Professional Documents
Culture Documents
Individual
solutions for
Krantz Multifunction Exposed Ceiling – System of many talents
technical building
Single
services
2
Content
Common rooms
Meeting rooms
3
Acoustic Panels
solution that
is versatile
4
1
1
2
Back to basics
The Acoustic Panel is a modern architectural Acoustic Panel
alternative for the open ceiling design. By com-
Ceiling panel Sheet metal s = max. 0.8 mm, perforated, hole Ø 2.5 mm,
bining them with Krantz system components
approx. 16 % open area, powder coated
that have been specifically developed for this
type of installation, multifunction exposed ceil- Acoustic lining Back covered in acoustic lining
ing units are able to provide the highest level of Fastening crossbar 2.0 mm sheet metal
thermal comfort.
Standard nominal length L A single or multiple panels 1 500 mm – 5 500 mm1)
Standard nominal width B 1 150 mm1)
Key
Nominal height H 50 mm1)
1 Crossbar for the suspension of
acoustic panels Minimum suspension height hmin 150 mm
2 Perforated acoustic panels
Weight approx. 8 kg/m2 panel area
3 Canted design optional
Total weight Dependent on the ceiling design, services, etc.
Acoustic panels
5
Multifunction
Exposed Ceil-
ing as Radia- Cooling Heating
Air Distri-
bution
Sound
Absorption
Combinable
with air outlets
6
5
1
1
4
4
3
Multifunction Exposed Ceiling as Multifunction Exposed Ceiling as Radiation Cooling and Heating Panels
Radiation Cooling and Heating Panels
Example setup
7
Multifunction
Exposed Ceiling
AVACS Cooling Heating
Air Distri-
bution
Sound
Absorption
Supply Air
The Krantz
solution that
does much more
8
4
6
1
1
5
5
7 3
7
7 2
Multifunction Exposed Ceiling AVACS Multifunction Exposed Ceiling AVACS Supply Air
Supply Air
Example setup
9
Multifunction
Exposed Ceiling
AVACS Cooling Heating
Air Distri-
bution
Sound
Absorption
Recirculated Air
10
4
6
1
1
5
5
3
Multifunction Exposed Ceiling AVACS Multifunction Exposed Ceiling AVACS Recirculated Air
Recirculated Air
Example setup
Delights designers
The Multifunction Exposed Ceiling AVACS Multifunction Exposed Ceiling AVACS Recirculated Air
Recirculated Air is a variation on our AVACS
Ceiling panel Sheet metal s = max. 0.8 mm, perforated, hole Ø 2.5 mm,
Supply Air system. Our proven cooling ceiling
approx. 16 % open area, powder coated
technology is combined with an AVACS recircu-
lated air fan, invisible to the user. The view from Serpentine pipework Copper tube 12 x 0.4 mm1)
below the multifunction exposed ceiling AVACS Contact profile Aluminium profile, width b = 78 mm1)
consists of one or more perforated metal ceiling length matching that of the serpentine pipework
panels which are suspended on hidden fasten-
ing crossbars from the building itself. The result Fastening crossbar Sheet metal 2.0 mm
is a visually-appealing panel that provides spe- Connection ends For push-in fittings Ø 12 mm +0.05/-0.10 mm1)
cific cooling and heating outputs while at the
same time maintaining a high degree of thermal Pipe spacing T Fittings:
comfort. 90° bend, inclined at approx. 20-90° to the ceiling plane1)
180° bend, inclined at approx. 20-90° to the ceiling plane1)
Standard nominal length L 1 500 mm - 5 500 mm 1)
Standard nominal width B 1 150 mm 1)
Key 2)
1 Crossbar for panel suspension Nominal height H 50 mm 1)
2 Chilled water supply pipe Minimum suspension height hmin 150 mm
3 Chilled water return pipe
4 Recirculated air fan Allowable operating pressure 6 bar1) (up to 16 bar possible)
5 Contact-cooling element Weight approx. 10 kg/m2 panel area (including water, depending
6 Perforated ceiling panels on the pipe spacing) plus 1.1 kg recirculated air fan
Total weight Dependent on the ceiling design, services, etc.
1) Other types/values on demand, 2) Sound absorbers (optional)
11
Multifunction
Exposed Ceiling
with Opticlean Cooling Heating
Air Distri-
bution
Sound
Absorption
The Krantz
solution that’s
nearly invisible
Cooling output
— Cooling
— output is dependent on the
primary air quantity and on possible
low temperature∆tL
Heating output
— Heating
— output is dependent on the
primary air quantity and on possible
low temperature∆tL
12
4
6 1
1
5
5
3
Multifunction Exposed Ceiling with Opticlean Multifunction Exposed Ceiling with Opticlean
Example setup
13
Multifunction
Exposed Ceiling
with Opticlean Cooling Heating
Air Distri-
bution
Sound
Absorption
14
2
4 1
1
3
Multifunction Exposed Ceiling The above example shows the fan coil at the installation point.
with Opticlean and Fan Coil Having the fan coil outside of the Multifunction Exposed Ceiling is also possible.
Example setup
15
Multifunction
Exposed Ceiling
KrantzCool Cooling Heating
Air Distri-
bution
Sound
Absorption
The Krantz
solution that
adapts to the
right situation
16
5
7 2
4
1
3
6
2
17
Multifunction
Exposed Ceiling in
the optimum light Cooling Heating
Air Distri-
bution
Sound
Absorption
——
18
... whether with suspended linear lamps for direct or indirect lighting, or
... with built-in lamps for direct lighting, or … with floor lamps for direct and indirect lighting, etc.
19
Krantz GmbH
Uersfeld 24, 52072 Aachen, Germany
Phone: +49 241 441-1
Fax: +49 241 441-555
info@krantz.de | www.krantz.de