1- Hydrostatic pressure refers to o The fluid pressure within the pore space o The exerted pressure by the column of fluid o The pressure loss in the pumping system o The bottom hole pressure during pumping
2- In normal drilling operations, the drilling fluid is designed to
keep the hydrostatic pressure in the well bore o Underbalanced o Balanced o Overbalanced o Equalized
3- “Well control” may also be referred to as which of the
following o Hole control o Pressure control o Rig control o Drill control
4- In well control, what does the “Primary Barrier” refer to?
o The column of drilling fluid o The formation fluid o The drill bit o The BOP’s
5- When drill pipe is removed from the well
o It must be cleaned o It must be removed as fast as possible o The well must be kept full of drilling fluid o The drilling fluid in the drill pipe is returned to the mud pits 6- “Swabbing” is what happens when a reduction in bottom hole pressure is caused by o Pulling drill pipe from a well o Running drill pipe into a well o Pumping fluid too fast o Drill rotation
7- Once a well has been made safe, steps are taken to
o Remove the drill string from the well o Empty the mud pits o Recommence drilling o All of the above
8- What is the kill method of two circulations?
o The driller method o The wait and weight method o The heavy cement method o The volumetric method
9- What is used to control and maintain a constant bottom hole
pressure during a well kill circulating operations? o The correct drill string weight always being maintained by the draw work o Rotation of the drill pipe o A choke manifold o Blowout preventers
10- Which of the following best describes empowerment?
o Giving someone the authority or power to do something, regardless of their job roles o Awarding someone the authority or power to do something through promotion at work o Providing someone with training to enable them to do carry out their duties successfully o None of the above