Professional Documents
Culture Documents
Idoc - Pub - Ansys Aqwa Hydrodynamic Time Response PDF
Idoc - Pub - Ansys Aqwa Hydrodynamic Time Response PDF
2
14.5 Release
Drag and drop the Hydrodynamic Time Response to the WB Project Schematic while
sharing the solution from hydrodynamic diffraction
Double-click on Setup
© 2012 ANSYS, Inc. June 11, 2013 4 Release 14.5
Add fairlead connection points
Add four fairlead locations for the mooring system
Under Geometry in the Outline select Mooring Ship > Add > Connection
Point
Enter X,Y,Z coordinates in details panel as below (in global system!)
Repeat for other 3 connection points
• Point 2 20, -14.2, 8
• Point 3 180, 16, 8
• Point 4 180, -16, 8
Rename Connection Points as Fairlead 1 through 4
Length 400 m
Note the Exported column. If one or more of these boxes are checked then the
results for that particular design point(s) will be saved. Otherwise only the initial
design point (marked as Current) is preserved.