Professional Documents
Culture Documents
EPDM is a synthetic rubber that is an EPDM was introduced in the early marketplace and the product has
Elastomer. The mat
material
erial has unique sixties and has over the years found already proven its suitability as
suchelasticity
properties like as elasticity
andand these
these an increasing use as construction waterprooÞng over decades.
properties are unchanged when the material in the automotive industry,
membrane is at stress. EPDM is also a within building and civil engineer-
thermo-set material meaning that the ing.
material keeps its properties in a broad
temperature range and thatwill not melt
it cannot WaterprooÞng over decades
likemelted.
be plastics. Rubber is the geomembrane that
has been used the longest in the
• Superior durability and service life. • Excellent UV and ozone resistance • Proven over decades.
Independent study made by SKZ in – can be used exposed. Rubber membranes have been used
Germany shows that expected ser- The carbon black in EPDM is a natu- for over 50 years in geomembrane
vice life is exceeding 50 years. ral UV absorber. applications and have the longest
history of all waterprooÞng mem-
• Withstands movements from earth • Root resistant. branes.
settlements or temperature changes. Both the membrane and the seams
The membrane can be stretched to has been tested and approved for • Fully engineered system.
over 300% without changing the root penetration from vegetation. All seaming is done by heat welding
typical properties of the membrane.
with the patented Thermobond tech-
It is also superior when it comes to • High resistance to chemicals nology. The system incorporates a
multidimensional tension as the EPDM is cross linked and stable full range of waterprooÞng accesso-
material doesnÕt have any yield point. and donÕt react or emit anything ries including a weldable waterstop
when in contact with concrete or for compartmentalization.
• Endure almost unlimited loads and
other substances you normally Þnd
water pressure.
in ground applications.
Rubber has viscoelastic properties
which mean that the products
• Quick installations.
elasticity is predominant at low load
The membrane has low weight per
and that it becomes more viscous
sq. m. and is preferably installed in
with higher loads. The membrane and
big panels with few seams to be
the seams can resist a hydrostatic pres-
done during the installation.
sure exceeding 70 meter water head
(6.9 BAR).
2
Product range
Elastoseal EPDM Tanking membrane can either be supplied in roll form
or prefabricated according to drawing.
Thickness (mm) Width (m) Length (m) Weight (Kg/Sq.m.) Made to drawing (Sq.m.)
1.70 25 1.70
1.5 3.35 25 1.70 Specifed measurements min-max. 300-1000
5.00 25 1.70
Membrane SpeciÞcation
- of Elastoseal EPDM
The membrane complies with the standards: ASTM D6134, DIN 7864, EN 13956 and EN 13361.
3
Prefabrication of Elastoseal EPDM
- enabling quick and safe installations
The Thermobond seaming technique provides a fast, easy method for producing
thermally welded seams.
4
Installation
- of Elastoseal EPDM
2
4
3 5
5
Trelleborg
- Quality Assurance System (QAS)
Elastoseal EPDM Tanking System is a completely engineered system, where product, seams,
details, installation and site quality assurance guarantees a maximum of safety and perfor-
mance.
All seams are controlled and visual inspections for mechanical damages are done on
regular basis.
Installers are always trained and certiÞed by Trelleborg before they are allowed to make
installations.
Trelleborg
- Concern for the environment
EPDM membranes have minor negative inßuence on nature. The membrane is chemically
stable and does not contain any additives or plasticizers that will be emitted or released
during the service life, or when discarded or recycled. Long service life combined with
the low weight give an effective resource usage throughout the product life cycle.
EPDM membranes reclaimed from old installations can be burned for energy produc-
tion, placed on landÞlls or recycled for use in new EPDM products.
Applications
- of Elastoseal EPDM
6
Ethylene Propylene Dienmethylene
- EPDM Ð the chemistry in depth
EPDM is an amorphous elastomer chemical cross-links, giving an degradation due to oxidation. The
obtained by the copolymerization of elastic chemically stable product rubber compound also contains
ethylene, propylene and a non-con- with negligible aging despite expo- reinforcing carbon black, Þllers,
jugated diene with saturated carbon sure to UV-radiation, atmosphere, processing agents, antioxidants and
structures in main chain. chemicals, water, earth and extreme vulcanizing ingredients.
temperatures.
During production the EPDM
is vulcanized. The long rubber Because the EPDM remains satu-
molecules are joined together by rated after vulcanization it resists
References
- Installations with Elastoseal EPDM Tanking Systems
Al Fardan Twin Towers, Qatar, Hestra railway bridge, Sweden, Dubai International Airport, UAE, Rio
ImamTinto Operations
Khomeini Building,
Mosque, Iran,
Basement tanking Tunnel tanking Tunnel tanking Perth WA. Basement tanking
Roof waterprooÞng
Arab National Bank in Jeddah, Sárvár hotel, Hungary, Basement Darlot Gold Mine Cyanide Pond,
Palm Jumeirah Marina Apartments, Jebel Ali Airport, UAE,
Saudi Arabia, Basement tanking tanking Kalgoorlie WA
UAE, Basement tanking Tunnel tanking
7
The Watertight Difference
Trelleborg has a hundred years The unique Elastoseal EPDM
history of stability and commitment
to quality. Our operations are Rubber is elastic, not plastic. Vulcanization creates a stable
cross-linked polymer structure with unsurpassed dimensional
conducted according to ISO 9001
stability, elasticity and long term durability. As an operation
and ISO 14001. Products and within one of the global leaders in industrial rubber products,
systems are tested according to we have access to the most cost effective raw materials as
applicable standards, supervised by well as leading process technology. Trelleborg Technical
independent laboratories and Centre is working jointly with universities and technical
authorities and certified to local colleges to further improve our products. Our systems
building codes in all the markets involve patented, very competitive elastomeric materials
where we are active. and splicing techniques.
Brisbane Perth
Phone +61 (7) 3866 7444 Phone +61 (8) 9256 6000
0806
www.trelleborg.com.au www.trelleborg.com.au
9750 05/13