You are on page 1of 1

Technical description

Item 1

1 Demag wheel block


DRS-112-A30-A-47-K-H-A10

The Demag wheel block is a travel wheel in a box housing which can be used for universal applications in all
industries, for almost all types of movements as well as for supporting, driving and guiding. Due to the modular
principle, the amount of project engineering work, design and manufacture of travel units is reduced to a minimum.
The excellent form and position tolerances between the travel wheel and the housing facilitate assembly and reduce
installation and alignment work. The split block housing allows replacing the travel wheel without disassembly of the
wheel block in the case of top connection. Due to the perfectly matching components – from the wheel block over the
gearbox up to the motor – complete transfer units can be built up very easily.

The wheel block is designed according to our publication 203 352 44, which we will send to you upon request.

Technical data:
Driven wheel block A
Hub profile acc. DIN 5480 N 30
Travel wheel diameter 112 mm
Travel wheel width 80 mm
Travel wheel tread: 47,0 mm
Travel wheel contour with flanges on both sides
Travel wheel material: EN-GJS-700-2 spheroidal graphite cast iron
Net weight appr. 7,4 kg

Equipment:
Gearbox size A10
Wheel block prepared for top connection
Wheel block prepared for horizontal guide roller arrangement
Wheel block prepared for torque bracket fitting

Pay attention to the temperature limits of the wheel block/drive.

Painting:
RAL 7001, silver grey

Documentation:
Installation guide
EU document according to the Machinery Directive

You might also like