Professional Documents
Culture Documents
Revised 07-99
M2582 M2582
10.0
]
]
g.)
bar]
]
[254.0]
bar
bar
bar
.28 k
38
.69
0.34
.07
9.0
[1.
g.)
[228.6]
) [0
) [2
z. (0
a) [
11 k
Inches water column (∆p) drop across valve.
)
kPa
kPa
kPa
8.0
10 o
4 kP
Optional
. (0.
[203.2]
Millimeters water column in brackets [ ].
38
07
(69
Resistor
ig (3
g (1
g (2
4 oz
7.0 (See Note)
sig
[177.8]
psi
psi
5 ps
10 p
White
20
30
6.0
[152.4]
Black
5.0
[127.0]
4.0 Ground
[101.6] Red
3.0
[76.2]
2.0
[50.8]
1.0
[25.4]
NOTE: For grounding the ignition (CD models only) through the fuel
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000
valve’s internal snap-switch, a Murphy Magnetic Switch adapter (see page 4)
[7.08] [14.16] [21.24] [28.32] [35.40] [42.48] [4956] [56.64] [63.72] [70.80] [77.88] [84.96]
must be used in addition to a 100 ohm, 2 watt resistor (supplied with valve).
Standard cubic feet per hour. Cubic meters per hour in brackets [ ].
3.0
4o
.)
2.0
]
[50.8] bar
a ) [.69
kP
(69 bar]
sig [1.38
1.0 10 p 38 kPa) 10 9 8 7 6 5 4 3 2 1 10 9 8 7 6 5 4 3 2 1
1 ]
sig ( 7 bar
[25.4]
20 p ) [2.0
(2 0 7 kPa
ig
30 ps Jumper Jumper Optional
Resistor
(See Note)
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000
[14.16] [28.32] [42.48] [56.64] [70.80] [84.96] [99.12] [113.28] [127.44] [141.60] NOTE: For grounding the ignition (CD models only) through the fuel
valve’s internal snap-switch, a Murphy Magnetic Switch adapter (see page 4)
Standard cubic feet per hour. Cubic meters per hour in brackets [ ].
must be used in addition to a 100 ohm, 2 watt resistor (supplied with valve).
MV-94134B page 2 of 4
Dimensions
1 NPT 45°
(2 places)
7-5/16 in.
1/4 NPT (186 mm)
Vent and
Plug 3/4 in. (19 mm) dia.
3-3/32 in. (4 places) each end
(79 mm) 2 in. (51 mm) dia.
equally spaced on a
2 places 150# RF
14-25/64 to 14-29/64 in. 4-3/4 in. (121 mm)
5-1/2 in. (140 mm) (raised face) pipe flange
(366/367 mm) b.c. (bolt circle)
Manual Disconnect
knob trips valve Latching Handle 1/2 NPT Conduit
(M5081 only) latches valve open Connection (2 plcs.)
1-3/8 in. (35 mm)
1/2 NPT
Conduit 10-5/16 in.
(262 mm)
Inlet
Breather
3-7/16 in.
Valve (87 mm)
Open/Close
Indicator
Button
4-1/16 in.
2 NPT (103 mm)
Vent and Plug (2 places)
1/2 NPT
3 in. (76 mm)
9-3/8 in. (238 mm) 7-3/4 in. (197 mm)
MV-94134B page 3 of 4
How to Order
To order your valve, use the diagram below to specify your model and options. Accessories
Example: M5081-A-2 Specify part number when ordering.
Magnetic Switch Adapter
_____ – __ – __
Base Models 65020126: For Negative Ground CD Ignitions
M2582 up to 240 VDC
M5081 Body Material 65020127: For Positive Ground
M5081FS Blank = Aluminum CD Ignitions up to 450 VDC
2 = Steel (M5081 and M5081FS only)
65020155: For Negative Ground
3 = Steel body with steel flange mounting
(M5081 and M5081FS only) CD Ignitions 240 VDC to 450 VDC
Trip Coil
A = Magneto ignition
Diode Package
B = Battery 65010065: For use with dual
C = CD ignition Magneto Ignition systems.
Coil for M5081FS model only
A = 12 VDC
B = 24 VDC
MV-94134B page 4 of 4