- Kimitech PLUG VR is a pre-formed "L" shaped glass fiber connector with resin coating that improves adhesion for reinforcement systems.
- It has excellent mechanical properties and durability in aggressive environments. It is installed by drilling holes and inserting the connector into wet structural mortar.
- The connector has a resistant area of 11.5 mm2 and average tensile strength of 18.9 KN to reinforce masonry, arches, and vaults for seismic adaptation and restoration.
- Kimitech PLUG VR is a pre-formed "L" shaped glass fiber connector with resin coating that improves adhesion for reinforcement systems.
- It has excellent mechanical properties and durability in aggressive environments. It is installed by drilling holes and inserting the connector into wet structural mortar.
- The connector has a resistant area of 11.5 mm2 and average tensile strength of 18.9 KN to reinforce masonry, arches, and vaults for seismic adaptation and restoration.
- Kimitech PLUG VR is a pre-formed "L" shaped glass fiber connector with resin coating that improves adhesion for reinforcement systems.
- It has excellent mechanical properties and durability in aggressive environments. It is installed by drilling holes and inserting the connector into wet structural mortar.
- The connector has a resistant area of 11.5 mm2 and average tensile strength of 18.9 KN to reinforce masonry, arches, and vaults for seismic adaptation and restoration.
DESCRIPTION After carefully preparation of the substrate, before applying
Kimitech PLUG VR is a pre-formed “L” shaped connector the first layer of lime-based structural mortar, wet with with improved adhesion, part of the CRM reinforcement water at low pressure until saturated; the non-saturation system in combination with Kimitech WALLMESH mesh, could cause the non-adhesion and cracking of the mortar. according to the approach defined in the guidelines on the Apply by trowel or spatula in stainless steel or with a qualification of CRM (Composite Reinforced Mortar) plastering machine a first layer of structural mortar for a systems that confirm the need to qualify the whole thickness of about 1.5 cm, leaving the surface sufficiently reinforcement package. rough to allow adhesion of the next layer. Place the sizeable alkaline fiberglass mesh from Kimitech CHARACTERISTICS AND ADVANTAGES WALLMESH range on the still fresh mortar. • Performing: excellent mechanical characteristics, Drill with a suitable diameter of at least 4 per m 2. Insert durability even in aggressive environments (it is Kimitech PLUG VR connector and fill the hole with stainless) and resistance to atmospheric agents; it Kimitech EPOXY CTR epoxy resin. Apply a second layer can be used with lime and/or cement based of mortar to a thickness of about 1.5 cm. mortars. • Easy to apply: quick installation PACKAGING • Compatibility: perfect compatibility with any Box 100 pcs. matrix used for grouting, suitable for interventions on buildings of historical and cultural interest. Characteristics Kimitech PLUG VR Material Glass fibre with resin USES Resistant area 11,5 mm² Suitable for structural reinforcement of masonry, arches Average tensile srength 18,9 KN and vaults. Suitable for seismic adaptation, securing and Glass and resin elastic modulus restoration of structures > 80 GPa
Glass transition temperature > 100°C
APPLICATION Make sure that the substrate is completely hardened, Elongation at failure 3,2 % resistant and free of loose parts that come off. Diametre 8 mm In the presence of degraded existing plaster, smooth the L 10x20 cm surface until a substrate with sufficient strength. Cleaning L 10x30 cm and saturation of the substrate by low pressure washing. Types L 10x50 cm Remove any efflorescence and salts by washing or L 10x70 cm mechanical systems such as brushing, sandblasting or Improve adhesion (aggregate diametre) 0,3-0,8 mm water sandblasting. On particularly irregular or poorly absorbent substrates, apply a coat of rough coat before applying the structural WARNING mortar. Product for professional use. The substrate temperature must be between + 5°C and + The marking obligations are not related to the intrinsic 30°C. Do not apply mortars on frozen substrates. nature of a given product, but to the use to which a specific material is intended: before making the order in Kimia, the buyer shall submit all the documentation available to the works supervision in order to determine the materials suitability (in terms of certifications and performance) in relation to the use for which they are intended.
The technical specifications and application methods
recommended herein are based on our current knowledge and experience and do not represent any form of guarantee of the final results obtainable with the product. It is the customer's responsibility to check that this data sheet is still effective and has not been replaced with a more recent version.