Professional Documents
Culture Documents
CONNECTION
STANDARD EXECUTION
TYPE THERMOWELL BORE SIZE LENGTH PROCESS CONNECTION
bar stock AISI 316(L) 6.5 mm customer specific socket weld-in
PROCESS CONNECTIONS
size (Di)
3/4” 26.7
1” 33.4
1.5” 48.3
All dimensions in mm
OPTIONS
inside pressure test
stainless steel plug & chain
thermowells > 610 mm
wake frequency calculation per ASME PTC 19.3 TW-2010
page 1 of 3
III – DATA SHEET BDTW2X5 – SOCKET WELD-IN PROCESS
CONNECTION
page 2 of 3
Holland – United Kingdom – Romania – India – Thailand – Dubai
To our knowledge, the information contained herein is accurate as of the Badotherm reserves the right to make changes to the specifications and
date of this document. However neither Badotherm, nor its affiliates makes materials without prior notice. The latest version of the datasheet can be
any warranty, express or limited, or accepts any liability in connection with found on www.badotherm.com.
this information or its use. This information is for technical skilled persons at
their own discretion and risk and does not relate to the use of this product in © 2001 Badotherm, all rights reserved. Trademarks and/or other products
combination with any other product. The user alone finally determines referenced herein are either trademarks or registered trademarks of
suitability of any information or material in contemplated use, the manner of Badotherm.
use and whether any patents are infringed. This information gives typical
properties only. modified 31-10-2014 page 3 of 3