.0mm
Specification pile height H 6.0mm / L 4.0mm (cut and loop pile)
gauge 1/10 stitch 12.0 yarn weight (oz/sq.yd) 29.5
MADE IN JAPAN
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
“Nano Clean”provides more
excellent stain resistance to soils
by adding special Nano finish
to the existing stain release by
fluoridation.
GX5623
GX5623 GX5622
▲ GX5622 GX5624
®
<GX-8300> ---- ORVIE’s 3-dimensional image will be more clearly shown by light
reflection.
category: carpet tile
Carpet
Tile
MADE IN JAPAN
GX8301
GX8301 GX8303
GX8302 ▲ GX8301
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.5mm
Specification pile height H 5.0mm / M 4.0mm / L 3.0mm (textured loop pile)
gauge 1/12 stitch 11.5 yarn weight (oz/sq.yd) 17.7
MADE IN JAPAN
GX2303
▲ GX2307
®
<GX-5100> deep-colored yarns --- with its high-end texture, CALMGRAIN will
convey a sophisticated feeling in your space.
category: carpet tile
Carpet
Tile
MADE IN JAPAN
GX5101
GX5101 GX5104
GX5102 GX5105
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 8.0mm
Specification pile height H 5.0mm to L 2.5mm (textured loop pile)
gauge 1/12 stitch 13.0 yarn weight (oz/sq.yd) 20.6
MADE IN JAPAN
GX6504
GX6501 GX6502
▲ GX6502/GX6504
GX6704
GX6702 GX6703
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed and Space Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 8.0mm
Specification pile height H 6.0mm / M 3.0mm/ L 2.0mm (textured loop pile)
gauge 1/10 stitch 11.5 yarn weight (oz/sq.yd) 19.8
MADE IN JAPAN
GX7001
GX7001
®
<GX-8600> texture of big loop piles, ETRICO will convey the feeling of
high-class woven fabric like tweed.
category: carpet tile
Carpet
Tile
MADE IN JAPAN
GX8601
GX8601 GX8603
NANO
NA
NAANO
ANN
NO
CLEAN
CLE
CL
C LE
O
EANN NANO CLEAN
GX8602 GX8604
GX8605 GX8606
Carpet
Tile
▲ GX8601/GX8602
®
<GX-4900> texture and 3-dimensional feeling are highlighted by multi-colored
yarns.
category: carpet tile
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed and Space Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 8.0mm
Specification pile height H 6.0mm / L 3.0mm (textured loop pile)
gauge 1/12 stitch 11.0 yarn weight (oz/sq.yd) 19.5
MADE IN JAPAN
GX4901
GX4901 GX4902
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed and Space Dyed
Composition
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 7.3mm
Specification pile height H 5.0mm / M 4.0mm / L 3.0mm (textured loop pile)
gauge 1/10 stitch 11.5 yarn weight (oz/sq.yd) 19.2
MADE IN JAPAN
GX5254
GX5251 GX5254
GX5252 GX5255
Others Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
MT2101F
FPT2029
Carpet
Tile
MT2101F MT2102F MT2104F MT2105F
MT3816F
MT3811F MT3815F
MT3821F MT3825F
Carpet
Tile
▲ MT3811F/GX3801 (ALTGLAN · page 138) /TTN3113 (LL FREE 50 NW-EX · page 322)
MT3816F
MT3826F
MT5163F
▲ MT5131F
Carpet
Tile
MT5111F MT5113F MT5141F MT5143F
MT8104F
▲ MT8701F
Carpet
Tile
MT8101F MT8102F MT8104F MT8105F
EXC1002F
FPT2029
Carpet
Tile
▲ EXC1001F/EXC1005F
EXC1014F EXC1024F
EXC1015F EXC1026F
EXC1019F
▲ EXC1019F
MADE IN JAPAN
EXC2018F
FPT2029 EXC2021F EXC2027F EXC2040F
Carpet
Tile
▲ EXC2001/GX2009 (GX-200 · page 93)
For the color numbers marked with ★, SCALE UP 4 program is applicable. (See page 169.)
MADE IN JAPAN
For the color numbers marked with ★, SCALE UP 4 program is applicable. (See page 169.)
Carpet
Tile
▲ EXC2111F/EXC2112F/EXC2129F/EXC2130F/EXC2131F/EXC2132F
EXC2132F EXC2113F
EXC2111F EXC2114F
★EXC2074F, EXC2076F, EXC2079F, EXC2082F and EXC2083F can be used as left and right borders when cut in the middle.
MADE IN JAPAN
EXC5028F
FPT2029 EXC5016 EXC5071 EXC5028F
stocking color stocking color
Carpet
Tile
▲ EXC5044 ▲ EXC5073F
EXC5004F · EXC5005F
● These are combination colors. Order is
EXC5055F · EXC5056F
acceptable when the total quantity of
EXC5065F · EXC5066F
2 colors is more than 30m2.
EXC5067F · EXC5068F
MADE IN JAPAN
500mm
500mm
4 times larger. After it’s scaled up, the
pattern repetition cannot be easily
EXC2116F EXC2116F-4C EXC2116F-4D
recognized and the floor will have an
attractive bold design. 500mm 500mm
Original SCALE UP 4
EXC2116F EXC2116F-4A~4D
Please give us your Submit the Please review the Produce the Please review If you are OK with
budget, lead time, design drawing proposal from prototype the prototype the prototype
quantity, base TOLI. sample tile sample from sample, please
material, pattern, based upon TOLI. place PO.
image, motif and so your request.
forth.
Minimum order quantity: 30m2/design ● Please note that minimum order quantity of Full Order
Order ※For a combination pattern, 30m2 is required for each divided design. System differs from stocking products and other
conditions (e.g. The pattern made by 4 tiles will require 30m2 x 4 designs = 120m2.) made-to-order products.
Design lead time: Please check with TOLI sales rep. ● For the quantity less than minimum requirement,
Prototype lead time: Approx. 2 weeks after design confirmed. please contact TOLI sales rep.
Production lead time: Approx. 3 weeks after order placed. ● Some specific patterns may take extra time for
production due to manufacturing reasons.
● For the design submitted for Full Order System, please
make sure the copyright in advance.
carpet master.
Carpet
Tile
PRS102
PRS101 PRS102
PRS103 PRS104
Carpet
Tile
STEP 1 Remove the Dusts and Sands STEP 2 Remove the Moisture from Shoe Soles
Clean off the dusts and sands in order not to bring indoors. Absorb the moisture from shoe soles and evaporate promptly.
TOLI Dust Control Carpet Tile TOLI Rain Control Carpet Tile
DC-1100 RC-1200
Great Effect of Dust Pocket Retain the Absorbed Water
The hollow of a pile on carpet tile products is called “dust pocket”. RC-1200 has a high-density pile structure which cannot be easily
Dusts and sands dropped from walkers get stuck in these dust crushed by being stepped on. Compared to the regular water-ab-
pockets. DC-1100 has bigger dust pockets which can absorb more sorption mat, the absorbed water will not easily come out. This is
dusts and sands compared to regular carpet tile products. why RC-1200 will not bring the water indoors.
■ Regular water-absorption mat ■ RC-1200
Maximum Water-
2
Absorption Qty: 4.2 liter/m
dust pocket
■ Dust Absorption Qty ■ Water Retention Comparison
(%)
3500 100
95.5
3000 95
2500 90
2000 85
1500 80
77.0
1000 75
500 70
regular water- RC-1200
0 absorption mat
(g/m )
2
regular carpet tile DC-1100
(TOLI GX with loop piles) Easy-to-Dry Structure
Easy-to-Maintain Pile Structure The base fabric of RC-1200 can efficiently spread the absorbed
DC-1100 has bigger dust pockets which can allow better ventila- water in a horizontal direction. By enlarging the superficial content
tion. Because of that, the maintenance by a vacuum cleaner is of the water exposed to the air, it will be more quickly dried up.
easier compared to regular carpet tile products.
■ Vacuuming Efficiency Comparisonv
spread the water
before testing
(%) after 250,000 people
walked (assumption) ■ Water Evaporation Comparison
90 (%)
70 65.1
60
50
70 41.3
40
30
20
50 10
regular carpet tile DC-1100 0
(TOLI GX with loop piles) regular carpet tile RC-1200
(TOLI GX with loop piles)
Separate the entrance into 2 zones and efficiently remove Compared to the entrance mat, there’s no big level difference
“dusts and sands” and “moisture” . caused on the floor. This will decrease the risk of falling.
outdoor indoor
STEP 2
STEP 1
RC-1200
DC-1100
Coarse dusts and sands can be removed by the hollow of piles (dust pocket). The moisture can be absorbed from shoe soles and will not be brought indoors.
Solution Dyed
surface BCF Nylon 100% dyeing method of yarn
Composition (with Monofilament Yarn)
base fabric Nonwoven Polyester backing PVC and Glass Fiber
size 500mm×500mm overall thickness 10.0mm
Specification pile height H 7.0mm / M 5.0mm / L 3.0mm (cut and loop pile)
gauge 1/8 stitch 10.0 yarn weight (oz/sq.yd) 28.0
MADE IN JAPAN
FPT2029
DC1101
DC1101
Carpet
Tile
surface BCF Nylon 100% dyeing method of yarn Solution Dyed
Composition Woven Polypropylene and
base fabric backing PVC and Glass Fiber
Polyester Fiber
size 500mm×500mm overall thickness 8.5mm
Specification pile height H 5.5mm / M 4.5mm/ L 3.0mm (textured loop pile)
gauge 1/12 stitch 11.5 yarn weight (oz/sq.yd) 28.0
MADE IN JAPAN
RC1201
RC1201
Due to fine woven structure and special coating, FABTEX has the FABTEX TILE can also be cleaned with a vacuum cleaner or a
excellent surface strength and stain resistance. tightly wrung- out mop. FABTEX KOSHIKABE can also be cleaned
with a tightly wrung-out towel.
Carpet
Tile
surface coating
Antibacterial, anti-mildew,
and stain-retardant coating
woven vinyl fabric
※All the data are actual test vesults and not guaranteed values.
Composition surface PVC and Polyester fiber backing PVC and Glass Fiber
Specification size 500mm×500mm overall thickness 4.5mm
MADE IN JAPAN
500mm
▲
▲
500mm
FBT401
▲
FBT413 FBT414
Carpet
Tile
Composition surface PVC and Polyester fiber backing PVC and Glass Fiber
Specification size 250mm×1000mm overall thickness 4.5mm
MADE IN JAPAN
FBT451V
FBT452V
▲
250mm
1000mm
▲
▲ FBT421 ▲ FBT401/FBT402
Carpet
Tile
Composition surface PVC and Polyester fiber
Packing 20m/roll
Net Weight 17.6kg /roll
FABTEX KOSHIKABE is F ☆☆☆☆-certified.
IF
FBK601
FBK601
FBM01/02/04
(FABTEX BORDER MOLDING) FBK602
FBH01/02/04
(FABTEX HABAKI) FBK604
▲ FBK602/FBT101/FBM02/FBH02
(1) 4.0mm
Specification overall thickness widthm×length 950mm×20m
(2) 6.0mm
Packing 20m/roll
Net Weight (1) 4.0mm: 19.0kg /roll (2) 6.0mm: 25.5kg /roll
For the adhesion to the surface carpet tiles, please apply TOLI ECO GA Cement.
The standard moisture percentage for installation is 8%.
In case the product is still curled up after unpacked, lay it down for the moment to be recovered before installation.
Install TOLI logo side up (please see the image as below).
There may be a jointed part in one roll, but it does not cause any effect on the quality nor the installation.
When you install 2 different rolls in length direction, each edge should be jointed at the seam.
Notes on Installation (Do not cut in the middle of the sheet.)
After you install UNDERLAY SHEET FOR CARPET TILES, press with a roller until the air inside and the surface wrinkles are
fully removed.
The back side might be discolored, but it does not cause any effect on the performance.
This product is the underlayment designed for carpet tiles. As the underlayment for FABRIC FLOOR, FF UNDERLAY SHEET is
more recommendable.
If you lay heavy stuff such as a furniture, you cannot avoid the residual indentation. In that situation, please lay a bottom
board on the floor covering to break up the heavy load.
Note that the center of the tile may be curled and irregular.
Others
UNDERLAY SHEET FOR CARPET TILES is the underlayment for carpet tile products only. Do not use underneath vinyl tiles,
vinyl sheets, fabtex tile, PRIMECLASS and softback plus.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
Fabric Floor
ATTACK 350 Compact 40cm square tiles. 13 basic solid colors and 4
RIPPLE PALETTE dynamic striped patterns are available.
category: fabric floor
on the top of wood floor, vinyl floor, and ceramic tile etc.
Self-adhesion No need to apply the adhesive.
Recommended with a flat surface
Adhesive from TOLI concrete, mortar, and wooden sub-floor (such as ply-
Entire adhesion TOLI ECO GA Cement
wood)
FTOLI FABRIC FLOOR has a self-adhesive backing, due to which each tile can be installed on the existing wood floor, vinyl
cushion floor, etc. without using any adhesive. In case the floor covering underneath is damaged or has not been sufficiently
stuck on the sub-floor, it might cause damage to the surface of the existing floor covering.
FAfter you open the carton box of TOLI FABRIC FLOOR, small fabric dusts could be seen around the edge of a tile. This has
nothing to do with the quality of the product. Just remove them before installation.
FAfter FABRIC FLOOR is removed, sometimes the surface of the floor (such as wood flooring) might become slippery. In that
case please wipe the floor using a rag with neutral detergent for floor covering use, and afterwards clean the left detergent.
Then it will be recovered.
Notes on Installation FAlso when you use FABRIC FLOOR on the wax-coated existing floor, the trace of the absorbent material on the backing may
temporarily leave on the floor surface. That will disappear with the passage of time. (Please bear in mind that on some
types of wax coating the trace may not be easily disappear.)
FWhen you install TOLI FABRIC FLOOR like an area rug, FF Border and FF Corner Joint will be of your help to deal with the
level difference on the edges.
FWhen you glue down TOLI FABRIC FLOOR entirely on the sub-floor, dilute TOLI ECO GA Cement with water (2 to 1) and apply as the
adhesive. After drying, when the adhesive becomes perfectly transparent, install the tiles. Be careful not to put the tiles too tightly.
FAfter you remove FABRIC FLOOR, sometimes the floor surface might become slippery. In that case, wipe the floor sufficiently
with a rag soaked in neutral detergent. Afterwards remove the detergent left on the floor surface. Then it will be recovered.
FTOLI FABRIC FLOOR is designed for residential use. Other commercial applications such as retail, office, and hospitality should
Others be avoided. Please bear in mind that the product quality cannot be assured in case of the installation other than residential use.
FWhen you wash the tiles in the bathroom, please run a ventilation fan. Otherwise the indigenous odor of the product will remain.
FThe product has the indigenous odor from its materials. Ventilate the room from time to time.
MADE IN JAPAN
AK3551RS AK3552RS
Fabric
Floor
▲ AK3515/AK3519/AK3526
AK2701 AK2702
Fabric
Floor
Specification pile height H5.5mm/L3.0mm (textured loop pile)
gauge 1/8 stitch 10.5 yarn weight (oz/sq.yd) 20.1
AK4501 AK4503
AK5501 AK5504
AK5505 AK5508
AK5503 AK5507
Fabric
Floor
Specification pile height H5.0mm/L3.0mm (high and low loop pile)
gauge 1/10 stitch 11.0 yarn weight (oz/sq.yd) 18.9
MADE IN JAPAN
AK7501
AK7502 ▲ AK7501
MADE IN JAPAN
AK9501 AK9502
Fabric
Floor
Specification pile height H5.0mm / L3.0mm (textured loop pile)
gauge 1/8 stitch 13.5 yarn weight (oz/sq.yd) 16.5
MADE IN JAPAN
FF2101
FF2102 FF2103
Specification pile height H4.0mm / L3.0mm (high and low loop pile)
gauge 1/10 stitch 10.0 yarn weight (oz/sq.yd) 17.7
MADE IN JAPAN
FF2301 FF2302
Fabric
Specification pile height 7.0mm (cut pile)
Floor
gauge 1/10 stitch 10.5 yarn weight (oz/sq.yd) 26.5
FF2401 FF2406
FF2408 FF2407
surface BCF Nylon 100% dyeing method of yarn Solution Dyed and Space Dyed
Composition
base fabric Nonwoven Polyester backing SOFT BACK Q (self-adhesive backing)
size 500mm×500mm overall thickness 7.5mm
Fabric
Floor
MADE IN JAPAN
FF4201 FF4203
Fabric
Floor
Specification pile height H5.0mm / M4.0mm / L3.0mm (textured loop pile)
gauge 1/12 stitch 10.0 yarn weight (oz/sq.yd) 23.6
MADE IN JAPAN
FF2801
MADE IN JAPAN
FF3001
FF3002 ▲ FF3001
Fabric
Floor
Packing 10pcs/box = 2.5m2/box
Net Weight 11.2kg/box
Minimum Order Quantity More than 10pcs (Multiple colors can be mixed within one same order.)
Flame-retardant Fire Defense Law in Japan Authorized No.E2110097
Antistatic Less than 3.0kv (JIS L 1021-16, at 23 degrees centigrade, 25%RH)
Performance
Stain-resistant Stain Release
F ☆☆☆☆ Interior-fabrics Performance Evaluation Conference Certified No.J11-30774
IF
Formaldehyde Radiation
MADE IN JAPAN
Packing 10m/roll
Net Weight 12.8kg /roll
Fabric
Floor
MADE IN JAPAN
FFUS6-10
FFUS6-10
Vinyl Tile
The products with this logo are “FloorScore”-certified.
This will contribute towards points for both LEED v2009 and v4 EQ Credit
Low-Emitting Materials.
MATICO V MATICO V is TOLI’s long seller VCT
product that is well received in terms of
category: vinyl composition tile good cost performance.
JIS Registered No. No. GB0307004 (JIS A 5705 Vinyl Tile Flooring)
Recommended
Adhesive from TOLI
humid mortar and concrete Epo Gray P, US Cement, US Cement (less-smelly), US200
When you install with divider strips on dried mortar and concrete, recommended adhesives are Eco AR600.
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
Notes on Installation
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or thickness, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
MV38
Vinyl
Tile
MV51 MV54 MV58 MV59 MV60
▲ MV46/MV60/MV77
MADE IN JAPAN
TC721
TC704 ▲ TC705/TC735
Vinyl
Tile
TC722 TC725 TC727 TC736
JIS Registered No. No. GB0507188 (JIS A 5705 Vinyl Tile Flooring)
When you install with divider strips on dried mortar and concrete, recommended adhesives are Eco AR600.
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
Notes on Installation For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Others Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
FPT2022
FPT2007 FPT2009 FPT2011
Vinyl
Tile
FPT2022 FPT2024 FPT2017 FPT2044 FPT2023
▲ FPT2007/FPT2024/FPT2025/FPT2028/FPT2031/FPT2034/FPT2048/FPT2077
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
RFT7007
Vinyl
Tile
Recommended renovation Eco AR600
Adhesive from TOLI
humid mortar and concrete Epo Gray P, US Cement, US Cement (less-smelly), US200
When you install with divider strips on dried mortar and concrete, recommended adhesives are Eco AR600.
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
Notes on Installation For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
GNT7503
MADE IN JAPAN
CLT3008
Vinyl
Tile
▲ CLT3001/CLT3002/CLT3003/RFT7001/RFT7002/RFT7003 (REFRIPE · page 204) /GNT7501/GNT7502/GNT7503 (GRANOBLE · page 205)
▲ CLT3001/CLT3002/CLT3003/CLT3004/CLT3005/CLT3006/CLT3007/CLT3008/CLT3009
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax U Wax T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
SRT5002
SRT5001 SRT5004
SRT5002 SRT5005
Vinyl
Tile
Recommended renovation Eco AR600
Adhesive from TOLI
humid mortar and concrete Epo Gray P, US Cement, US Cement (less-smelly), US200
When you install with divider strips on dried mortar and concrete, recommended adhesives are Eco AR600.
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
Notes on Installation For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Others Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
TC607
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Others Please be aware that some rubber casters might cause color-contamination.
Beveled part sometimes gets bleached. This will be recovered by applying the wax.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
MOT2008
Vinyl
dried mortar and concrete Eco AR600
Tile
Recommended
Adhesive from TOLI
humid mortar and concrete Epo Gray P, US Cement, US Cement (less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Others Please be aware that some rubber casters might cause color-contamination.
Beveled part sometimes gets bleached. This will be recovered by applying the wax.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
MOT3501
MOT3501 MOT3502
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
TC501 (2mm) TC502 (2mm) TC504 (2mm) TC505 (2mm) TC506 (2mm)
30TC501 (3mm) 30TC502 (3mm) 30TC504 (3mm) 30TC505 (3mm) 30TC506 (3mm)
TC508 (2mm) TC509 (2mm) TC510 (2mm) TC511 (2mm) TC513 (2mm)
30TC508 (3mm) 30TC509 (3mm) 30TC510 (3mm) 30TC511 (3mm) 30TC513 (3mm)
Vinyl
Tile
TC515 (2mm) TC523 (2mm) TC532 (2mm)
30TC515 (3mm) 30TC523 (3mm) 30TC532 (3mm)
▲ TC513/TC532
▲ TC501/TC533
▲ TC510/TC522
(1) 600mm×600mm
(2) 450mm×450mm
overall thickness 3.0mm size
Specification (3) 300mm×450mm
(4) 100mm×450mm
others Curved-Beveled
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
When you install PIESTA, beveled sides should be faced each other. In case you cut the tiles, do not face cut sides to beveled
sides. Otherwise cut sides will be damaged or dented due to partial load caused by wheels etc.
Beveled part sometimes gets bleached. This will be recovered by applying the wax.
Others The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
VT956
▲ VT959-3045/VT959-1045 ▲ VT955-3045
VT951 VT956
(450mm square) (450mm square)
Vinyl
Tile
VT951-600 VT956-600
(600mm square) (600mm square)
VT952 VT957
(450mm square) (450mm square)
VT952-600 VT957-600
(600mm square) (600mm square)
VT954 VT959
(450mm square) (450mm square)
VT954-600 VT959-600
(600mm square) (600mm square)
VT955 VT958
(450mm square) (450mm square)
VT955-600 VT958-600
(600mm square) (600mm square)
JIS Registered No. No. GB0307004 (JIS A 5705 Vinyl Tile Flooring)
Recommended
Adhesive from TOLI
humid mortar and concrete Epo Gray P, US Cement, US Cement (less-smelly), US200
SLATE SQUARE can be installed with divider strips with 2.0mm thickness.
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
Notes on Installation
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different thickness, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
SL2253
SL2251 SL2255
SL2252 SL2256
SL2253 SL2257
JIS Registered No. No. GB0307004 (JIS A 5705 Vinyl Tile Flooring)
Vinyl
dried mortar and concrete Eco AR600
Tile
Recommended
Adhesive from TOLI
humid mortar and concrete US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
Notes on Installation For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for different size or thickness, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
MS5547
JIS Registered No. No. GB0307004 (JIS A 5705 Vinyl Tile Flooring)
Recommended
Adhesive from TOLI
humid mortar and concrete US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
Notes on Installation For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for different size or thickness, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
MS5662
MS5601 MS5666
Vinyl
Tile
MS5697 MS5690 MS5689 MS5698
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PST2114
Vinyl
Tile
PST2063 PST2070 PST2071 PST2080 PST2082 PST2098 ◆
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
FBefore installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
FFor one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
FThe color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
FThe dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
FPlease be aware that some rubber casters might cause color-contamination.
FPlease note that the product has the indigenous odor from its materials.
MADE IN JAPAN
Vinyl
Tile
PST2144 PST2145 PST2146 PST2147 PST2148 PST2149
▲ PST2135 ▲ PST2139/PST2140/PST2142/PST2155
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
FBefore installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
FFor one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
FThe color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
FThe dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
FPlease be aware that some rubber casters might cause color-contamination.
FPlease note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PST2214 PST2215
▲ PST2166/PST2168
Vinyl
Tile
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PST2029
PST2160 PST2161
image
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PST2181
▲ PST2174/PST2175/PST2176
PST2172 PST2173
Monolithic Reversed
PST2174 PST2175
450mm
450mm
450mm 450mm
PST2176
Vinyl
Tile
PST2183 PST2184 PST2185 PST2186
▲ PST2177 ▲ PST2181
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
FThe dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
FPlease be aware that some rubber casters might cause color-contamination.
FPlease note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PST2196 PST2197
▲ PST2193
Packing 20pcs/box=2.70m2/box
Vinyl
Tile
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement,US Cement(less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis. In case you do not feel comfortable about the floor after installation, please
change the tiles partly so that it will look natural.
Recommended
Maintenance Wax New FB Wax U Wax T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
MADE IN JAPAN
PST2179
PST2179
PST2180
▲ PST2180
Packing 20pcs/box=2.70m2/box
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement,US Cement(less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis. In case you do not feel comfortable about the floor after installation, please
change the tiles partly so that it will look natural.
Recommended
Maintenance Wax New FB Wax U Wax T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
MADE IN JAPAN
PST2204
PST2064 ◆ PST2204
PST2065 ◆ PST2205
PST2066 PST2206
PST2067
▲ PST2065
Packing 33pcs/box=2.97m2/box
Vinyl
Recommended
Tile
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement,US Cement(less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Notes on Installation The color shading differs on a tile-by-tile basis. In case you do not feel comfortable about the floor after installation, please
change the tiles partly so that it will look natural.
Recommended
Maintenance Wax New FB Wax U Wax T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
MADE IN JAPAN
PST2030
PST2079
Packing 20pcs/box=2.70m2/box
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement,US Cement(less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis. In case you do not feel comfortable about the floor after installation, please
change the tiles partly so that it will look natural.
Recommended
Maintenance Wax New FB Wax U Wax T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
MADE IN JAPAN
PST2109
Vinyl
Tile
▲ PST2095/PST2096 ▲ PST2108
PST2136 PST2137
Packing 8pcs/box=3.24m2/box
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement,US Cement(less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis. In case you do not feel comfortable about the floor after installation, please
change the tiles partly so that it will look natural.
Recommended
Maintenance Wax New FB Wax U Wax T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
MADE IN JAPAN
PST2105
Vinyl
Tile
▲ PST2069 ▲ PST2104
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PST2047
Vinyl
Tile
▲ PST2008 ▲ PST2051
Packing 18pcs/box=3.24m2/box
Recommended
Tile
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement(less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Notes on Installation The color shading differs on a tile-by-tile basis. In case you do not feel comfortable about the floor after installation, please
change the tiles partly so that it will look natural.
Recommended
Maintenance Wax New FB Wax U Wax T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
MADE IN JAPAN
PST2033
PST2028
PST2031
PST2033
▲ PST2209 PST2209
Vinyl
Tile
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
Notes on Installation For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Others Please note that the product has the indigenous odor from its materials.
Occasionally a very slight size difference could be seen between different production lots. For designed installation of 4-sides-
beveled tiles, or installation of tiles with the shape of hexagon, trapezium and 900mm square, please adjust the size of a tile as
needed. Otherwise joints should be finished with caulking compound.
MADE IN JAPAN
PST2006
PST2006 PST2042
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PST2014
PST2014 PST2016
PST2018
▲ PST2014/PST2016/PST2018
Vinyl
Tile
Adhesive from TOLI
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
The pattern does not always match on the joint of two tiles.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
PST2076
PST2075 ◆ PST2076 ◆
A C
600mm
600mm
B D
● PST2076
☆ When you install PST2075 and PST2076, please lay 4 tiles (A/B/C/D) as above.
The mark A/B/C/D is indicated on the back of each tile.
▲ PST2075
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please bear in mind that ROYAL STONE (hexagon) may take more time for layout and installation compared to the tiles in
square size.
Please note that the product has the indigenous odor from its materials.
Others
When you install the tiles in hexagon size, you will have a better appearance by finishing the joints with cauking materials.
Occasionally a very slight size difference could be seen between different production lots. For designed installation of 4-sides-
beveled tiles, or installation of tiles with the shape of hexagon, trapezium and 900mm square, please adjust the size of a tile as
needed. Otherwise joints should be finished with caulking compound.
Squareness of tiles are fully checked during the production. However, due to the condition of sub-floor and others, joints
might not be strictly matched in some cases.
PST2035
PST2035 ◆ PST2036 ◆
<Dimension Details>
m 13
0m
0m m
13
130mm
0°
12
130mm
130mm
0°
130mm
12
m 13
0m 0m
13 m
PST2037 ◆ 225mm
PST2035
▲ PST2036/PST2037/PST2038
<Dimension Details>
m 13
0m
0m m
13
130mm
0°
12
130mm
130mm
0° 130mm
12
m 13
0m 0m
13 m
Vinyl
PST2038
Tile
225mm
PST2035
PST2039 ◆
▲ PST2039
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
Occasionally a very slight size difference could be seen between different production lots. For designed installation of 4-sides-beveled
Others tiles, or installation of tiles with the shape of hexagon, trapezium and 900mm square, please adjust the size of a tile as needed.
Otherwise joints should be finished with caulking compound.
Squareness of tiles are fully checked during the production. However, due to the condition of sub-floor and others, joints
might not be strictly matched in some cases.
Please bear in mind that ROYAL STONE (TETRA) may take more time for layout and installation compared to the tiles in
square size.
PST2001
PST2001 ◆ PST2002 ◆
225
50
3
675
3
50
GRID
GRID 1 GRID 2
Vinyl
Tile
HALF
HALF 1 HALF 2
RIBBON
RIBBON 1 RIBBON 2
▲ PST2004
225
DIAMOND
50
DIAMOND 1 DIAMOND 2
3
675
3
50
PST2004 ◆ PST2004
PST2005 ◆
Recommended
Adhesive from TOLI
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
The pattern does not always match on the joint of two tiles.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
PST2217
PST2077 PST2083
PST2078 PST2084
450mm
B D
● PST2081
☆ When you install PST2081, please lay 4 tiles (A/B/C/D) as above.
The mark A/B/C/D is indicated on the back of each tile.
PST2081 PST2085
Vinyl
Tile
▲ PST2086 ▲ PST2216
PST2086 PST2216
PST2087 PST2217
Recommended
Adhesive from TOLI
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
The pattern does not always match on the joint of two tiles.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
PST2072
PST2072
▲ PST2072
Vinyl
Tile
Recommended
Adhesive from TOLI
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
For the dirt and stains stuck on the surface, apply the neutral detergent and remove them by the brush with thin bristles.
Others
Afterwards clean with a vacuum cleaner, a wet rag wrung out tightly, or a mop.
Before applying the wax for maintenance, buff the floor surface sufficiently with a blue pad. Please bear in mind that thick
coating of wax will lessen non-slippery performance. If the slip-retardant effect to oil should be required, do not apply the wax
on the surface.
ROYAL STONE NONS is for the place where you walk with your shoes on. Do not walk on it without your shoes on.
PST2162
PST2162 PST2163
PST2164
Slip Resistance
<in accordance with JIS A 1454 (OY-PULL method), rubber shoes>
C.S.R. value
dry wet and dusty
ROYAL STONE NONS 0.66 0.46
We call “slip-resistant” for the products that can show sufficient non-slip-
▲ PST2162/PST2163/PST2164 pery performance both in dry condition and in wet and dusty condition.
Recommended
Adhesive from TOLI
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PT2802
PT2802 PT2804 PT2803
Vinyl
dried mortar and concrete Eco AR600
Tile
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PWT2341
PWT2341 ◆ OAK
PWT2342 ◆ OAK
▲ PWT2342
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
MIX-AND-MATCH COLOR
900mm
mm
100
PWT2395
PWT2395 ◆
Vinyl
Tile
PWT2418 OAK PWT2433 ◆ CHERRY PWT2434 ◆ CHERRY PWT2435 ◆ CHERRY
T-WAX (Non-shiny and Antibacterial) is recommendable for authentic less- ■TYPE OF BEVELING
glossy patterns from ROYAL STONE and ROYAL WOOD ranges. Even after
applying the wax, the floor can maintain the image of a real stone or wood. ROUND-BEVELING FINE BEVELING
Finish the beveling with a rounded shape. Finish the beveling only on the surface clear
Authentic wood texture can be created on wear layer.
T WAX(Non-shiny& Antibacterial) U WAX the beveled part as well. Beveled lines do not stand out and a high-end
image can be conveyed.
Surface Clear Wear Layer Surface Clear Wear Layer
Backing Layer Backing Layer
▲ PWT2386 ▲ PWT2396
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Others Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PWT2307
Vinyl
Tile
PWT2325 ◆ WALNUT PWT2327 ◆ WALNUT PWT2328 ◆ WALNUT PWT2329 ◆ WALNUT
▲ PWT2306 ▲ PWT2345
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
FFor one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
FThe color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
FThe dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
FPlease be aware that some rubber casters might cause color-contamination.
FPlease note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PWT2372 ◆ OAK PWT2373 VINTAGE FIR PWT2374 VINTAGE FIR PWT2375 ◆ PINE
Vinyl
Tile
PWT2402 WALNUT PWT2403 WALNUT PWT2404 WALNUT PWT2405 ZEBRAWOOD
▲ PWT2401
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
FFor one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
FThe color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
FThe dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
FPlease be aware that some rubber casters might cause color-contamination.
FPlease note that the product has the indigenous odor from its materials.
MADE IN JAPAN
Vinyl
Tile
PWT2429 ◆ NOCE PWT2436 ◆ MAPLE PWT2437 ◆ MAPLE PWT2438 ◆ MAPLE
▲ PWT2443 ▲ PWT2444
Recommended
Tile
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PWT2364
Vinyl
Tile
▲ PWT2340 ▲ PWT2385
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Others Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
PWT2349
▲ PWT2348
size 76.2mm×914.4mm
overall thickness 3.0mm 101.6mm×914.4mm
Specification 152.4mm×914.4mm
others Surface Clear Wear Layer 0.3mm
Vinyl
dried mortar and concrete Eco AR600
Tile
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Others Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
PWT2334
914.4mm
76.2
mm
101.6
914.4mm
mm
914.4mm
152.4
mm
PWT2333 ◆ OAK
914.4mm
76.2
mm
101.6
914.4mm
mm
914.4mm
152.4
mm
PWT2334 ◆ OAK
Recommended
Adhesive from TOLI
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
PWT2302
PWT2326 ◆ OAK
▲ PWT2304
Vinyl
Tile
Recommended
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Others Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
PWT2331
PWT2330 ◆ OAK
PWT2331 ◆ OAK
PWT2332 ◆ OAK
▲ PWT2330
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
PWT2359
PWT2358 PWT2359
PARQUET PARQUET
(OAK)
▲ PWT2358
Vinyl
Tile
Way of Installation (PWT2354 · PWT2355 · PWT2446) Quater Turn
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Others Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PWT2446
PWT2355 ◆ PWT2363
PARQUET OSB
▲ PWT2354
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
PWT2361
PWT2361 ◆
PARQUET
▲ PWT2361
Vinyl
Tile
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
PWT2336
PWT2335 PWT2336
PARQUET PARQUET
▲ PWT2335
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please bear in mind that ROYAL WOOD (hexagon) may take more time for layout and installation compared to the tiles in
square size.
Please note that the product has the indigenous odor from its materials.
Others
When you install the tiles in hexagon size, you will have a better appearance by finishing the joints with cauking materials.
Occasionally a very slight size difference could be seen between different production lots. For designed installation of 4-sides-
beveled tiles, or installation of tiles with the shape of hexagon, trapezium and 900mm square, please adjust the size of a tile as
needed. Otherwise joints should be finished with caulking compound.
Squareness of tiles are fully checked during the production. However, due to the condition of sub-floor and others, joints
might not be strictly matched in some cases.
PWT2360
PWT2360 ◆
<Dimension Details>
m 13
0m
0m m
13
130mm
0°
12
130mm
130mm
0°
130mm
12
m 13
0m 0m
13 m
225mm
PWT2360
Vinyl
Tile
Adhesive from TOLI humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation
should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
Custom Order If you ask for a different size or wear layer, please contact TOLI sales rep.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
PWT2337
PWT2337
PWT2338
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
from TOLI
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
PT1930
PT1614 OAK
Vinyl Sheet
The products with this logo are “FloorScore”-certified.
This will contribute towards points for both LEED v2009 and v4 EQ Credit
Low-Emitting Materials.
Minerals’ own expressive texture and
HITOE GRANZA delicate contrast. Impressive color tones
inspired by nature. New standard pattern
category: low-maintenance vinyl sheet with sheer persistence to authentic
natural beauty.
overall thickness 2.0mm widthm×length 2000mm×9m
Specification
others Antibacterial Finished / Highly Durable UV-Coated Surface
Packing 9m/roll
Net Weight 45.0kg/roll
dried mortar and concrete Eco AR600 / (for heavy traffic area) Epo Gray S
heavy traffic use Epo Gray S
Welding/Seam Finish JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Seams should be heat-welded or finished with TOLI JOINT SHIELD.
TOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Notes on Installation Please do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
As the sub-floor material, the underlayment TOLI UNDERLAY SHEET (page 310) is also workable. Apply the same adhesive for
both upside and downside of the underlayment. Please note that the durability to dynamic load will be degraded when you
install with the underlayment.
When you install HITOE GRANZA in the places where rollaway beds are used (e.g. a patient room of the hospital, a living room
of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and urethane adhesive
such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-floor is less than 8%.
No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out
Recommended tightly. Use the neutral detergent for fixed contamination.
Way of Maintenance Even if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI For a large facility, an abstergent auto scrubber is more recommendable.
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
To prepare the floor which is durable to rolling loads, please fully check the combination of the floor covering, the sub-floor, the
Others adhesive, and the loads. For instance, when the sub-floor is too weak, the floor covering might be destroyed from underneath.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
◆ Durability to Rolling Loads <in accordance with JIS A 1454: Caster Rilling Test>
HTE1002 HITOE GRANZA
Time until the More than 180 minutes Less than 30 minutes
floor covering (1st stage test by (2nd stage test by
swells wheels with 110mm Φ) wheels with 46mm Φ)
1st stage test: JIS A 1454: Caster Rilling Test (load per unit area: approx. 900N/cm2)
2nd stage test: Independent test by TOLI (load per unit area: approx. 2,700N/cm2)
Sheet
Vinyl
▲ HTE1008/HTE1015
Packing 9m/roll
Net Weight 43.2kg/roll
dried mortar and concrete Eco AR600 / (for heavy traffic area) Epo Gray S
heavy traffic use Epo Gray S
The wards and living rooms
Recommended where beds with double-row Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI casters are used
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Sheet
Vinyl
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
To prepare the floor which is durable to rolling loads, please fully check the combination of the floor covering, the sub-floor, the
Others adhesive, and the loads. For instance, when the sub-floor is too weak, the floor covering might be destroyed from underneath.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
HTE2002
HITOE FINE More than 2.0 More than 2.0 More than 2.0
Conducted by KAKEN TEST CENTER
◆ Durability to Rolling Loads <in accordance with JIS A 1454: Caster Rilling Test>
HITOE FINE
Time until the More than 180 minutes Less than 30 minutes
floor covering (1st stage test by (2nd stage test by
swells wheels with 110mm Φ) wheels with 46mm Φ)
1st stage test: JIS A 1454: Caster Rilling Test (load per unit area: approx. 900N/cm2)
2nd stage test: Independent test by TOLI (load per unit area: approx. 2,700N/cm2)
▲ HTE2008
Sheet
Vinyl
▲ HTE2005/HTE2007
Packing 9m/roll
Net Weight 50.8kg/roll (2.0mm) 63.9kg/roll (2.5mm)
dried mortar and concrete Eco Royal Cement, Eco AR600
Recommended humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Welding rod for heat-welding is available on a color-by-color basis.
Welding/Seam Finish
JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Sheet
Vinyl
MADE IN JAPAN
FLOORLEUM PLAIN NW More than 2.0 More than 2.0 More than 2.0
20FL1002 Conducted by KAKEN TEST CENTER
Sheet
Vinyl
▲ 20FL1006/20FL1016
Packing 9m/roll
Net Weight 50.8kg/roll (2.0mm) 63.9kg/roll (2.5mm)
dried mortar and concrete Eco Royal Cement, Eco AR600
Recommended humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Welding rod for heat-welding is available on a color-by-color basis.
Welding/Seam Finish
JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Sheet
Vinyl
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
To prepare the floor which is durable to rolling loads, please fully check the combination of FLOORLEUM MARBLE NW and
Others the sub-floor, the adhesive, and the loads. For instance, when the sub-floor is too weak, FLOORLEUM MARBLE NW might be
destroyed from underneath.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
FLOORLEUM MARBLE NW More than 2.0 More than 2.0 More than 2.0
20FL1503 Conducted by KAKEN TEST CENTER
Sheet
Vinyl
20FL1513 (2.0mm) 20FL1514 (2.0mm) 20FL1515 (2.0mm) 20FL1516 (2.0mm)
25FL1513 (2.5mm) made-to-order 25FL1514 (2.5mm) 25FL1515 (2.5mm) 25FL1516 (2.5mm)
20FL1533 (2.0mm)
25FL1533 (2.5mm) made-to-order
Packing 9m/roll
Net Weight 45.9kg/roll
dried mortar and concrete Eco Royal Cement, Eco AR600
Recommended humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Welding rod for heat-welding is available on a color-by-color basis.
Welding/Seam Finish
JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Seams should be heat-welded or finished with TOLI JOINT SHIELD.
Sheet
Vinyl
TOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Please do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
Notes on Installation
As the sub-floor material, the underlayment like TOLI UNDERLAY SHEET (page 310) is also workable. Apply the same adhe-
sive for both upside and downside of the underlayment. Please note that the durability to dynamic load will be degraded when
you install with the underlayment.
When you install FLOORLEUM SOILUD NW in the places where rollaway beds are used (e.g. a patient room of the hospital,
a living room of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and
urethane adhesive such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-floor
is less than 8%.
No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out
Recommended tightly. Use the detergent for fixed contamination.
Way of Maintenance Even if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI For a large facility, an abstergent auto scrubber is more recommendable.
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
To prepare the floor which is durable to rolling loads, please fully check the combination of FLOORLEUM SOILUD NW and
Others the sub-floor, the adhesive, and the loads. For instance, when the sub-floor is too weak, FLOORLEUM SOILUD NW might be
destroyed from underneath.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
FLOORLEUM SOILUD NW More than 2.0 More than 2.0 More than 2.0
20FL629 Conducted by KAKEN TEST CENTER
Sheet
Vinyl
▲ 20FL625/20FL627
Packing 9m/roll
Net Weight 45.9kg/roll
dried mortar and concrete Eco Royal Cement, Eco AR600
Recommended humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Welding rod for heat-welding is available on a color-by-color basis.
Welding/Seam Finish
JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Seams should be heat-welded or finished with TOLI JOINT SHIELD.
TOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
Sheet
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
Vinyl
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Please do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
Notes on Installation As the sub-floor material, the underlayment like TOLI UNDERLAY SHEET (page 310) is also workable. Apply the same adhe-
sive for both upside and downside of the underlayment. Please note that the durability to dynamic load will be degraded when
you install with the underlayment.
When you install FLOORLEUM FLAKE NW in the places where rollaway beds are used (e.g. a patient room of the hospital,
a living room of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and
urethane adhesive such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-floor
is less than 8%.
No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung
Recommended out tightly. Use the detergent for fixed contamination.
Way of Maintenance Even if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI For a large facility, an abstergent auto scrubber is more recommendable.
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
To prepare the floor which is durable to rolling loads, please fully check the combination of FLOORLEUM FLAKE NW and the sub-floor,
Others the adhesive, and the loads. For instance, when the sub-floor is too weak, FLOORLEUM FLAKE NW might be destroyed from underneath.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
20FL901 20FL902
20FL904
20FL903 20FL904
FLOORLEUM FLAKE NW More than 2.0 More than 2.0 More than 2.0
Conducted by KAKEN TEST CENTER
20FL908 20FL909
Packing 9m/roll
Net Weight 45.9kg/roll
dried mortar and concrete Eco Royal Cement, Eco AR600
Recommended humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Welding rod for heat-welding is available on a color-by-color basis.
Welding/Seam Finish
JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Seams should be heat-welded or finished with TOLI JOINT SHIELD.
TOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
Sheet
Vinyl
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
Please do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
Notes on Installation As the sub-floor material, the underlayment like TOLI UNDERLAY SHEET (page 310) is also workable. Apply the same adhe-
sive for both upside and downside of the underlayment. Please note that the durability to dynamic load will be degraded when
you install with the underlayment.
When you install FLOORLEUM NATTY NW in the places where rollaway beds are used (e.g. a patient room of the hospital, a living
room of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and urethane adhe-
sive such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-floor is less than 8%.
No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung
Recommended out tightly. Use the detergent for fixed contamination.
Way of Maintenance Even if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI For a large facility, an abstergent auto scrubber is more recommendable.
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
To prepare the floor which is durable to rolling loads, please fully check the combination of FLOORLEUM NATTY NW and the sub-floor,
Others the adhesive, and the loads. For instance, when the sub-floor is too weak, FLOORLEUM NATTY NW might be destroyed from underneath.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
20FL307
Packing 9m/roll
Net Weight 45.9kg/roll
dried mortar and concrete Eco Royal Cement, Eco AR600
Recommended humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Welding rod for heat-welding is available on a color-by-color basis.
Welding/Seam Finish
JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Seams should be heat-welded or finished with TOLI JOINT SHIELD.
TOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
Sheet
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
Vinyl
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
Notes on Installation Please do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
As the sub-floor material, the underlayment like TOLI UNDERLAY SHEET (page 310) is also workable. Apply the same adhe-
sive for both upside and downside of the underlayment. Please note that the durability to dynamic load will be degraded when
you install with the underlayment.
When you install FLOORLEUM LATTICE NW in the places where rollaway beds are used (e.g. a patient room of the hospital, a living
room of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and urethane adhesive
such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-floor is less than 8%.
No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung
Recommended out tightly. Use the detergent for fixed contamination.
Way of Maintenance Even if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI For a large facility, an abstergent auto scrubber is more recommendable.
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
To prepare the floor which is durable to rolling loads, please fully check the combination of FLOORLEUM LATTICE NW and the sub-floor,
Others the adhesive, and the loads. For instance, when the sub-floor is too weak, FLOORLEUM LATTICE NW might be destroyed from underneath.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
Packing 9m/roll
Net Weight 41.0kg/roll
Performance Wear Resistance (EN649) Group T
dried mortar and concrete Eco Royal Cement, Eco AR600
heavy traffic use Epo Gray S, US Cement
Recommended The wards and living rooms where beds Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI with double-row casters are used
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Welding rod for heat-welding (antibacterial finished) is available on a color-by-color basis.
Sheet
Welding/Seam Finish
Vinyl
JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Seams should be heat-welded or finished with TOLI JOINT SHIELD.
TOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
Please do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
Notes on Installation For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
As the sub-floor material, the underlayment like TOLI UNDERLAY SHEET (page 310) is also workable. Apply the same adhesive for both upside
and downside of the underlayment. Please note that the durability to dynamic load will be degraded when you install with the underlayment.
When you install SF FLOOR NW in the places where rollaway beds are used (e.g. a patient room of the hospital, a living room
of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and urethane adhesive
such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-floor is less than 8%.
No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out
Recommended tightly. Use the detergent for fixed contamination.
Way of Maintenance Even if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI For a large facility, an abstergent auto scrubber is more recommendable.
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
Custom Order If you ask for a different thickness, please contact TOLI sales rep.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
To structure the heavy duty floor, “sub-floor”, “load”, and “adhesive” will be 3 important factors. Please pay careful attention
Others to the combination of strength of sub-floor, type of adhesive, and load put on the floor.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
28SF4036
Packing 9m/roll
Net Weight 41.0kg/roll
Performance Wear Resistance (EN649) Group T
dried mortar and concrete Eco Royal Cement, Eco AR600
heavy traffic use Epo Gray S, US Cement
Recommended The wards and living rooms where beds Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI with double-row casters are used
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
FWelding rod for heat-welding (antibacterial finished) is available on a color-by-color basis.
Sheet
Welding/Seam Finish
Vinyl
FJOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
FSeams should be heat-welded or finished with TOLI JOINT SHIELD.
FTOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
FWhen you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
FPlease do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
Notes on Installation FFor one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
FAs the sub-floor material, the underlayment like TOLI UNDERLAY SHEET (page 310) is also workable. Apply the same adhesive for both upside
and downside of the underlayment. Please note that the durability to dynamic load will be degraded when you install with the underlayment.
FWhen you install SF FLOOR NW in the places where rollaway beds are used (e.g. a patient room of the hospital, a living room
of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and urethane adhesive
such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-floor is less than 8%.
FNo need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out
Recommended tightly. Use the detergent for fixed contamination.
Way of Maintenance FEven if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI FFor a large facility, an abstergent auto scrubber is more recommendable.
FHigh speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
Custom Order If you ask for a different thickness, please contact TOLI sales rep.
FAt the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
FTo structure the heavy duty floor, “sub-floor”, “load”, and “adhesive” will be 3 important factors. Please pay careful attention
Others to the combination of strength of sub-floor, type of adhesive, and load put on the floor.
FPlease be aware that some rubber casters might cause color-contamination.
FPlease note that the product has the indigenous odor from its materials.
MADE IN JAPAN
28SF4021 28SF4022
F PLAIN WEAVE
28SF4023 28SF4024
Sheet
Vinyl
28SF4025 28SF4026
28SF4027 ▲ 28SF4015
F LINOLEUM
28SF4036 28SF4037
28SF4038 28SF4039
28SF4040 ▲ 28SF4038/28SF4035
Packing 9m/roll
Net Weight 52.2kg/roll
dried mortar and concrete Eco Royal Cement, Eco AR600
heavy traffic use Epo Gray S, US Cement
Recommended
Adhesive from TOLI The wards and living rooms where beds Epo Gray ST, US Cement, US Cement (less-smelly), US200
with double-row casters are used
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Welding rod for heat-welding (antibacterial finished) is available on a color-by-color basis.
Welding/Seam Finish
JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Sheet
Vinyl
MADE IN JAPAN
CAR201
Sheet
Vinyl
▲ CAR201
CAR208 CAR209
◆ Durability to Rolling Loads <in accordance with JIS A 1454: Caster Rilling Test>
CARESAFE NW
Time until the More than 180 minutes Less than 30 minutes
floor covering (1st stage test by (2nd stage test by
swells wheels with 110mm Φ) wheels with 46mm Φ)
1st stage test: JIS A 1454: Caster Rilling Test (load per unit area: approx. 900N/cm2)
2nd stage test: Independent test by TOLI (load per unit area: approx. 2,700N/cm2)
CAR210
Packing 9m/roll
Net Weight 32.6kg/roll
Performance Wear Resistance (EN649) Group T
dried mortar and concrete Eco Royal Cement, Eco AR600
heavy traffic use Epo Gray S, US Cement
Recommended The wards and living rooms where beds Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI with double-row casters are used
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Sheet
Vinyl
MADE IN JAPAN
TS2235
Sheet
Vinyl
TS2213 OAK TS2218 CANE
◆ Antibacterial Performance <in accordance with JIS Z 2801> ◆ Chemical Resistance <in accordance with JIS A 1454>
In JIS testing criteria, when the value is more than 2.0, the A: No change B: Slightly changed C: Changed
D: Eroded (damaged) (overall evaluation based on coloring, material and gloss)
product has sufficient antibacterial property.
Inorganic Acids Alkali
H2SO450% HNO361% HCL37% NH3aq28%
Escherichia Coli Staphylococcus Aureus MRSA HOSPI- B C B A
LEUM Disinfectant
HOSPILEUM NW More than 2.0 More than 2.0 More than 2.0 NW Oxygrnated Hibitane Disinfecting Sodium
Jodoform 3% Welpas
Water 31% Tincture 5% Ehtanol 80% hypochlorite 8~10%
☆ Conducted by KAKEN TEST CENTER. C A A A A A
Packing 9m/roll
Net Weight 32.6kg/roll
Performance Wear Resistance (EN649) Group T
dried mortar and concrete Eco Royal Cement, Eco AR600
heavy traffic use Epo Gray S, US Cement
Recommended The wards and living rooms where beds Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI with double-row casters are used
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Sheet
Welding/Seam Finish
FJOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
FSeams should be heat-welded or finished with TOLI JOINT SHIELD.
FTOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
FWhen you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
FFor one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
FPlease do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
Notes on Installation FAs the sub-floor material, the underlayment like TOLI UNDERLAY SHEET (page 310) is also workable. Apply the same adhe-
sive for both upside and downside of the underlayment. Please note that the durability to dynamic load will be degraded
when you install with the underlayment.
FWhen you install HOSPILEUM NW in the places where rollaway beds are used (e.g. a patient room of the hospital, a living
room of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and urethane
adhesive such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-floor is less
than 8%.
FNo need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out
Recommended tightly. Use the detergent for fixed contamination.
Way of Maintenance FEven if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI FFor a large facility, an abstergent auto scrubber is more recommendable.
FHigh speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
FAt the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
FTo prepare the floor which is durable to rolling loads, please fully check the combination of HOSPILEUM NW and the sub-floor, the
Others adhesive, and the loads. For instance, when the sub-floor is too weak, HOSPILEUM NW might be destroyed from underneath.
FPlease be aware that some rubber casters might cause color-contamination.
FPlease note that the product has the indigenous odor from its materials.
MADE IN JAPAN
F PLAIN WEAVE
Sheet
Vinyl
TS2241 MARBLE TS2242 MARBLE
◆ Durability to Rolling Loads <in accordance with JIS A 1454: Caster Rilling Test>
HOSPILEUM NW
Time until the More than 180 minutes Less than 30 minutes
floor covering (1st stage test by (2nd stage test by
swells wheels with 110mm Φ) wheels with 46mm Φ)
1st stage test: JIS A 1454: Caster Rilling Test (load per unit area: approx. 900N/cm2)
2nd stage test: Independent test by TOLI (load per unit area: approx. 2,700N/cm2)
▲ TS2223
Packing 20m/roll
Net Weight 102.3kg/roll
Performance Wear Resistance (EN649) Group T
dried mortar and concrete Eco Royal Cement, Eco AR600
Recommended humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Welding rod for heat-welding (antibacterial finished) is available on a color-by-color basis.
Welding/Seam
Seam sealer like TOLI Super Seam Liquid can work as well.
Finish
JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Sheet
Vinyl
Seams should be heat-welded or finished with a seam sealing bond. TOLI JOINT SHIELD can also work.
TOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
Please do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
As the sub-floor material, the underlayment like TOLI UNDERLAY SHEET (page 310) is also workable. Apply the same adhe-
sive for both upside and downside of the underlayment. Please note that the durability to dynamic load will be degraded
when you install with the underlayment.
When you install MATURE NW in the places where rollaway beds are used (e.g. a patient room of the hospital, a living room
of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and urethane adhesive
such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-floor is less than 8%.
No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out
Recommended tightly. Use the detergent for fixed contamination.
Way of Maintenance Even if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI For a large facility, an abstergent auto scrubber is more recommendable.
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
Others Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
FS3082
Sheet
Vinyl
FS3015 TERRAZZO FS3016 TERRAZZO FS3017 GRANITE FS3018 GRANITE
FS3031 TERRA COTTA FS3032 TERRA COTTA FS3033 LINOLEUM FS3034 LINOLEUM
Packing 20m/roll
Net Weight 102.3kg/roll
Performance Wear Resistance (EN649) Group T
dried mortar and concrete Eco Royal Cement, Eco AR600
Recommended humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Sheet
Vinyl
FSeams should be heat-welded or finished with a seam sealing bond. TOLI JOINT SHIELD can also work.
FTOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
FWhen you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
FPlease do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
FFor one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
FAs the sub-floor material, the underlayment like TOLI UNDERLAY SHEET (page 310) is also workable. Apply the same adhe-
sive for both upside and downside of the underlayment. Please note that the durability to dynamic load will be degraded
when you install with the underlayment.
FWhen you install MATURE NW in the places where rollaway beds are used (e.g. a patient room of the hospital, a living room
of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and urethane adhesive
such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-floor is less than 8%.
FNo need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out
Recommended tightly. Use the detergent for fixed contamination.
Way of Maintenance FEven if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI FFor a large facility, an abstergent auto scrubber is more recommendable.
FHigh speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
FAt the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
Others FPlease be aware that some rubber casters might cause color-contamination.
FPlease note that the product has the indigenous odor from its materials.
MADE IN JAPAN
Sheet
Vinyl
▲ FS3007 ▲ FS3039
Packing 20m/roll
Net Weight 102.3kg/roll
Performance Wear Resistance (EN649) Group T
dried mortar and concrete Eco Royal Cement, Eco AR600
Recommended humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Sheet
Vinyl
FSeams should be heat-welded or finished with a seam sealing bond. TOLI JOINT SHIELD can also work.
FTOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
FWhen you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
FPlease do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
FFor one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
FAs the sub-floor material, the underlayment like TOLI UNDERLAY SHEET (page 310) is also workable. Apply the same adhe-
sive for both upside and downside of the underlayment. Please note that the durability to dynamic load will be degraded
when you install with the underlayment.
FWhen you install MATURE NW in the places where rollaway beds are used (e.g. a patient room of the hospital, a living room
of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and urethane adhesive
such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-floor is less than 8%.
FNo need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out
Recommended tightly. Use the detergent for fixed contamination.
Way of Maintenance FEven if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI FFor a large facility, an abstergent auto scrubber is more recommendable.
FHigh speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
FAt the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
Others FPlease be aware that some rubber casters might cause color-contamination.
FPlease note that the product has the indigenous odor from its materials.
MADE IN JAPAN
MATURE NW More than 2.0 More than 2.0 More than 2.0
Sheet
Vinyl
▲ FS3051 ▲ FS3060
MADE IN JAPAN
TS7017 TS7001
TS7001
TS7013 TS7005
TS7014 TS7009
TS7016 TS7010
▲ TS7006/TS7010
Sheet
Vinyl
before cleaning
TS7002 TS7011
after cleaning
ďFor the details of maintenance without applying the wax, please contact
TOLI sales rep.
ȘDURABLE TO RUNNING OF CASTERS AND WHEEL CHAIRS
NONWAXLEUM NW has excellent durability to rolling loads like casters and carts.
TS7003 TS7012 It’s recommendable for various projects such as healthcare and welfare facilities
where you can expect heavy traffic by rollaway beds and wheel chairs, and also
education and commercial facilities where carts come and go frequently.
ȔCaster Rolling Test (adhesive: TOLI Epo Gray S)
NONWAXLEUM NW 2.0mm vinyl sheet
◆ Durability to Rolling Loads <in accordance with JIS A 1454: Caster Rilling Test>
NONWAXLEUM NW
Time until the More than 180 minutes More than 30 minutes
floor covering (1st stage test by wheels (2nd stage test by wheels
swells with 110mm Φ) with 46mm Φ)
1st stage test: JIS A 1454: Caster Rilling Test (load per unit area: approx. 900N/cm2)
TS7102 TS7105 2nd stage test: Independent test by TOLI (load per unit area: approx. 2,700N/cm2)
MADE IN JAPAN
TS5002 TS5101
TS5203
TS5003 TS5102
TS5004 TS5103
TS5005
Sheet
Vinyl
TS5208 ASH TS5211 WALNUT TS5203 MAPLE TS5213 CHERRY
▲ TS5211 ▲ TS5205
PO I N T PO
I NT
PO
I NT
1 2 3
Seam joints are Assured strength Simple
least visible. and durability installation
The seam joints of a vinyl Strength and Simple and
sheet are least visible. This is durability are as good easy-to-follow installation
why the floor image will not as welding rods. by taking 4 steps.
be split apart by the joints.
Sheet
Vinyl
The pattern is split apart The pattern is
by visible joints. continuous because of
least visible joints.
PO I N T
strength 110N~130N TOLI JOINT SHIELD has the same strength as welding rod.
Nothing abnormal detected after 180 The required endurance time to dynamic loads is 180 minutes.
durability Therefore this result can be judged as sufficiently durable.
minutes passed.
PO I N T
COMPLETED
Put the liquid on the joint. Cover the joint with the tape. Press and bond with a roller. Remove the tape after curing.
(40minutes in summer / 60minutes in winter)
product name TOLI JOINT SHIELD full set TOLI JOINT SHIELD liquid set spare nozzle set
description “All-in-one” package for JOINT SHIELD The package for JOINT SHIELD Method which 10 spare nozzles for JOINT
Method which has a full set of required tools. has all the required tools except the nozzles. SHIELD Method.
product
category seam finish material for floor covering ー
image
180g/set 180g/set
specification liquid, bottle, tape, installation guide, liquid, bottle, tape, installation guide, 10 spare nozzles
& contents
sponge, and nozzle and sponge
standard qty 50m/set 50m/set ー
number 9 colors ● ● ● ● ● ● ● ● ●
ー
of colors
FL/NS/TS/SF/FS/HTE/CAR + JS FL/NS/TS/SF/FS/HTE/CAR + JS
color code + color number for the selected vinyl sheet + FU + color number for the selected vinyl sheet + EK JSHARI
e.g. FSJS2001FU e.g. FSJS2001EK
※TOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such as heavy stuff or casters), the
seam joints should not be finished with TOLI JOINT SHIELD.
Specification Recommended
Type Packing Net Weight
(thickness) (heightm×length) Adhesive from TOLI
40mm×909mm 2.2kg/box
60mm×909mm 3.2kg/box
SOFT HABAKI 75mm×909mm
25pcs/box
4.3kg/box
100mm×909mm 6.1kg/box
1.7mm
60mm×12m 12m/roll 1.8kg/box
Eco LX
60mm×50m 7.5kg/box Habaki Nori
LONG HABAKI 75mm×50m 50m/roll 9.5kg/box
100mm×50m 13.5kg/box
WIDE HABAKI 300mm×9m 8.8kg/roll
2.0mm 9m/roll
(antibacterial & stain-resistant) 350mm×9m 10.2kg/roll
SASARA HABAKI 1.7mm 330mm×1050mm 10pcs/box 10.8kg/box
Sheet
Vinyl
MADE IN JAPAN
Regular Stock
height type code 12 34 96 31 92 93 97 2 23 25 61 42
rounded TH40 ● ● ● ● ● ● ● ●
40mm
straight TH40RN
rounded TH60 ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲
60mm
straight TH60RN ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■
rounded TH75 ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■
75mm
straight TH75RN ● ● ● ● ● ● ● ● ● ● ● ●
rounded TH100 ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■
100mm
straight TH100RN ● ● ● ● ● ● ● ● ● ● ● ●
WIDE HABAKI (300mm/rounded) WTH300 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
SASARA HABAKI TKH ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
STANDARD
Basic Line
Regular Stock
height type code 19 16 95 56 4 5 78 8 35 22 29 43
rounded TH40 ● ● ●
40mm
straight TH40RN
rounded TH60 ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲
60mm
straight TH60RN ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■
rounded TH75 ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■
75mm
straight TH75RN ● ● ● ● ● ● ● ● ● ● ● ●
rounded TH100 ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■ ●■
100mm
straight TH100RN ● ● ● ● ● ● ● ● ● ● ● ●
WIDE HABAKI (300mm/rounded) WTH300 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
SASARA HABAKI TKH ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Regular Stock
Sheet
Vinyl
height type code 13 15 6 17 71 18
rounded TH40 ● ●
40mm
straight TH40RN
rounded TH60 ●■▲ ●■▲ ●■▲ ●■▲ ●■▲ ●■▲
60mm
straight TH60RN ●■ ●■ ●■ ●■ ●■ ●■
rounded TH75 ●■ ●■ ●■ ●■ ●■ ●■
75mm
straight TH75RN ● ● ● ● ● ●
rounded TH100 ●■ ●■ ●■ ●■ ●■ ●■
100mm
straight TH100RN ● ● ● ● ● ●
WIDE HABAKI (300mm/rounded) WTH300 ★ ★ ★ ★ ★ ★
SASARA HABAKI TKH ◆ ◆ ◆ ◆ ◆ ◆
COLORED
Colored Line
Regular Stock
height type code 38 41 27 40
rounded TH40
40mm
straight TH40RN
rounded TH60 ● ● ● ●
60mm
straight TH60RN
rounded TH75
75mm
straight TH75RN
rounded TH100
100mm
straight TH100RN
WIDE HABAKI (300mm/rounded) WTH300
SASARA HABAKI TKH
▲ TH6038
Packing 18m/roll
Notes on Installation After you install UNDERLAY SHEET, cure the floor for more than 24 hours, and then install the floor covering above.
UNDERLAY SHEET cannot be used for the following floor covering from TOLI.
SUPER K SHEET/SUPER K SHEET EXCELLA/FLOORLEUM FREE/EARTHLEUM/NEW STANLOAD/FACTLEUM/OPELEUM/NS4400
AQUATREAD/DEODORANT NS TOWARE NW (when installed in a restroom) /BATHNA FLORE (when installed in a bathroom) /
BATHNA ARTI (when installed in a bathroom)/BATHNA REAL DESIGN (when installed in a bathroom)/CARESAFE NW.
If you lay heavy stuff such as a furniture, you cannot avoid the residual indentation. In that situation, please lay a bottom
board on the floor covering to break up the heavy load. Normally the load at a grounding point should be less than 10N/cm2.
Others Where you can expect casters or other rolling loads will frequently come and go, the wheel tracks could be outstanding.
Please note that the product has the indigenous odor from its materials.
Please bear in mind that UNDERLAY SHEET is not a sound-proof product. It cannot exactly prevent sound penetration.
MADE IN JAPAN
ULST
<Noise Reduction>
(Criteria for Evaluation) << loud silent >>
Evaluation D C B A
Evaluation B B B D A
Nonwoven Glass
Improvement (dB) 7.7 9.0 13.6 3.1 22.0
Specialty Flooring
The products with this logo are “FloorScore”-certified.
This will contribute towards points for both LEED v2009 and v4 EQ Credit
Low-Emitting Materials.
CIGAHARD PLUS NW CIGAHARD PLUS NW is a multifunctional
vinyl tile with the excellent resistance to
category: cigarettes, chemicals, and rubber stains.
low-maintenance solid vinyl tile No need to apply the wax to maintain.
MADE IN JAPAN
Specialty
Flooring
PT9113 PT9114 PT9119
▲ PT9115/PT9119 ▲ PT9121
No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung
Recommended out tightly. Use the neutral detergent for fixed contamination.
Way of Maintenance For a large facility, an abstergent auto scrubber is more recommendable.
from TOLI High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
Specialty
Flooring
NW-EX series have the wax-repellent surface. Do not apply the wax for maintenance.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Others
The cut-out edges of one tile may not have the surface UV coating. Therefore the gloss levels on the 4 sides are not always even.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
ECT4101 ECT4102
ECT4102
ECT4107 ECT4108
Specialty
Flooring
▲ ECT4101 ▲ ECT4107/ECT4003 (150mm×900mm · page 316)
No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out
Recommended tightly. Use the neutral detergent for fixed contamination.
Way of Maintenance For a large facility, an abstergent auto scrubber is more recommendable.
from TOLI High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
Specialty
Flooring
NW-EX series have the wax-repellent surface. Do not apply the wax for maintenance.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Others
The cut-out edges of one tile may not have the surface UV coating. Therefore the gloss levels on the 4 sides are not always even.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
ECT4004
Specialty
Flooring
▲ ECT4005 ▲ ECT4012/ECT4114 (450mm×450mm · page 315)
ECT4018 MAPLE
When you install LL FREE 40 NW-EX below 15 degrees centigrade, the joints of tiles should retain a very slight gap as thin
Notes on Installation as name cards.
When you install LL FREE 40 NW-EX on the free access floor each tile should be laid to slide over the joint of free access
floor panels in the middle. (The joint of LL FREE 40 NW-EX should not be matched to that of free access floor panels.)
No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung
Recommended out tightly. Use the neutral detergent for fixed contamination.
Specialty
Flooring
Way of Maintenance High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
from TOLI Installation at temperature above 10 degrees centigrade is more recommendable.
NW-EX series have the wax-repellent surface. Do not apply the wax for maintenance.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
In case there’s a level difference, a crevice, or bumpiness on the free access floor, sometimes it could be visible even after
Others
you install the tiles.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
CLOTH
TTN1004
TTN1002 TTN1006 TTN1009
Specialty
Flooring
▲ TTN1122/TTN1201/TTN1202 ▲ TTN1117/TTN1121
F OAK
◆ Antistatic Property to Human Bodies<in accordance with JIS L 1021-16>
Rubber Shoes (kv)
2.0mm vinyl composition tile over3.0
LL FREE 40 NW-EX 0.5
☆ This is the test result at 23 degrees centigrade, 25%RH. Please bear in mind
that antistatic property may differ due to the sub-floor.
TTN1201 TTN1202 TTN1203
F CLOUD
from TOLI
NW-EX series have the wax-repellent surface. Do not apply the wax for maintenance.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
In case there’s a level difference, a crevice, or bumpiness on the free access floor, sometimes it could be visible even after
Others
you install the tiles.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
WOOD
TTN3004 TTN3005
▲ TTN3004
F STONE
Specialty
Flooring
TTN3205 TTN3206 TTN3207 ◆
TTN3216 TTN3217
TTN3303
▲ TTN3303
Way of Installation
Ashlar or Monolithic
Way of Maintenance
Flooring
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
from TOLI
NW-EX series have the wax-repellent surface. Do not apply the wax for maintenance.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
In case there’s a level difference, a crevice, or bumpiness on the free access floor, sometimes it could be visible even after
Others
you install the tiles.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
Specialty
Flooring
TTN3126 ◆ OAK TTN3127 ◆ WALNUT ▲ TTN3125/GX6701 (DEWPOINT · page 146)
Infinite Coordination
Easy-to-coordinate designs with carpet tiles
TTN3128 ◆ WALNUT ●DesignsBLEND
●CRAFT that can be easily coordinated with carpet tiles.
series
By mixing different
Combination textures
of carpet of floor
tiles and vinylcovering,
loose laythe interior
tiles designvariety
will enable will beof
much
floormore stimulating.
images in a moreWhen you
flexible install
way.
Loose
By Layadvantage
taking Tile “LL FREE 50 NW-EX”
of each texture,together with carpet
TOLI CRAFT BLENDtiles, it can
series will expand
provide the range of choicespatterns
easy-to-coordinate for space designs.
based on
the common design concept.
TTN3129 PINE
TTN3130 ◆
TTN3132 ◆ OAK
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
from TOLI
NW-EX series have the wax-repellent surface. Do not apply the wax for maintenance.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
In case there’s a level difference, a crevice, or bumpiness on the free access floor, sometimes it could be visible even after
Others
you install the tiles.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
TTN3802
TTN3801
TTN3802
▲ TTN3802
Specialty
Way of Maintenance
Flooring
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
from TOLI
NW-EX series have the wax-repellent surface. Do not apply the wax for maintenance.
At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
In case there’s a level difference, a crevice, or bumpiness on the free access floor, sometimes it could be visible even after
Others
you install the tiles.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
TTN3602
TTN3601 ◆
TTN3602 ◆
500mm×500mm
overall thickness 5.0mm size 166.7mm×1000mm
Specification
333.3mm×500mm
others Highly Durable UV Coated Surface/Round-Beveled (for 166.7mm×1000mm and 333.3mm×500mm)
FNo need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung
Recommended out tightly. Use the neutral detergent for fixed contamination.
Way of Maintenance
FEven if the wax is applied on the surface, it does not affect the quality of NW series.
from TOLI
FHigh speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
FDo not install where heavy loads on casters frequently come and go.
FThe aluminum layer is inserted in the middle of the tile. Because of that, once it’s deformed, it’s not easy to return to the
original form. After installation, when you remove the tiles for rearranging, flexion might be caused. In that case the tiles
should be re-installed after the flexion is fully recovered.
FAt the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside.
FIn case there’s a level difference, a crevice, or bumpiness on the free access floor, sometimes it could be visible even after
you install the tiles.
FThe dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others
more likely to stick with the deep-embossed surface than the flat surface.
FPlease be aware that some rubber casters might cause color-contamination.
FPlease note that the product has the indigenous odor from its materials.
FCigarette Resistance Loose Lay Tile “LL50CRNW” is particularly focusing on preventing cigarette burns. (Its property is differ-
ent from NW-EX series.)
FThe surface of LL50CRNW is pearskin-finished for any chosen color.
FBeveling of the following colors from LL FREE 50 NW-EX will be altered in LL50CRNW option.
TTN3303 => TTCR3303 (No Beveling)
MADE IN JAPAN
●CIGARETTE RESISTANT LOOSE LAY TILE which can be used on the free access floors
of smoking rooms
TOLI’s original CIGARETTE RESISTANT LOOSE LAY TILE can be installed on the free access floors of smoking rooms.
Because of its excellent burning resistance, smokers can even directly throw out the cigarette or stamp it out on the tile.
LL50CRNW regular loose lay tile LL50CRNW regular loose lay tile
Specialty
Flooring
Recommended No need to apply the maintenance wax on the surface. If you apply the wax, it may affect chemical resistance and other
Way of Maintenance performances.
from TOLI
Please be aware that some rubber casters might cause color-contamination.
In case there’s a level difference, a crevice, or bumpiness on the free access floor, sometimes it could be visible even after you install the tiles.
In case you leave the floor in a wet condition for many hours, LL FREE EXCELLA might be bleached by absorbing water.
Others Please wipe with a dry mop and keep LL FREE EXCELLA always in a dry condition.
The cross-section surface of a tile does not have chemical resistance.
In case a large amount of chemicals are spilt on the floor, the chemicals may flood into the joints of the tiles and reach to
the back side. In that case clean off the chemicals promptly. If necessary, remove the tiles and wipe off sufficiently.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
TT3711
TT3701 TT3703
Recommended
Maintenance Wax “ELEX” from C×S Corporation (Antistatic)
from TOLI
Please be aware that some rubber casters might cause color-contamination.
In case there's a level difference, a crevice, or bumpiness on the free access floor, sometimes it could be visible even after
Others
you install the tiles.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
TT803
TT801 TT802 TT803
(1) 454mm×454mm
Specification overall thickness 2.0mm size (2) 505mm×505mm (for free access floor)
Specialty
Flooring
Custom Order If you ask for a different size or thickness, please contact TOLI sales rep.
505mm×505mm size is for free access floor with the surface material integrated. When you install directly on the sub-
floor, please choose 454mm×454mm size.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
FREE TILE cannot be used for the free access floor with the surface material separated.
Please bear in mind that the antistatic performance might differ according to the kind of sub-floor.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
TT45413
TT45413 (454mm) TT45417 (454mm) TT45425 (454mm)
TT50513 (505mm) TT50517 (505mm) TT50525 (505mm)
TT45426 (454mm) TT45427 (454mm) TT45428 (454mm) TT45439 (454mm) TT45440 (454mm) TT45441 (454mm)
TT50526 (505mm) TT50527 (505mm) TT50528 (505mm) TT50539 (505mm) TT50540 (505mm) TT50541 (505mm)
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
Notes on Installation For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Recommended
Maintenance Wax “ELEX” from C×S Corporation (Antistatic)
from TOLI
Specialty
Flooring
Custom Order If you ask for a different size, please contact TOLI sales rep.
454mm×454mm size is for free access floor with the surface material integrated. When you install directly on the sub-
floor, please choose 300mm×300mm size or 450mm×450mm size (on a custom basis).
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Others Please be aware that some rubber casters might cause color-contamination.
FREE TILE cannot be used for the free access floor with the surface material separated.
Please bear in mind that the antistatic performance might differ according to the kind of sub-floor.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
TT4545519
Packing 18m/roll
Net Weight 91.8kg/roll
Recommended factories (semiconductor or electronic devices) / offices (computer rooms)
Applications
dried mortar and concrete US Cement or Epo Gray ST + Conductive Epo Gray
Recommended heavy traffic use Epo Gray S + Conductive Epo Gray
Adhesive from TOLI
humid mortar and concrete US Cement or Epo Gray S + Conductive Epo Gray
Welding Welding rod for heat-welding is available on a color-by-color basis.
Seams should be heat-welded.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
Notes on Installation For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Earth terminal should be set up for the installation of EARTHLEUM. (Welding rods do not have the conductive property.)
Specialty
Flooring
Recommended
Maintenance Wax “ELEX” from C×S Corporation (Antistatic)
from TOLI
Due to the antistatic chemical inside the product, sometimes the surface might become sticky. Please clean the floor on a
regular basis.
Please be aware that some rubber casters might cause color-contamination.
Others
Please note that the product has the indigenous odor from its materials.
Where you have to keep the dust away (e.g. clean rooms), do not apply the wax.
To set up the conductive floor, the joints should be glued with Conductive Epo Gray, and connected to the earth terminal.
MADE IN JAPAN
TS1001
Packing 9m/roll
Net Weight 36.0kg/roll
Recommended factories (precision machine, pharmaceutical, foods etc.)
Applications
Recommended dried mortar and concrete US Cement, Epo Gray S
Adhesive from TOLI heavy traffic use US Cement, Epo Gray S
Welding Welding rod for heat-welding is available on a color-by-color basis.
Seams should be heat-welded.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
Notes on Installation
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Recommended
Maintenance Wax New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
Specialty
Flooring
from TOLI
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
To prepare the floor which is durable to rolling loads, please fully check the combination of FACTLEUM and the sub-floor,
Others the adhesive, and the loads. For instance, when the sub-floor is too weak, FACTLEUM might be destroyed from underneath.
Even though FACTLEUM can show a good durability to rolling loads, it cannot always prevent the brake trace due to tire
lock, and also the damage caused by welding sparks. Please do not install FACTLEUM where you will use the reach fork by
batteries or the welding machine.
MADE IN JAPAN
TS8521
◆ Durability to rolling loads <in accordance with JIS A 1454: Caster Rolling Test>
FACTLEUM
More than 180 minutes Less than 30 minutes
Time until the floor (1st stage test by wheels with (2nd stage test by wheels with
covering swells
110mm Φ) 46mm Φ)
All the data are actual test results and not guaranteed values.
1st stage test: JIS A 1454: Caster Rolling Test (load per unit area: approx. 900N/cm2)
2nd stage test: Independent test by TOLI (load per unit area: approx. 2,700N/cm2)
Packing 9m/roll
Net Weight 42.3kg/roll
Recommended operation rooms in the hospital
Applications
Recommended dried mortar and concrete Epo Gray S
Adhesive from TOLI heavy traffic use Epo Gray S
Welding Welding rod for heat-welding (antibacterial finished) is available on a color-by-color basis.
Seams should be heat-welded.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
When you install OPELEUM in the places where rollaway beds are used (e.g. a patient room of the hospital, a living room
of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray S should be used even if the humidity of the
sub-floor is less than 8%.
Specialty
Flooring
Recommended To keep antibacterial performance, the antibacterial wax “HEALTH CARE COAT” from C×S Corporation should be applied on
Maintenance Wax the surface.
from TOLI
To prepare the floor which is durable to rolling loads, please fully check the combination of OPELEUM and the sub-floor,
the adhesive, and the loads. For instance, when the sub-floor is too weak, OPELEUM might be destroyed from underneath.
Due to the antistatic chemical inside the product, sometimes the surface might become sticky. Therefore the floor should
Others be cleaned on a regular basis.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they
are more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
Packing 18m/roll
Net Weight 101.5kg/roll
Recommended factories (semiconductor or electronic devices) / offices / hospitals
Applications
Recommended dried mortar and concrete Epo Gray ST
Adhesive from TOLI humid mortar and concrete Epo Gray S
Welding Welding rod for heat-welding is available on a color-by-color basis.
Seams should be heat-welded.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
Notes on Installation
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Recommended
Maintenance Wax “ELEX” from C×S Corporation (Antistatic)
from TOLI
Specialty
Flooring
Custom Order If you ask for a different thickness, please contact TOLI sales rep.
Due to the antistatic chemical inside the product, sometimes the surface might become sticky. Please clean the floor on a
regular basis.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Others
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
Where you have to keep the dust away (e.g. clean rooms), do not apply the wax.
Please bear in mind that the antistatic performance might differ according to the kind of sub-floor.
MADE IN JAPAN
TS333
TS332 TS333
Packing 9m/roll
Net Weight 43.2kg/roll
Recommended laboratories / inspection rooms in the hospital
Applications
Recommended dried mortar and concrete Epo Gray ST / (for heavy traffic area) Epo Gray S
Adhesive from TOLI humid mortar and concrete Epo Gray ST
Welding Welding rod for heat-welding (antibacterial finished) is available on a color-by-color basis. Also epoxy pate is workable.
Seams should be heat-welded or finished with putty.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
Heat-welding will sometimes weaken anti-chemical property. Where the anti-chemical performance is necessary, seams
should be finished with putty.
Recommended No need to apply the maintenance wax on the surface. If you apply the wax, it may affect chemical resistance and other
Way of Maintenance
Specialty
performances.
Flooring
from TOLI
Custom Order If you ask for a different thickness, please contact TOLI sales rep.
Please note that the product has the indigenous odor from its materials. Especially SUPER K SHEET may give off a differ-
ent odor from that of other vinyl sheets because it has high density cross-linking structure.
Do not install SUPER K SHEET in the clean rooms where the cleanness is less than 100 class (ISO 5 class).
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
Others more likely to stick with the deep-embossed surface than the flat surface.
Due to the antistatic chemical inside the product, sometimes the surface might become sticky. Please clean the floor on a
regular basis.
Please be aware that some rubber casters might cause color-contamination.
MADE IN JAPAN
Packing 9m/roll
Net Weight 42.3kg/roll
Recommended laboratories / inspecting rooms / medicament rooms
Applications
dried mortar and concrete Epo Gray ST / (for heavy traffic area) Epo Gray S
Recommended The wards and living rooms
where beds with double-row Epo Gray ST
Adhesive from TOLI casters are used
humid mortar and concrete Epo Gray ST
Welding Weldidng rod for heat-welding (antibacterial finished) is available on a color-by-color basis. Also epoxy pate is workable.
Seams should be heat-welded or finished with putty.
When you install 2 different sheets, each edge should be jointed at the seam.(Do not cut in the middle of the sheet.)
Notes on Installation For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Heat-welding will sometimes weaken anti-chemical property. Where the anti-chemical performance is necessary, seams
should be finished with putty.
Specialty
Flooring
Recommended No need to apply the maintenance wax on the surface. If you apply the wax, it may affect chemical resistance and other
Way of Maintenance
from TOLI performances.
Custom Order If you ask for a different thickness, please contact TOLI sales rep.
Please note that the product has the indigenous odor from its materials. Especially SUPER K SHEET EXCELLA may give off
a different odor from that of other vinyl sheets because it has high density cross-linking structure.
Do not install SUPER K SHEET EXCELLA in the clean rooms where the cleanness is less than 100 class (ISO 5 class).
Others The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Due to the antistatic chemical inside the product, sometimes the surface might become sticky. Please clean the floor on a regular basis.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
TS3701
TS3701 TS3703
TS3711 TS3713
◆ Antistatic Property <in accordance with JIS A 1454>
Surface (Ω) Volume (Ω)
2.0mm vinyl sheet 1.4×1011 3.5×1010
SUPER K SHEET EXCELLA 7.0×109 2.0×109
Packing 20m/roll
Net Weight 106.0kg/roll
Recommended factories (electronic equipments, pharmaceutical, foods etc.)
Applications
Recommended dried mortar and concrete Epo Gray ST
Adhesive from TOLI heavy traffic use Epo Gray S
Welding Welding rod for heat-welding (antibacterial finished) is available on a color-by-color basis. Epoxy pate is also workable.
Seams should be heat-welded.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
Notes on Installation The sub-floor should be reinforced in case it’s fragile.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
should be avoided.
Recommended
Maintenance Wax “ELEX” from C×S Corporation (Antistatic)
Specialty
Flooring
from TOLI
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials. Especially NEW STANLOAD may give off a different
odor from that of other vinyl sheets because it has high density cross-linking structure.
Due to the antistatic chemical inside the product, sometimes the surface might become sticky. Please clean the floor on a regular basis.
Others
To prepare the floor which is durable to rolling loads, please fully check the combination of NEW STANLOAD and the sub-floor,
the adhesive, and the loads. For instance, when the sub-floor is too weak, NEW STANLOAD might be destroyed from underneath.
Where you have to keep the dust away (e.g. clean rooms), do not apply the wax.
Do not install NEW STANLOAD in the clean rooms where the cleanness is less than 100 class (ISO 5 class).
MADE IN JAPAN
before cleaning after cleaning before cleaning after cleaning before cleaning after cleaning
※This is the comparison on the black trace caused by tires and its removal by wet-mopping.
TS905 TS906
Excellent 4 Advantages
Slip Water Thermal Shock
Resistance Drainage Sensitivity Absorption
Fine embossing on the Due to its special Even when you stand Cushioned structure
surface fits your bare surface finish, water barefoot, you do not with a foam layer can
feet. It also has drops are not easily left feel cold. Heat shock absorb the shock when
non-slippery structure on the sheet and will during winter months you fall down. Also foam layer
under wet conditions. dry up quickly. can be prevented. elderly care on bended
knees is not painful. cross-section
●Slip Resistance
Fine embossing on the surface fits your bare feet. It also has non-slippery structure under wet conditions.
C.S.R. value C.S.R.-B value test method evaluation criteria
barefoot
floor covering 0.3% 0.3% Slip Resistance Test (JIS A 1454) When you move on the floor with
dry wet and dusty soapy water wet soapy water sensory test
C.S.R. value Testing assuming the slip caused by rubber-soled your shoes on, C.S.R. value in
shoes. The bigger C.S.R. value is, the less slippery. normal action should be not less
BATHNA REAL DESIGN 0.73 0.49 0.55 1.18 0.99 than 0.4.
Specialty
Flooring
BATHNA FLORE 0.48 1.20 1.07 Testing assuming the slip caused by bare feet. The For the floor covering for
test method is the same as that for C.S.R. value, bathroom use, C.S.R. B value in
BATHNA ARTI 0.50 1.13 1.07 C.S.R.-B value but it’s using more bumpy rubber-soled shoes normal action should be not less
which have similar texture to bare feet. The bigger than 0.7.
rubber flooring for 0.52 1.05 0.93 C.S.R.-B value is, the less slippery.
bath rooms
Install the floor covering on the slope with an From the field test results, if it’s
flooring of a 0.61 inclination of 10/100. After sprinkling 0.3% soapy better than Grade 3, the floor
prefabricated bath (FRP) 1.02 0.85
water on it, shuffle along on the floor covering with covering can work well in the
barefoot bare feet and evaluate how slippery it is. Assuming bathrooms.
ceramic tile 0.47 1.19 1.22
sensory test that “NS550 GARDENT” shows Grade 5 and
NS550 GARDENT 0.62 0.64 1.03 0.99 “FLOORLEUM PLAIN” shows Grade 1, evaluate
each floor covering by relative comparison with
2.0mm vinyl sheet 0.46 0.74 0.63 five-grade scale.
■Water drainage ■Temperature distribution of bare foot shown on the thermal graph
Test method and evaluation criteria for drying characteristics Above photos show that the bare foot on BATHNA REAL DESIGN, BATHNA FLORE, and
BATHNA ARTI has a higher temperature than that on general ceramic tiles. (The average
Test Method Evaluation Criteria temperature of the center part of each bare foot was compared.)
Install the floor covering on the glass plate with After you take a bath at night, the floor
the inclination angle of 2 /100, at 25 degrees covering in the bath room is desired to Test method for thermal sensitization of bare feet
centigrade and 50% of humidity. Spray 400g /m2 completely dry up next morning. Therefore,
of water on the top of it by an atomizer. Measure if the drying is completed within 6 hours, it Step on the floor covering for 10 seconds, at 5 degrees centigrade and 50% of humidity.
the time until the floor covering dries up can be regarded as a suitable product for Measure the temperature of the feet bottom right after that, and check the average.
completely. bathrooms. Compare with the same average for general ceramic tiles and calculate the difference.
●Shock Absorption
Cushioned structure with a foam layer can absorb the shock when you fall down. Also elderly care on bended knees is not painful.
floor covering G value Grade Evaluation Criteria
BATHNA REAL DESIGN 108 A Grade result use application
BATHNA FLORE 110 A S Less than
The place where nasty falls can be expected (e.g. gymnasiums)
100G
BATHNA ARTI 129 B
A 100G to The place where falls can be comparatively expected (e.g. welfare
rubber flooring for 115G facilities, schools)
143 C
bath rooms 115G to The place where people are walking at a normal speed but the
B
flooring of a 130G safety should be secured in case of falls
prefabricated bath (FRP) 148 C
general floor
C The place where people are walking at a normal speed
covering
ceramic tile 147 C
※All the data is based on in-house testing unless otherwise indicated. The figures are actual test values, not guaranteed values.
Packing 9m/roll
Net Weight 45.9kg/roll
Recommended bathrooms
Applications
Recommended humid mortar and concrete Bathna Cement EPO (mildew-proofing)
Adhesive from TOLI
Welding Welding rod for heat-welding (antibacterial and mildew-proofing finished) is available on a color-by-color basis. For walls and
ends, please finish with the antibacterial and mildew-proofing seam sealer TOLI Bathna Seal SS.
Seams should be heat-welded or finished with a seam sealing bond.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
After the installation is completed, one night of acclimation is required before you take a bath.
Notes on Installation Brush cleaning on the sealed part and using casters within a big bath room should be avoided for 2 to 3 days after installation.
Walls and ends should be finished with the seam sealer TOLI Bathna Seal SS.
Please bear in mind that the surface of the vinyl sheet might be whitened if the bath room cannot be in dry condition through the day.
In case the color is changed, dry out sufficiently so that it will entirely recover.
Specialty
Recommended
Flooring
Maintenance Wax No need to apply the maintenance wax on the surface. As a daily maintenance, remove the dirt with a sponge or a brush.
from TOLI
BATHNA ARTI is a vinyl sheet for indoor use. Please avoid the installation in outdoors or semi-outdoors where the floor is
exposed to direct sunlight.
Please bear in mind that surface embossing cannot always match on the joints.
Others BATHNA ARTI could be contaminated by hair dyes or certain kind of dye stuff for towels. Please avoid using those dyes. In
case it’s contaminated, please wash it away immediately.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
BNA2002
▲BNA2004
Ȕ3HUIRUPDQFHRI&DVWHU0RYLQJ
6PRRWKQHVVRI5XQQLQJ
IORRUFRYHULQJ 1R*RRG *RRG 6WDQGVWLOO 9LEUDWLRQ
%$7+1$5($/'(6,*1 P ,QFOLQDWLRQ *UDGH
%$7+1$)/25( P ,QFOLQDWLRQ *UDGH
BNA2001 BNA2002
%$7+1$$57, P ,QFOLQDWLRQ *UDGH
UXEEHUIORRULQJ
IRUEDWKURRPV P ,QFOLQDWLRQ *UDGH
IORRULQJRID
SUHIDEULFDWHGEDWK)53 P ,QFOLQDWLRQ *UDGH
FHUDPLFWLOH P ,QFOLQDWLRQ *UDGH
WHVWPHWKRG HYDOXDWLRQFULWHULD
)URP WKH VORSH ZLWK DQ LQFOLQDWLRQ RI GHJUHHV :KHQ WKH OHQJWK RI PRYH LV PRUH
PRYH WKH FDUW ZLWK FDVWHUV WR WKH KRUL]RQWDO WKDQ P FDVWHUV ZLOO UXQ VPRRWKO\
6PRRWKQHVV VXUIDFH:KHQWKHFDUWVWRSVPHDVXUHWKHOHQJWK RQWKHIORRUFRYHULQJ
RIPRYHRQWKHIORRUFRYHULQJ7KHORDGRQWKHFDUW
RI5XQQLQJ ZHLJKV BNA2003 BNA2004
NJ ZKLFK LV DERXW WKH VDPH ZHLJKW DV
WKHDFWXDOZKHHOFKDLUZLWKDSHUVRQVLWWLQJRQ
,QVWDOO WKH IORRU FRYHULQJ RQ WKH VORSH ZLWK DQ 7KH DYHUDJH LQFOLQDWLRQ RI EDWKURRP
LQFOLQDWLRQ DQG SXW WKH FDUW ZLWK FDVWHUV RQ LW IORRUVLVOHVVWKDQ7KHUHIRUH
6WDQGVWLOO $IWHUDSHUVRQZHLJKLQJNJVWHSVRQWKHFDUW LIWKHWHVWUHVXOWLVPRUHWKDQ
PDNHWKHVORSHDQJOHKLJKHUDQGKLJKHUDWHYHU\ WKH IORRU FRYHULQJ FDQ ZRUN LQ WKH
RI LQFOLQDWLRQ 5HFRUG WKH LQFOLQDWLRQ EDWKURRP ■Corresponding Color Table of
ZKHUHWKHFDUWVWDUWVWRPRYH ●pattern ●close-up the Sealer “BATHNA SEAL SS”
,QVWDOOWKHIORRUFRYHULQJRQWKHVXEIORRUDQGSXW ,I WKH WHVW UHVXOW LV EHWWHU WKDQ color no. of
WKH FDUW ZLWK FDVWHUV RQ LW $IWHU D SHUVRQ *UDGH ZKHUH WKH SHUVRQ LQ WKH color no. BATHNA SEAL SS
ZHLJKLQJ NJ VWHSV RQ WKH FDUW PRYH WKH FDUW ZKHHOFKDLU GRHV QRW IHHO IHDUIXO
BATHNA ARTI
RQ WKH IORRU FRYHULQJ (YDOXDWH KRZ PXFK RI WKHIORRUFRYHULQJFDQZRUNVDIHO\ BNA2001 BNSL2001
YLEUDWLRQ WKH SHUVRQ RQ WKH FDUW IHHOV IRU HDFK approx
9LEUDWLRQ IORRU FRYHULQJ E\ UHODWLYH FRPSDULVRQ ZLWK 160mm BNA2002 BNSL2002
ILYHJUDGHVFDOHDVEHORZ
*UDGHIHHOQRYLEUDWLRQ BNA2003 BNSL2003
*UDGHIHHOYLEUDWLRQVOLJKWO\
*UDGHIHHOYLEUDWLRQEXWQRWIHDUIXO BNA2004 BNSL2004
*UDGHIHHODELWIHDUIXOE\YLEUDWLRQ approx 80mm
Packing 9m/roll
Net Weight 39.3kg/roll
Recommended bathrooms
Applications
Recommended humid mortar and concrete Bathna Cement EPO (mildew-proofing)
Adhesive from TOLI
Welding rod for heat-welding (antibacterial and mildew-proofing finished) is available on a color-by-color basis. For walls and
Welding ends, please finish with the antibacterial and mildew-proofing seam sealer TOLI Bathna Seal SS.
Seams should be heat-welded or finished with a seam sealing bond.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
After the installation is completed, one night of acclimation is required before you take a bath.
Notes on Installation Brush cleaning on the sealed part and using casters within a big bath room should be avoided for 2 to 3 days after installation.
Walls and ends should be finished with the seam sealer TOLI Bathna Seal SS.
Please bear in mind that the surface of the vinyl sheet might be whitened if the bath room cannot be in dry condition through the day.
In case the color is changed, dry out sufficiently so that it will entirely recover.
Specialty
Flooring
Recommended
Maintenance Wax No need to apply the maintenance wax on the surface. As a daily maintenance, remove the dirt with a sponge or a brush.
from TOLI
BATHNA FLORE is a vinyl sheet for indoor use. Please avoid the installation in outdoors or semi-outdoors where the floor is
exposed to direct sunlight.
Please bear in mind that surface embossing cannot always match on the joints.
Others BATHNA FLORE could be contaminated by hair dyes or certain kind of dye stuff for towels. Please avoid using those dyes. In
case it’s contaminated, please wash it away immediately.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
BNF1001
BNF1001 BNF1002
▲BNF1001
ɵ&RUUHVSRQGLQJ&RORU7DEOHRI
BNF1003 BNF1004 ɿSDWWHUQ ɿFORVHXS WKH6HDOHU´%$7+1$6($/66µ
DSSUR[ FRORUQRRI
PP FRORUQR %$7+1$6($/66
DSSUR[
%1) %16/
%$7+1$)/25(
PP
%1) %16/
%1) %16/
%1) %16/
%1) %16/
BNF1005 BNF1006 %1) %16/
Packing 9m/roll
Net Weight 44.1kg/roll
Recommended bathrooms
Applications
Recommended humid mortar and concrete Bathna Cement EPO (mildew-proofing)
Adhesive from TOLI
Sealing For seam joints, walls and ends, please finish with the antibacterial and mlldew-proofing seam sealer TOLI Bathna Seal SS.
Seams should be finished with a seam sealing bond.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
After the installation is completed, one night of acclimation is required before you take a bath.
Notes on Installation Brush cleaning on the sealed part and using casters within a big bath room should be avoided for 2 to 3 days after installation.
Walls and ends should be finished with the seam sealer TOLI Bathna Seal SS.
Please bear in mind that the surface of the vinyl sheet might be whitened if the bath room cannot be in dry condition through the day.
In case the color is changed, dry out sufficiently so that it will entirely recover.
Recommended
Specialty
Maintenance Wax No need to apply the maintenance wax on the surface. As a daily maintenance, remove the dirt with a sponge or a brush.
Flooring
from TOLI
BATHNA REAL DESIGN is a vinyl sheet for indoor use. Please avoid the installation in outdoors or semi-outdoors where the
floor is exposed to direct sunlight.
Please bear in mind that surface embossing cannot always match on the joints.
Others BATHNA REAL DESIGN could be contaminated by hair dyes or certain kind of dye stuff for towels. Please avoid using those
dyes. In case it’s contaminated, please wash it away immediately.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
BNR3001
BNR3001 BNR3002
▲ BNR3004
approx
BNR3001 BNSL3001
34mm
BNR3002 BNSL3002
BNR3003 BNSL3003
BNR3004 BNSL3004
Packing 4.5m/roll
Net Weight 4.4kg/roll
Recommended bathrooms
Applications
Recommended Bathna Wall Cement
humid mortar and concrete
Adhesive from TOLI PLOGHZSURRÀQJDQGOHVVVPHOO\
Sealing Bathna Seal SS for wall and ceiling use
Installation Accessories Installation accessories for BATHNA WALL UNIT are available.
)6HDPVVKRXOGEHKHDWZHOGHGRUÀQLVKHGZLWKDVHDPVHDOLQJERQG
),QFOXVLRQRIDLUZLOOFDXVHWKHEXOJHV:KHQ\RXLQVWDOOUHPRYHWKHDLUVXIÀFLHQWO\DQGERQGÀUPO\ UPO\
)For seam joints, install vertically in the same direction.
))RUGDLO\PDLQWHQDQFHZDVKZLWKKRWZDWHUÀUVWDQGWKHQZLWKFROGZDWHU$IWHUZDUGVZLSHZLWKDQRQDEUDVLYHVSRQJH
UVWDQGWKHQZLWKFROGZDWHU$IWHUZDUGVZLSHZLWKDQRQDEUDVLYHVSRQJH
Notes on Installation Use the neutral detergent for bathrooms depending on the contamination.
)Please bear in mind that highly-abrasive cleaning equipments such as metallic scrubbers, melamine sponges, and cleans-
ers might cause damages or change the surface gloss.
)TOLI BATHNA WALL UNIT is mildew-proof, but in case soap scum is left on the surface, it might be mildewed. Please create
the surroundings where the mildew cannot easily grow. In case it grows, use the mildew cleaner.
Specialty
Flooring
)Do not hit or drag with something sharp-pointed, heavy, and hard. That will cause damages, peel-off, and bulges.
)BATHNA WALL UNIT is designed for residential unit bathrooms. In case the wall has seam joints, level difference, or unevenness
HJRQWKHWRSRIH[LVWLQJWLOHVLWFDQQRWEHLQVWDOOHG$OVRGRQRWXVHIRUWKHFHLOLQJQRUWKHZDOORIDELJEDWKVXFKDVKHDOWKVSD
)Do not put the materials such as towel hangers, mirrors, and soap dishes with double-faced tapes or adhesives. The adhesive ingredient
ZLOOEHWUDQVIHUUHGRQWKHVXUIDFHDQGFDXVHVWDLQVRUGLVFRORUDWLRQ,IVXFKPDWHULDOVQHHGWREHVHWXSEHVXUHWRSXWÀUPO\WRWKHZDOO
UPO\WRWKHZDOO
of January 29th, 2020. ally recovered by drying-out, but try to avoid using hot water for a long period of time.
)Please be aware that some rubber products might cause color-contamination or discoloration.
)When the installation is completed, the bathroom can be used after one night of curing. However, for 2 to 3 days after installa-
tion, do not scrub the sealed part with a brush.
MADE IN JAPAN
BNW121 Eco-friendly
Eco-friendly
■finished image
Specialty
Flooring
This product was discontinued as ceiling: BNW101 wall: BNW121 with installation accessories flooring: BNR3001
(BATHNA REAL DESIGN · page 341)
for BATHNA WALL for BATHNA WALL for BATHNA WALL for BATHNA WALL
form
(W)13mm×(D)0.5mm(salient2.5mm)
Specification (W)10mm×(D)1mm×(L)9m (W)10mm×(D)10mm×(L)9m (W)12mm×(D)3mm×(L)7m
×(L)2.5m
before testing mildew remover drain cleaner hair dye before testing washing with washing with washing with BATHNA wall covering self-adhesive
(before cleaning) water hot water sponge WALL UNIT for a modular decorative
bath room sheet
※All the data are actual test results and not guaranteed values.
Packing 9m/roll
Net Weight 34.2kg/roll
Recommended bathrooms with the toilet and other wet areas
Applications
Recommended humid mortar and concrete Bathna Cement EPO (mildew-proofing)
Adhesive from TOLI
Welding For seam Joints, please finish with the antibacterial and mildew-proofing seam sealer TOLI Bathna Seal SS.
Seams should be heat-welded or finished with a seam sealing bond.
Notes on Installation When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
Walls and ends should be finished with the seam sealer TOLI Bathna Seal SS.
Recommended
Maintenance Wax No need to apply the maintenance wax on the surface. As a daily maintenance, remove the dirt with a sponge or a brush.
from TOLI
LAVANA is a vinyl sheet for indoor use. Please avoid the installation in outdoors or semi-outdoors where the floor is exposed to
direct sunlight.
Specialty
Flooring
Please bear in mind that surface embossing cannot always match on the joints.
LAVANA could be contaminated by hair dyes or certain kind of dye stuff for towels, Please avoid using those dyes. In case
it’s contaminated, please wash it away immediately.
Please use LAVANA in washrooms, bathrooms with the toilet, and other wet areas.
Others
In very wet areas such as a bathroom with the washing place, LAVANA might not provide sufficient non-slippery effects. For
such applications, please use BATHNA FLORE, BATHNA ARTI or BATHNA REALDESIGN.
When LAVANA is installed where water will be used (e.g. dressing room at the golf club house), laying the water absorbing
mat is recommendable in order to maintain non-slippery effect.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
LN9001
LN9001 LN9002
LN9003 LN9004
Cleanliness Hygiene
Stains are hard to stick Inhibit the growth of
and easy to remove! mildew and fungus!
Specialty
Flooring
Non-slippery floor covering No need to remove the existing
with cushion backing. mend LAVANA for floor. Just install on the top of it.
Design
Renovated to the new clean floor.
(※2) C.S.R value:Testing assuming the slip caused by rubber-soled shoes. 2.0mm 2.0mm
C.S.R·B value:Testing assuming the slip caused by bare feet. vinyl vinyl
sheet sheet
Shock Absorption (JIS A 6519)
easily discolored
floor covering test results Grade G value applications
Gymnasium and other places where people are most likely
A less than 100
LAVANA 114G
to fall to the floor Testing of resistance to athlete’s foot fungus <In accordance with JIS Z 2911 Method of Test for Fungus Resistance (Coating)>
Welfare facilities, schools, and other places where people
B 100 to 115G floor covering
are likely to fall to the floor test results
bathrooms Places where people walk in a normal condition but the
C 115 to 130G safety is required in case of falling to the floor Growth of athlete’s foot fungus is not visible to the naked eyes nor under the
LAVANA
with the toilet 148G microscope. (※2)
(FRP) D 2.0mm vinyl sheet Places where people walk in a normal condition
(※2) The test results show fungi and mildews are hard to grow.
Packing 20m/roll
Net Weight 110.3kg (1820mm) / 98.2kg (1620mm) / 80.0kg (1320mm)
Recommended corridors or balconies in the apartment
Applications
dried mortar and concrete Eco Royal Cement, Eco AR600
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Recommended waterproof sub-floor with
Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI urethane coated
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
TOLI NS UNDERLAY SHEET US Cement
Welding rod for heat-welding is available on a color-by-color basis.
Welding Edges should be finished with sealing materials such as TOLI NS Seal/TOLI NS Seal II
Specialty
Flooring
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
Where you can expect the floor will get wet (e.g. open corridor, balcony, and so forth), NS800 should be installed in accordance with the
method for humid mortar and concrete. Heat-weld the joints, and also finish the edges with the sealer such as TOLI NS Seal/TOLI NS Seal II.
Notes on Installation When you need the shock absorbing performance in indoor installation, TOLI UNDERLAY SHEET (page 310) is also workable. Please use
the same adhesive for both top and bottom of UNDERLAY SHEET.
When you need the noise reduction performance to downstairs, TOLI NS UNDERLAY SHEET (page 363) is also workable. For edges,
please use TOLI NS Seal II.
Recommended New FB Wax, U Wax, and T Wax (Non-shiny and Antibacterial) are recommendable. Please apply the wax uniformly and thinly so
Maintenance Wax that it will not be pooled in dented parts of surface embossing.
from TOLI In semi-exterior applications that are frequently exposed to direct sunlight or water, do not apply wax.
Please bear in mind that surface embossing cannot always match on the joints.
When you install NS Sheet for outdoor or semi-outdoor use, it might not fully perform without prescribed inclination.
When you finish the edge with TOLI NS Seal at the a temperature in summer, the bubble might be caused on the joints. You can avoid that by decreas-
ing Liquid B of NS Seal by 50 to 75%. In that case please do not walk on the floor for 24hours after installation because it will take time to be hardened.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are more likely
Others to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
If you install 3 different widths (1820mm/1620mm/1320mm) of the same color together in the same area, the colors might not
exactly match. This is because they cannot be in the same production dye lot.
MADE IN JAPAN
NS884
◆Slip Resistance
<in accordance with JIS A 1454 (OY-PULL method), rubber shoes>
C.S.R. value NS831 (1820mm) NS823 (1820mm)
NS130831 (1320mm) NS130823 (1320mm)
dry wet and dusty
NS806 to 808 0.74 0.55
NS822 to 824 0.70 0.51
NS830 to 832 0.75 0.51
NS855, 856 0.72 0.61
NS857 to 859 0.70 0.51
NS866, 867 0.70 0.53 NS832 (1820mm) NS824 (1820mm)
NS130832 (1320mm) NS130824 (1320mm)
Specialty
Flooring
▲ NS877/NS832 ▲ NS823/NS824
Packing 20m/roll
Net Weight 110.3kg (1820mm) / 98.2kg (1620mm) / 80.0kg (1320mm)
Recommended corridors or balconies in the apartment
Applications
dried mortar and concrete Eco Royal Cement, Eco AR600
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Recommended waterproof sub-floor with
Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI urethane coated
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
TOLI NS UNDERLAY SHEET US Cement
Welding rod for heat-welding is available on a color-by-color basis.
Welding Edges should be finished with sealing materials such as TOLI NS Seal/TOLI NS Seal II
Specialty
Flooring
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
Where you can expect the floor will get wet (e.g. open corridor, balcony, and so forth), NS800 should be installed in accordance with the
method for humid mortar and concrete. Heat-weld the joints, and also finish the edges with the sealer such as TOLI NS Seal/TOLI NS Seal II.
Notes on Installation When you need the shock absorbing performance in indoor installation, TOLI UNDERLAY SHEET (page 310) is also workable. Please use
the same adhesive for both top and bottom of UNDERLAY SHEET.
When you need the noise reduction performance to downstairs, TOLI NS UNDERLAY SHEET (page 363) is also workable. For edges,
please use TOLI NS Seal II.
Recommended New FB Wax, U Wax, and T Wax (Non-shiny and Antibacterial) are recommendable. Please apply the wax uniformly and thinly so
Maintenance Wax that it will not be pooled in dented parts of surface embossing.
from TOLI In semi-exterior applications that are frequently exposed to direct sunlight or water, do not apply wax.
Please bear in mind that surface embossing cannot always match on the joints.
When you install NS Sheet for outdoor or semi-outdoor use, it might not fully perform without prescribed inclination.
When you finish the edge with TOLI NS Seal at the a temperature in summer, the bubble might be caused on the joints. You can avoid that by decreas-
ing Liquid B of NS Seal by 50 to 75%. In that case please do not walk on the floor for 24hours after installation because it will take time to be hardened.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are more likely
Others to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
If you install 3 different widths (1820mm/1620mm/1320mm) of the same color together in the same area, the colors might not
exactly match. This is because they cannot be in the same production dye lot.
MADE IN JAPAN
NS884
Specialty
Flooring
▲ NS896 ▲ NS816/NS811
NS813 (1820mm)
NS160813 (1620mm)
NS130813 (1320mm)
Packing 20m/roll
Net Weight 108.2kg/roll
Recommended entrances/porches/corridors/balconies in the apartment
Applications
dried mortar and concrete Eco Royal Cement, Eco AR600
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Recommended waterproof sub-floor with Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI urethane coated
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
TOLI NS UNDERLAY SHEET US Cement
Welding rod for heat-welding is available on a color-by-color basis.
Welding Edges should be finished with sealing materials such as TOLI NS Seal/TOLI NS Seal II.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
Where you can expect the floor will get wet (e.g. open corridor, balcony, and so forth), NS REAL DESIGN should be installed in accordance with
the method for humid mortar and concrete. Heat-weld the joints, and also finish the edges with the sealer such as TOLI NS Seal/TOLI NS Seal II.
Notes on Installation When you need the shock-absorbing performance for indoor use, the underlayment TOLI UNDERLAY SHEET (page 310) is workable. Apply the
Specialty
When you need the noise reduction performance to downstairs for indoor or semi-outdoor use, TOLI NS UNDERLAY SHEET (page 363) is work-
able. For the edges, please use TOLI NS Seal II.
Recommended New FB Wax, U Wax, and T Wax (Non-shiny and Antibacterial) are recommendable. Please apply the wax uniformly and thinly so that it
Maintenance Wax will not be pooled in dented parts of surface embossing.
from TOLI In semi-outdoor places exposed to direct sunlight or water, clean the floor with wet-mopping and do not apply the wax.
NS REAL DESIGN is a vinyl sheet for indoor or semi-outdoor use. Please avoid the installation in outdoors where the floor is exposed to direct
sunlight for a very long time.
Please bear in mind that surface embossing cannot always match on the joints.
When you install NS Sheet for outdoor or semi-outdoor use, it might not fully perform without prescribed inclination.
When you finish the edge with TOLI NS Seal at the a temperature in summer, the bubble might be caused on the joints. You can avoid that by decreasing
Others Liquid B of NS Seal by 50 to 75%. In that case please do not walk on the floor for 24hours after installation because it will take time to be hardened.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are more likely to stick
with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
NS4051
NS4051 NS4021
▲ NS4051
Packing 20m/roll
Net Weight 72.0kg/roll
Recommended entrances/porches/corridors/balconies in the apartment
Applications
dried mortar and concrete Eco Royal Cement, Eco AR600
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Recommended waterproof sub-floor with Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI urethane coated
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
TOLI NS UNDERLAY SHEET US Cement
Welding rod for heat-welding is available on a color-by-color basis.
Welding Edges should be finished with sealing materials such as TOLI NS Seal/TOLI NS Seal II.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
Where you can expect the floor will get wet (e.g. open corridor, balcony, and so forth), NS REAL DESIGN should be installed in accordance with
the method for humid mortar and concrete. Heat-weld the joints, and also finish the edges with the sealer such as TOLI NS Seal/TOLI NS Seal II.
Notes on Installation When you need the shock-absorbing performance for indoor use, the underlayment TOLI UNDERLAY SHEET (page 310) is workable. Apply the
same adhesive for both upside and downside of the underlayment.
Specialty
Flooring
When you need the noise reduction performance to downstairs for indoor use, TOLI NS UNDERLAY SHEET (page 363) is workable. For the
edges, please use TOLI NS Seal II.
Recommended New FB Wax, U Wax, and T Wax (Non-shiny and Antibacterial) are recommendable. Please apply the wax uniformly and thinly so that it
Maintenance Wax will not be pooled in dented parts of surface embossing.
from TOLI In semi-outdoor places exposed to direct sunlight or water, clean the floor with wet-mopping and do not apply the wax.
NS REAL DESIGN is a vinyl sheet for indoor or semi-outdoor use. Please avoid the installation in outdoors where the floor is exposed to direct
sunlight for a very long time.
Please bear in mind that surface embossing cannot always match on the joints.
When you install NS Sheet for outdoor or semi-outdoor use, it might not fully perform without prescribed inclination.
When you finish the edge with TOLI NS Seal at the a temperature in summer, the bubble might be caused on the joints. You can avoid that by decreasing
Others Liquid B of NS Seal by 50 to 75%. In that case please do not walk on the floor for 24hours after installation because it will take time to be hardened.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are more likely to stick
with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
◆ Slip Resistance
<in accordance with JIS A 1454 (OY-PULL method), rubber shoes>
C.S.R. value
dry wet and dusty
2.0mm vinyl sheet 0.84 0.46
NS REAL DESIGN (porcelain) 0.74 0.49 NS4101
NS4101 NS4102
NS4103 NS4104
Packing 20m/roll
Net Weight 110.0kg/roll
Recommended corridors/balconies/roof balconies in the apartment
Applications
dried mortar and concrete Eco Royal Cement, Eco AR600
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Recommended waterproof sub-floor with
Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI urethane coated
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
TOLI NS UNDERLAY SHEET US Cement
Welding rod for heat-welding is available on a color-by-color basis.
Welding Edges should be finished with sealing materials such as TOLI NS Seal/TOLI NS Seal II.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
Where you can expect the floor will get wet (e.g. open corridor, balcony, and so forth), NS9500 NEW TOUGH SHINE should be installed in
accordance with the method for humid mortar and concrete. Heat-weld the joints, and also finish the edges with the sealer such as TOLI NS
Seal/TOLI NS Seal II.
Specialty
Notes on Installation
Flooring
When you need the shock-absorbing performance for indoor use, the underlayment TOLI UNDERLAY SHEET (page 310) is workable. Apply the
same adhesive for both upside and downside of the underlayment.
When you need the noise reduction performance to downstairs, TOLI NS UNDERLAY SHEET (page 363) is workable. For the edges, please use
TOLI NS Seal II.
Recommended New FB Wax, U Wax, and T Wax (Non-shiny and Antibacterial) are recommendable. Please apply the wax uniformly and thinly so that it
Maintenance Wax will not be pooled in dented parts of surface embossing.
from TOLI In semi-outdoor places exposed to direct sunlight or water, clean the floor with wet-mopping and do not apply the wax.
Please bear in mind that surface embossing cannot always match on the joints.
When you finish the edge with TOLI NS Seal at a high temperature in summer, the bubble might be caused on the joints. You can avoid that
by decreasing Liquid B of NS Seal by 50 to 75%. In that case please do not walk on the floor for 24hours after installation because it will
take time to be hardened.
Others The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are more likely to
stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
◆ Slip Resistance
<in accordance with JIS A 1454 (OY-PULL method), rubber shoes>
C.S.R. value
dry wet and dusty
2.0mm vinyl sheet 0.84 0.46
NS9500 NEW TOUGH SHINE 0.77 0.57
NS9501
minutes
Packing 18m/roll
Net Weight 97.2kg/roll
Recommended slopes / corridors in school
Applications
dried mortar and concrete Eco Royal Cement, Eco AR600
Recommended humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Adhesive from TOLI
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Welding Welding rod for heat-welding is available on a color-by-color basis.
Seams should be heat-welded.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing
Notes on Installation should be avoided.
In indoor applications, TOLI UNDERLAY SHEET (page 310) is also workable as the sub-floor. Please use the same adhesive
for both upside and downside of UNDERLAY SHEET. In exterior or semi-exterior applications, do not use UNDERLAY SHEET.
Specialty
Flooring
Recommended New FB Wax, U Wax, T Wax (Non-shiny & Antibacterial)
Maintenance Wax
from TOLI Please apply the wax uniformly and thinly so that it will not be pooled in the dented part of surface embossing.
FLOORLEUM PLAIN EMBOSS is for indoor use. Do not install in exterior or semi-exterior places that are exposed to direct
sunlight for a long time.
Please bear in mind that surface embossing cannot always match on the joints.
Others The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
NS2302
NS2331 NS2341
NS2302 NS2337
◆ Slip Resistance
<in accordance with JIS A 1454 (OY-PULL method), rubber shoes>
C.S.R. value
dry wet and dusty
2.0mm vinyl sheet 0.84 0.46
FLOORLEUM PLAIN EMBOSS 0.71 0.50
NS2333 NS2349
Packing 20m/roll
Net Weight 128.0kg/roll
Recommended poolside, roof balconies
Applications
dried mortar and concrete Eco AR600
humid mortar and concrete Epo Gray ST, US Cement
Recommended waterproof sub-floor with Epo Gray ST, US Cement
Adhesive from TOLI urethane coated
TOLI UNDERLAY SHEET US Cement
TOLI NS UNDERLAY SHEET US Cement
Welding rod for heat-welding is available on a color-by-color basis.
Welding Edges should be finished with sealing materials such as TOLI NS Seal/TOLI NS Seal II.
Seams should be heat-welded.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
In indoor applications, TOLI UNDERLAY SHEET is also workable as the sub-floor. Please use the same adhesive for both top and bot-
Notes on Installation tom of UNDERLAY SHEET. In exterior or semi-exterior applications, do not use TOLI UNDERLAY SHEET (page 310) .
Specialty
Where you can expect the floor will get wet, NS550 GARDENT should be installed in accordance with the method for humid mortar
Flooring
and concrete. Also edges should be finished with NS Seal/NS Seal II.
When you need the noise reduction performance to downstairs, TOLI NS UNDERLAY SHEET (page 363) is also workable. For edges,
please use TOLI NS Seal II.
Recommended
Way of Maintenance For maintenance, just mop with water.
from TOLI
NS 550 GARDENT is finished with special treatment for the use at the poolside. Because of this, in case you install this product in
secluded rooms with no ventilation, you might feel abnormal odor. However, it is not harmful to human bodies.
Please bear in mind that surface embossing cannot always match on the joints.
When you install NS Sheet for outdoor or semi-outdoor use, it might not fully perform without prescribed inclination.
When you finish the edge with TOLI NS Seal at the a temperature in summer, the bubble might be caused on the joints. You can avoid that by decreasing
Others Liquid B of NS Seal by 50 to 75%. In that case please do not walk on the floor for 24hours after installation because it will take time to be hardened.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are more
likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
NS551
NS560 NS559
Specialty
Flooring
Sodium Hydroxide 5%
36 40 44 48 52 56 60 64 68
ⵈđⵉ
■Comparative test on heat insulation
The product without heat-insulating property
80
Surface temperature(đ)
60
50 NNS550
heat-insulating GARDENT
40
20
0・ ・ ・ ・ ・ ・ ・
0 10 20 30 40 50 60
Time (minutes)
<Test method>
After keeping the floor covering under certain temperature (27.5đ•40%RH)
for 1 day, expose it to the light (height of light: 18cm) of a 200W Downlight
and respectively measure the surface temperature using a thermal tracer
before and after the exposure. ▲ NS551/NS555
Packing 20m/roll
Net Weight 84.0kg/roll
dried mortar and concrete Eco Royal Cement, Eco AR600
heavy traffic use Epo Gray S, US Cement
Recommended The wards and living rooms where
Adhesive from TOLI Epo Gray ST, US Cement, US Cement (less-smelly)
beds with double-row casters are used
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly)
TOLI UNDERLAY SHEET US Cement, US Cement (less-smelly), US200
Welding Welding rod for heat-welding (antibacterial finished) is available on a color-by-color basis.
Seams should be heat-welded.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
The surface of NS FLATY is rather solid because aluminum oxide is contained. Therefore, when you use the cutter knife,
please replace the edge frequently to avoid the abrasion.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
Specialty
Flooring
Notes on Installation TOLI UNDERLAY SHEET (page 310) is also workable as the sub-floor. Please use the same adhesive for both top and bottom of
UNDERLAY SHEET. Please note that the durability to dynamic load will be degraded when you install with the underlayment.
Please do not use the urethane adhesive other than US Cement, US Cement (less-smelly). (except using TOLI UNDERLAY SHEET)
When you install NS FLATY in the places where rollaway beds are used (e.g. a patient room of the hospital, a living room of
the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and urethane adhesive
such as US Cement, US Cement (less-smelly) should be used even if the humidity of the sub-floor is less than 8%.
Recommended
Maintenance Wax T Wax (Non-shiny & Antibacterial), “HEALTH CARE COAT” from C×S Corporation (Shiny & Antibacterial)
from TOLI
NS FLATY is for indoor use. Do not install in exterior or semi-exterior places that are exposed to direct sunlight for a long time.
The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
Others Please note that the product has the indigenous odor from its materials.
When you apply the finish coating on the top, antibacterial wax should be chosen. Otherwise you cannot expect antibacterial perfor-
mance. Also please bear in mind that if you apply the finish coating too much, non-slip effect on the surface might be deteriorated.
To maintain the clean surface, wax application is recommendable. However, please bear in mind that slip resistance effect
will be decreased by thicker wax coating.
MADE IN JAPAN
NS4501 NS4505
NS4501
NS4502 NS4506
NS4503 NS4507
Specialty
Flooring
NS4501
▲
Easy maintenance
As the surface is flat, it’s easy to clean.
■Stain Testing <maintenance performance in sweeping> ■Durability to rolling loads <in accordance with JIS A 1454>
NS FLATY NS FLATY
Time until the More than 180 minutes Less than 30 minutes
floor covering (1st stage test by wheels (2nd stage test by wheels
swells with 110mm Φ) with 46mm Φ)
before testing after testing after testing (close-up) 1st stage test: JIS A 1454: Caster Rilling Test (load per unit area: approx. 900N/cm2)
2nd stage test: Independent test by TOLI (load per unit area: approx. 2,700N/cm2)
<test method> Spread 5gram of fine-grained sand (5 to 74μm) on the surface of
300mm square vinyl sheet samples, and sweep with a broom 10
times to the same direction. Afterwards check how much of sand
■Shock absorption <in accordance with JIS A 6519>
is left. overall thickness measured value(G)
■Scuff mark testing <in accordance with JIS K 3920> Tatami 55.0mm 55
Antibacterial finish
Excellent non-slip effectby aluminum oxide and The top layer is antibacterial finished. After installation, when
2 different materials with different softness. the subsequent cure period is over, apply the antibacterial wax
(1) By putting the hard designed layer into the soft backing layer, NS FLATY is
not only comfortable to walk, but less slippery.
“HEALTH CARE COAT” from C×S Corporation.
(2) Aluminum oxide on the top layer can prevent you from slipping.
■Antibacterial Performance <in accordance with JIS Z 2801>
Staphylococcus
Escherichia Coli MRSA
Aureus
loading
NS FLATY More than 2 More than 2 More than 2
Conducted by BOKEN Quality Evaluation Institute
Packing 20m/roll
Net Weight 100.0kg/roll
Recommended
Applications dry kitchens
dried mortar and concrete Eco Royal Cement, Eco AR600
Recommended
Adhesive from TOLI heavy traffic use Epo Gray S
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly)
Welding rod for heat-welding (antibacterial finished) is available on a color-by-color basis. Seam sealer like TOLI Super Seam
Welding Liquid can work as well.
Edges should be finished with sealing materials such as TOLI NS Seal.
Seams should be heat-welded or finished with a seam sealing bond.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
Notes on Installation For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
Where you can expect the floor will get wet, NS4400 AQUATREAD should be installed in accordance with the method for
humid mortar and concrete. Heat-weld or seal the joints, and finish the edges with NS Seal.
Specialty
Flooring
Please do not use the urethane adhesive other than US Cement, US Cement (less-smelly).
Recommended
Maintenance Wax T Wax (Non-shiny & Antibacterial), “HEALTH CARE COAT” from C×S Corporation (Shiny & Antibacterial)
from TOLI
Custom Order If you ask for higher slip resistance, “NS4400HR” with a harder surface is also available. For more information, please contact TOLI sales rep.
NS4400 AQUA TREAD is for indoor use. Do not install in exterior or semi-exterior places that are exposed to direct sunlight for a long time.
In case you install in the areas where you will have oily stains or a lot of water, you might not be able to expect sufficient
slip-resistant performance.
When you finish the edge with TOLI NS Seal at the high temperature in summer, the bubble might be caused if it’s too humid.
Others The dirt and stains will be more visible on the floor covering with lighter plain colors, compared to dark colors. Also they are
more likely to stick with the deep-embossed surface than the flat surface.
Please be aware that some rubber casters might cause color-contamination.
When you apply the finish coating on the top, antibacterial wax should be chosen. Otherwise you cannot expect antibacterial performance.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
NS4401
◆ Water Drainage Performance ◆ Antibacterial Performance <in accordance with JIS Z 2801>
<Test method> In JIS testing criteria, when the value is more than 2.0, the product
has sufficient antibacterial property.
Sprinkle 200ml of water Staphy- Vibrio
Escherich- lococcus MRSA O157 parahae-
ia Coli Aureus molyticus
Dewater by a rubber blade
Specialty
Flooring
◆ Slip Resistance
<in accordance with JIS A 1454 (OY-PULL method), rubber shoes>
C.S.R. value
Residual Water 0.92g 0.49g
0.01g dry wet and dusty
2.0mm vinyl sheet 0.84 0.46
◆ Heat Resistance (Oil)
NS4400 AQUATREAD 0.72 0.53
<Test method>
Dip an absorbent cotton in salad oil at 185 degrees centigrade, lay it on the vinyl NS4400HR (custom product) 0.84 0.55
sheet, and check the surface.
NS4400 AQUATREAD
NS4400 AQUATREAD
NS4400 AQUA TREAD is not affected by either oil nor hot water.
Packing 9m/roll
Net Weight 40.2kg/roll
dried mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly)
Recommended heavy traffic use Epo Gray S
Adhesive from TOLI
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
Welding rod for heat-welding (antibacterial finished) is available on a color-by-color basis. Edges should be finished with sealing
Welding materials such as TOLI NS Seal.
JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Seams should be heat-welded or finished with a sealing bond.
TOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
Notes on Installation If you roll up DEODORANT NS TOWARE NW to the wall, please install with a sealing material.
The surface of DEODORANT NS TOWARE NW is rather solid because aluminum oxide is contained. Therefore, when you use the cutter
knife, please replace the edge frequently to avoid the abrasion.
Specialty
Flooring
Unless you clean the floor by wet type of maintenance, TOLI UNDERLAY SHEET (page 310) is workable as the sub-floor material. Apply the
same adhesive for both upside and downside of the underlayment.
Please do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
Recommended No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out
Way of Maintenance tightly. Use the neutral detergent for fixed contamination.
from TOLI Even if the wax is applied on the surface, it does not affect the quality of NW series.
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
DEODORANT NS TOWARE NW is for indoor use. Do not install in exterior or semi-exterior places that are exposed to direct sunlight for a long time.
Please be aware that some rubber casters might cause color-contamination.
When you install DEODORANT NS TOWARE NW in the bathrooms where you can expect soils and sands will be brought in from outside
or somewhere other than bathrooms, the maintenance wax may be required to keep a better appearance.
When you finish the edge with TOLI NS Seal at a high temperature in summer, the bubble might be caused on the joints. You can avoid
that by decreasing Liquid B of NS Seal by 50 to 75%. In that case please do not walk on the floor for 24hours after installation because
Others it will take time to be hardened.
After you clean the floor with a wet rag, in case you leave the floor in a wet condition for many hours, DEODORANT NS TOWARE NW might
be bleached by absorbing the water. That will also cause bacteria or bad smells. Please wipe with a dry mop and keep DEODORANT NS
TOWARE NW always in a dry condition.
The stain-resistance of welding rods is not better than that of DEODORANT NS TOWARE NW.
If you clean the floor by wet type of maintenance, do not use TOLI UNDERLAY SHEET (page 310) as the sub-floor material.
Please note that the product has the indigenous odor from its materials.
When you apply the wax on the surface, deodorant efficacy might be lowered.
MADE IN JAPAN
NS4801
Specialty
Flooring
NS4823 SAND NS4842 SLATE NS4814 OAK NS4836 WALNUT
NS4844 SLATE
<Test Method>
Put the absorbent cotton on the floor covering. Drip the urine and leave it for 3 days at 50 degrees Centigrade.
After repeating the same procedure 3 times, clean and dry the surface. Then check the color change.
HEAT RESISTANCE
Cigarette burn will not easily remain compared to other vinyl sheet products.
(The temperature of light of cigarettes is 500 to 700 degrees Centigrade. Therefore please bear in
mind that slight scorch may be caused on any kind of vinyl flooring.)
[Cigarette Burn Test]
DEODORANT NS TOWARE NW 0.2mm vinyl sheet
before testing after testing before testing after testing
<Test Method>
Trample out the cigarette on the floor covering. Visually check the appearance afterwards.
STAIN RESISTANCE
For the use in bathrooms, stain resistance is definitely required. DEODORANT NS TOWARE NW has
excellent resistance to various kinds of stains.
[Stain Resistance Test]
before testing
No Change No Change
<Test Method>
Put the absorbent cotton on each floor covering.
Drip 1ml of chemical and cover with clock glass, and then leave it for 24 hours. After cleaning and drying the
surface, visually check the appearance.
▲ NS4844
Packing 9m/roll
Net Weight 40.2kg/roll
dried mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly)
Recommended heavy traffic use Epo Gray S
Adhesive from TOLI
humid mortar and concrete Epo Gray ST, US Cement, US Cement (less-smelly), US200
FWelding rod for heat-welding (antibacterial finished) is available on a color-by-color basis. Edges should be finished with sealing
Welding materials such as TOLI NS Seal.
FJOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
FSeams should be heat-welded or finished with a sealing bond.
FTOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the floor (such
as heavy stuff or casters), the seam joints should not be finished with TOLI JOINT SHIELD.
FWhen you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.)
FFor one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
Notes on Installation FIf you roll up DEODORANT NS TOWARE NW to the wall, please install with a sealing material.
FThe surface of DEODORANT NS TOWARE NW is rather solid because aluminum oxide is contained. Therefore, when you use the cutter
knife, please replace the edge frequently to avoid the abrasion.
Specialty
Flooring
FUnless you clean the floor by wet type of maintenance, TOLI UNDERLAY SHEET (page 310) is workable as the sub-floor material. Apply the
same adhesive for both upside and downside of the underlayment.
FPlease do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200.
Recommended FNo need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out
Way of Maintenance tightly. Use the neutral detergent for fixed contamination.
from TOLI FEven if the wax is applied on the surface, it does not affect the quality of NW series.
FHigh speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
FDEODORANT NS TOWARE NW is for indoor use. Do not install in exterior or semi-exterior places that are exposed to direct sunlight for a long time.
FPlease be aware that some rubber casters might cause color-contamination.
FWhen you install DEODORANT NS TOWARE NW in the bathrooms where you can expect soils and sands will be brought in from outside
or somewhere other than bathrooms, the maintenance wax may be required to keep a better appearance.
FWhen you finish the edge with TOLI NS Seal at a high temperature in summer, the bubble might be caused on the joints. You can avoid
that by decreasing Liquid B of NS Seal by 50 to 75%. In that case please do not walk on the floor for 24hours after installation because
Others it will take time to be hardened.
FAfter you clean the floor with a wet rag, in case you leave the floor in a wet condition for many hours, DEODORANT NS TOWARE NW might
be bleached by absorbing the water. That will also cause bacteria or bad smells. Please wipe with a dry mop and keep DEODORANT NS
TOWARE NW always in a dry condition.
FThe stain-resistance of welding rods is not better than that of DEODORANT NS TOWARE NW.
FIf you clean the floor by wet type of maintenance, do not use TOLI UNDERLAY SHEET (page 310) as the sub-floor material.
FPlease note that the product has the indigenous odor from its materials.
FWhen you apply the wax on the surface, deodorant efficacy might be lowered.
MADE IN JAPAN
NS4851 NS4861
NS4852 NS4862
NS4853 NS4863
▲ NS4852
Packing 20m/roll
Net Weight 2.8kg/roll
Recommended corridors or balconies in the apartment
Applications
dried mortar and concrete US Cement, US Cement (less-smelly), US200
Recommended humid mortar and concrete US Cement
Adhesive from TOLI
waterproof sub-floor with US Cement
urethane coated
Please use the same adhesive for both top and bottom of NS UNDERLAY SHEET.
Where you can expect the floor will get wet (e.g. open corridor, balcony, and so forth), NS UNDERLAY SHEET should be
installed in accordance with the method for humid mortar and concrete.
The joints of NS UNDERLAY SHEET should not be matched to the joints of floor covering above.
Notes on Installation
The edges of NS UNDERLAY SHEET and floor covering should be finished with TOLI NS Seal II.
NS UNDERLAY SHEET should be installed in two-way alternate directions.
Please install the silver side up.
Specialty
Flooring
After you install NS UNDERLAY SHEET, cure the floor for more than 24 hours until you start to install the floor covering above.
If you lay heavy stuff such as furniture, you cannot avoid the residual indentation. In that situation, please lay another board
on the floor covering to break up the heavy load. Normally the load at a grounding point should be less than 1kg/cm2.
NS UNDERLAY SHEET cannot be installed on the stairs.
Others
Where you can expect casters or other rolling loads will frequently come and go, the wheel tracks could be outstanding. In
those places, please try to avoid using NS UNDERLAY SHEET.
Please note that the product has the indigenous odor from its materials.
MADE IN JAPAN
30
20
NS800
10
0 low
Sound Insulating
Performance
-10
125 250 500 1000 2000
Central Frequency (Hz)
■ Contact Information
TOLI Corporation - Global Department TOLI Corporation Singapore Branch
2-10-4 Higashi-Shinbashi Minato-ku Tokyo 1 Coleman Street #05-02 (Unit1),
105-0021 Japan The Adelphi, Singapore 179803
Phone: +81-3-5403-2078 Phone: +65-3138-5052
Fax: +81-3-5472-6307 Fax: +65-6491-5234
http: //toli - overseas.com/ http: //toli - overseas.com/
E-mail: toli_contact@toli.co.jp
TOLI Corporation - Global Department TOLI Corporation Singapore Branch
2-10-4 Higashi-Shinbashi Minato-ku Tokyo 1 Coleman Street #05-02 (Unit1),
105-0021 Japan The Adelphi, Singapore 179803
Phone: +81-3-5403-2078 Phone: +65-3138-5052
Fax: +81-3-5472-6307 Fax: +65-6491-5234
http: //toli - overseas.com/ http: //toli - overseas.com/
E-mail: toli_contact@toli.co.jp