Professional Documents
Culture Documents
valid from :
LAPP KABEL BUS L2/FIP 1x2x0.64 SWA 30.10.2008
Application
LAPP KABEL BUS L2/FIP is a data cable for the SIEMENS field-net Sinec L2 DP (to DIN 19245 part 3 and EN
50170), for field bus system F.I.P ( Factory Instrumentation Protocol) as well as for high performance data
networks with 150 Ohms nominal impedance. The cable is designed for the system-defined transmission
rates of 1.5 Mbit/s, 2.5 Mbit/s and 12 Mbit/s. The transmission characteristics conform to the system and
guarantee a high operating security during data transmission. It is suitable for interfaces RS 422 and RS 485.
Due to its double screening it is suitable for installation in electromagnetically demanding areas. The
additional galvanized steel wire armouring on the cable makes it suitable for direct burial applications and
permanent installation in dry and damp interiors.
Design
Armouring G.I Wire 6615, wire diameter 0.9 mm Ø, approx. 90% coverage
elaborated by:
PMG-LIPL Document: version 1 DS382300062_1.1EN page 1 of 2
LAPP INDIA PVT. LTD., Plot no.98, J&K, Jigani Industrial Area, II Phase, Bangalore South-560105.
Ph: (08110)414800-03, Fax(080) 27825479, www.lappindia.com
DATA SHEET 382300062
valid from :
LAPP KABEL BUS L2/FIP 1x2x0.64 SWA 30.10.2008
Peak operation voltage ( not for purpose of power/high voltage current) V 250
elaborated by:
PMG-LIPL Document: version 1 DS382300062_1.1EN page 2 of 2
LAPP INDIA PVT. LTD., Plot no.98, J&K, Jigani Industrial Area, II Phase, Bangalore South-560105.
Ph: (08110)414800-03, Fax(080) 27825479, www.lappindia.com