Professional Documents
Culture Documents
64 V02 Ed 02 PDF
64 V02 Ed 02 PDF
FOR SAVFR 21
INFORMATION EXPRESS TECHNIQUE A
MACHINE: DKS S88
Date : 06/02/03. SAV IET N°64 V02 ed 02 Page : 1/2
SUMMARY/SOMMAIRE: Reccurent misframing on Canon scanner
Application on : Application mode/Modalité d’application :
Application sur : Immediately :immédiatement :
all machines If necessary /si nécessaire : Í
Periodically/périodiquement :
toutes les machines Next service call/lors d’un passage:
Problem:
Recurrent mis-framing on Canon scanner even after having cleaned the rollers and
set the rollers calibration as per Info Express N° 30 V02 ed 02.
Cause:
The rollers which are driving the film become too old.
Solution:
A/ Change the rollers and re-adjust everything as per Info Express N° 30 V02 ed 02:
To do so, bend a little bit the metallic plate holding the rear rollers.
See drawing and picture here after.
Make sure not to tight it too much and always try it by inserting the sleeve adaptor
(which is the thicker adaptor)
THESE INFORMATIONS ARE DESIGNED ONLY FOR TECHNICIANS AND ARE CONFIDENTIAL, AND NOT CONTRACTUAL.
CES INFORMATIONS SONT FAITES POUR DES TECHNICIENS ET SONT CONFIDENTIELLES ET NON CONTRACTUELLES.
TECHNICAL INFO EXPRESS Indice
FOR SAVFR 21
INFORMATION EXPRESS TECHNIQUE A
MACHINE: DKS S88
Date : 06/02/03. SAV IET N°64 V02 ed 02 Page : 2/2
Mettalic plate
THESE INFORMATIONS ARE DESIGNED ONLY FOR TECHNICIANS AND ARE CONFIDENTIAL, AND NOT CONTRACTUAL.
CES INFORMATIONS SONT FAITES POUR DES TECHNICIENS ET SONT CONFIDENTIELLES ET NON CONTRACTUELLES.