Professional Documents
Culture Documents
DESCRIPTION
TECHNICAL PROPERTIES. W/P RATIO = 0.4:
Cemcoat Putty is a polymer modified cementitious skim
coat, smooth finishing and wall putty plaster specially Colour: White or grey
designed to be over painted by decorative paints in internal Fresh wet density: 1.6 ± 0.1 g/cm³
and external applications.
Application thickness: Up to 3 mm
Cemcoat Putty composed of unique composition of
cement, limestone, dry powders, selected polymers and Bond strength:
≥ 1 MPa @ 28 days
special hydrophobic additives which when mixed with ASTM D4541
water produces a creamy paste suitable for plastering and Compressive strength:
filling small cracks and pinholes on vertical and overhead ≥ 10 MPa @ 28 days
ASTM C109
surfaces in dry or humid conditions.
Flexural strength:
≥ 3 MPa @ 28 days
APPLICATIONS ASTM C348
Working time: 60 - 120 min
Cemcoat Putty is designed to withstand humid conditions
and moisture internally and externally when applied in Final setting time:
8 - 9 hr
different applications such as: ASTM C191
Substrate must be clean and free from oil, grease, dust REMARKS
and laitance.
» In cases where moisture is anticipated in the substrate,
PRIMING and to prevent the subsequent coat from peeling off
Cemcoat Putty, the subsequent coat should be a
Normally no primer is required for the application of breathable coating such as water based epoxy coatings
Cemcoat Putty. However, areas to be plastered should or emulsion paints.
be soaked with clean water before applying the plaster, » Although Cemcoat Putty is water resistant, it is not
except for gypsum and plaster boards. designed to prevent negative water pressure. In such
cases a cementitious waterproof coating such as
“Setseal B” should be applied before applying Cemcoat
Putty.
Cemcoat Putty
CLEANING MORE FROM DON CONSTRUCTION PRODUCTS
All tools should be cleaned immediately after use with A wide range of construction chemical products are
fresh clean water. Hardened materials should be cleaned manufactured by DCP which include:
mechanically.
» Concrete admixtures.
PACKAGING » Surface treatments
» Grouts and anchors.
Cemcoat Putty is available in 5, 20 and 25 kg bags. » Concrete repair.
» Flooring systems.
YIELD » Protective coatings.
» Sealants.
Approximately 17.5 litres per 20 kg bag, which is 17.5 m2 » Waterproofing.
per 20 kg bag @ 1 mm thickness. » Adhesives.
» Tile adhesives and grouts.
STORAGE » Building products.
» Structural strengthening.
Cemcoat Putty has a shelf life of 18 months from date of
manufacture if stored at temperatures between 5°C and
35°C in original unopened bags.
CAUTIONS
FIRE