Professional Documents
Culture Documents
HW 2 Process Variables
HW 2 Process Variables
Questions
Flow rate
Molecular weight
Temperature
Pressure
C4H10
C3H8
3. The heat capacity of ammonia defined as the amount of hat required to raise
temperature of a unit mass ammonia by 1o at constant pressure is given by the
expression
4. A 2.0 M aqueous hydrochloric acid solution (ρ = 1.06 g/ml) flows through a 45-m
long pipe with a 6.0 cm diameter at a rate of 87 L/min.
o
C K o
F o
R
-273
212 672
7. a. Calculate the Pressure of the gas sample in kPa if the manometer indicates h =
36.3 cm water as shown in the Figure. The temperature is 25oC.