Professional Documents
Culture Documents
d3 k
Metric
d4 m
h
e
l
d1 d2
45°
F1 F2 45°
F3
Axial load bearing Load bearing Lateral load bearing Do not use
capacity capacity at max. 45° capacity at max. 45° under
per eye nut per eye nut per eye nut shear tension
Metric table
1 Dimensions in: millimeters - inches
d1 d2 d3 d4 e h k Length l m F1 max. F 2 max. F 3 max.
Steel ST Stainless Stainless
steel AISI 304 steel AISI 316
M 8 M 8 - 20 36 20 6 36 8 13 10 1400 N 1000 N 700 N
0.79 1.42 0.79 0.24 1.42 0.31 0.51 0.39 315 lbf 225 lbf 157 lbf
M 10 M 10 M 10 25 45 25 8 45 10 17 12 2300 N 1700 N 1150 N
0.98 1.77 0.98 0.31 1.77 0.39 0.67 0.47 517 lbf 382 lbf 259 lbf
M 12 M 12 M 12 30 54 30 10 53 12 20.5 14 3400 N 2400 N 1700 N
1.18 2.13 1.18 0.39 2.09 0.47 0.81 0.55 764 lbf 540 lbf 382 lbf
M 16 M 16 M 16 35 63 35 12 62 14 27 16 7000 N 5000 N 3500 N
1.38 2.48 1.38 0.47 2.44 0.55 1.06 0.63 1574 lbf 1124 lbf 787 lbf
M 20 M 20 M 20 40 72 40 14 71 16 30 19 12000 N 8600 N 6000 N
1.57 2.83 1.57 0.55 2.80 0.63 1.18 0.75 2698 lbf 1933 lbf 1349 lbf
M 24 M 24 M 24 50 90 50 18 90 20 36 24 18000 N 12900 N 9000 N
1.97 3.54 1.97 0.71 3.54 0.79 1.42 0.94 4047 lbf 2900 lbf 2023 lbf
M 30 - - 65 108 60 22 109 24 45 28 32000 N 23000 N 16000 N
2.56 4.25 2.36 0.87 4.29 0.94 1.77 1.10 7194 lbf 5171 lbf 3597 lbf
M 36 - - 75 126 70 26 128 28 54 32 46000 N 33000 N 23000 N
2.95 4.96 2.76 1.02 5.04 1.10 2.13 1.26 10341 lbf 7419 lbf 5171 lbf
Specification 2 Information
• Steel C15E ST The following guidelines for DIN 580 lifting eye bolts must be observed in addition to the maximum load
-- Drop-forged values given in the table:
-- Annealed The eye bolt must be of fully screwed in, achieving complete contact between the two mating faces.
-- Contact face machined
The counter thread must be of an equal length and the base material of an equal strength to that of
-- Zinc plated, blue passivated finish
the bolt.
• Stainless steel AISI 304 NI
The operating instruction contains further guidelines and is included with every eye bolt (see also
-- Drop-forged
at www.jwwinco.com/service).
-- Contact face machined
• Stainless steel AISI 316 A4 see also...
-- Drop-forged • Safety Swivel Lifting Eye Bolts GN 581
-- Contact face machined • Safety Swivel Lifting Eye Bolts GN 581.5
• RoHS compliant • Bow Shackles GN 585
• D-Shackles GN 584
2 | 3.4 Installing, Lifting, Damping with Leveling Feet, Lifting Gear and Rubber Elements www.jwwinco.com | phone: 1-800-877-8351