Professional Documents
Culture Documents
Patlite Catalogue PDF
Patlite Catalogue PDF
Signal Tower
LR Series
No.2 Leng Kee Road, #05-01 Thye Hong Centre, Singapore 159086
TEL. +65-6226-1111 FAX. +65-6324-1411 E-mail: sales@patlite.com.sg
www.patlite.com
Room 1102-1103, No.55, Lane 777, Guangzhong Road (West), ZhabeiDistrict, Shanghai, China 200072
TEL. +86-21-6630-8969 FAX. +86-21-6630-8938 E-mail: sales@patlite.cn
7F. No. 91, Huayin St, Datong District Taipei, Taiwan R.O.C
TEL. +886-2-2555-1611 FAX. +886-2-2555-1621 E-mail: info@patlite.tw
Olympia Thai Tower, 15th Floor 444 Ratchadapisek Road Samsennok, Huay Kwang Bangkok 10310, Thailand
TEL. +66-2-541-5431 FAX. +66-2-541-5429 E-mail: sales@patlite.co.th
IP65
For the benefit of mankind and the earth, Patlite is
committed to developing environmentally friendly
http://www.patlite.com products.
PATLITE,the PATLITE logo are either registered trademarks or trademarks of PATLITE Corporation in JAPAN and/or other countries.
NEMA 360° Buzzer Easy-build
Modular
Type 4X, 13
O-AG10B EN 1808 A
Signal Tower φ40mm φ50mm
Modular Components Example
LR4 LR5
LR
Modular LED Signal Tower
Series φ60mm
LR6
φ70mm
LR7
Body Units Buzzer Units LED Units Clear-globe LED Units Multi-color LED Units
“Click!”
Body, or “Click!”
LED Unit
ABS RESIN
240° 120° 240° 120°
1 2
New Lineup Wireless Data Acquisition System
Transmitters Receiver
4 (Φ40) R (Red)
5 (Φ50) Y (Amber)
6 (Φ60) G (Green)
B (Blue) Lights Lights
OFF ON
LR6
By connecting (red, green, blue) wires, the colors light up.
Individual Unit Individual Unit Signal Tower LR6 Transmitter Signal Tower LR5 Transmitter Receiver
Red/
LR4 LR5 LR6 It displays 7 colors in one unit.
Wire
Color
Red Red/ Blue Green Blue/ Red/ Green/ WDT-6LR-Z2 WDT-5LR-Z2 WDR-LE-Z2
Green Green Blue Blue
Clear globes for R,Y,G,B Pre-assembled※ (Red/Green/Blue/Amber/
LED
※ LR4, LR6 Only Cyan/Purple/White) Red Amber Blue Green Cyan Purple White Corresponding Model Current Consumption Corresponding Model Current Consumption Number of Transmitter Connection Type
Color
LR6 Series 55mA LR5 Series 55mA 20 Units ※1
max max
MAX 30 Units LAN/USB
Direct Mount with M12 Connector Transmission Distance Transmission Distance Transmission Distance ※3
●Direct Mount Installation ●Installation Method 2
20m 20m 65mA Multiple Units
※2 ※2
1 2 3
Unit Model It can easily be secured with an M30 nut.
(Body Unit) LR 6 - 02 WC N W Install below LED modules
1/2" NPT
6 φ60
1 - 5 Tiers 02 24V DC B Buzzer W Off-white
※ The M12 Connector Signal Tower with WD receiver acts as Receive raw
N No Buzzer WD transmitter installs
WC Direct Mount / M12 Connector LED Color: R(Red)/Y(Amber)/
G(Green)/B(Blue)/C(White)
& Cable (SZ-120) is a data bridge between equipment data for
(From top to bottom)
sold separately. easily on equipment transmitters and PCs export to CVS file
Signal Wireless
Receiver
Tower Transmitter
3 4
Signal Tower
LR4-502WJBW-RYGBCZ
4 LR5-401WJNW 4.0W 0.360kg
φ40mm (Ex.) 5 LR5-501WJNW 5.0W 0.400kg
12V DC
Model Code 1 LR5-101WJBW 2.1W 0.290kg
2 LR5-201WJBW 3.1W 0.330kg
Model ① ② ③ ④ ⑤ ⑥ ⑦ O 3 LR5-301WJBW 4.1W 0.370kg
① Tiers ② Rated Voltage ③ Mounting/Wiring ④ Flashing/Buzzer ⑤ Body Color ⑥ LED Module Color ⑦ Globe Type 4 LR5-401WJBW 5.1W 0.410kg
1 = 1 Tier 02 = 24V DC WJ = Direct Mount/Cable B = With Flashing/Buzzer W = Off-white R = Red Blank = Color Globe 5 LR5-501WJBW 6.1W 0.450kg
2 = 2 Tiers M2 = 100 - 240V AC *1 LJ = Pole Mount with L-bracket/Cable N = No Flashing/Buzzer U = Silver ※3 Y = Amber Z = Clear Globe φ40 1 LR4-102WJNW[U] 1.0W 0.205kg/0.355kg
3 = 3 Tiers PJ = Pole Mount with Circular Bracket/Cable G = Green 2 LR4-202WJNW[U] 0.240kg/0.390kg
2.0W
4 = 4 Tiers QJ = Pole Mount with Folding Bracket/Cable ※2 B = Blue
5 = 5 Tiers C = White Buzzer Buzzer 3 LR4-302WJNW[U] 3.0W 0.275kg
Type Type —
※1 For WJ, LJ and PJ type only ※2 For 24V DC and Off-white type only ※3 For 24V DC type WJ, LJ and PJ type only 3 LR4-302WJNW-□Z CLEAR 3.0W 0.275kg/0.425kg
4 LR4-402WJNW[U] 4.0W 0.310kg/0.460kg
LR5-502WJBW-RYGBCZ
5 LR4-502WJNW[U] 5.0W 0.345kg/0.495kg
φ60mm
Model Code
(Ex.)
LR6-502WJBW-RYGBCZ O
2
3
4
LR5-202WJBW
LR5-302WJBW
LR5-402WJBW
3.0W
4.0W
5.0W
0.330kg
0.370kg
0.410kg
5 LR5-502WJBW 6.0W 0.450kg
Model ① ② ③ ④ ⑤ ⑥ ⑦ 24V DC
1 LR6-102WJNW[U] 1.0W 0.280kg/0.410kg
φ60
① Tiers ② Rated Voltage ③ Mounting/Wiring ④ Flashing/Buzzer ⑤ Body Color ⑥ LED Module Color ⑦ Globe Type 2 LR6-202WJNW[U] 2.0W 0.340kg/0.470kg
1 = 1 Tier 02 = 24V DC WJ = Direct Mount/Cable B = With Flashing/Buzzer W = Off-white R = Red Blank = Color Globe Buzzer Buzzer 3 LR6-302WJNW[U] 3.0W 0.400kg/0.530kg
2 = 2 Tiers M2 = 100 - 240V AC *1 LJ = Pole Mount with L-bracket/Cable N = No Flashing/Buzzer U = Silver ※3 Y = Amber Z = Clear Globe Type Type —
3 LR6-302WJNW-□Z CLEAR 3.0W 0.400kg
3 = 3 Tiers PJ = Pole Mount with Circular Bracket/Cable G = Green
4 = 4 Tiers QJ = Pole Mount with Folding Bracket/Cable ※2 B = Blue 4 LR6-402WJNW[U] 4.0W 0.460kg/0.590kg
5 = 5 Tiers WC = Direct Mount/M12 Connector ※2 C = White Direct 5 LR6-502WJNW[U] 5.0W 0.520kg/0.650kg
M = Multi Color Mount
※1 For WJ, LJ and PJ type only ※2 For 24V DC and Off-white type only ※3 For 24V DC type WJ, LJ and PJ type only 1 LR6-102WJBW[U] 2.0W 0.340kg/0.470kg
2 LR6-202WJBW[U] 3.0W 0.400kg/0.530kg
LR7-502WJBW-RYGBC
3 LR6-302WJBW[U] 4.0W 0.460kg/0.590kg
O
φ70mm (Ex.) 3 LR6-302WJBW-□Z CLEAR 4.0W 0.460kg
4 LR6-402WJBW[U] 5.0W 0.520kg/0.650kg
Model Code 5 LR6-502WJBW[U] 6.0W 0.580kg/0.710kg
Model ① ② ③ ④ ⑤ ⑥ φ70 1 LR7-102WJNW 1.0W 0.305kg
Buzzer 2 LR7-202WJNW 2.0W 0.370kg
① Tiers ② Rated Voltage ③ Mounting/Wiring ④ Flashing/Buzzer ⑤ Body Color ⑥ LED Module Color Type
— 3 LR7-302WJNW 3.0W 0.435kg
1 = 1 Tier 02 = 24V DC WJ = Direct Mount/Cable B = With Flashing/Buzzer W = Off-white R = Red
2 = 2 Tiers N = No Flashing/Buzzer Y = Amber 4 LR7-402WJNW 4.0W 0.500kg
3 = 3 Tiers G = Green 5 LR7-502WJNW 5.0W 0.565kg
4 = 4 Tiers B = Blue 1 LR7-102WJBW 2.0W 0.375kg
5 = 5 Tiers C = White
2 LR7-202WJBW 3.0W 0.440kg
O 3 LR7-302WJBW 4.0W 0.505kg
4 LR7-402WJBW 5.0W 0.570kg
Mounting Type Rated Voltage Size Flash/Buzzer Tiers Model Power Consumption Mass 5 LR7-502WJBW 6.0W 0.635kg
1 LR4-102QJNW 1.0W 0.455kg φ40 1 LR4-1M2WJNW 1.5W 0.285kg
φ40 Buzzer Buzzer
Type 0.490kg Type 2 LR4-2M2WJNW 3.0W 0.320kg
2 LR4-202QJNW 2.0W
—
— 3 LR4-302QJNW 3.0W 0.525kg 3 LR4-3M2WJNW 4.5W 0.355kg
4 LR4-402QJNW 4.0W 0.560kg 4 LR4-4M2WJNW 6.0W 0.390kg
5 LR4-502QJNW 5.0W 0.595kg 5 LR4-5M2WJNW 7.5W 0.425kg
1 LR4-102QJBW 2.0W 0.490kg 1 LR4-1M2WJBW 3.0W 0.320kg
2 LR4-202QJBW 3.0W 0.525kg 2 LR4-2M2WJBW 4.5W 0.355kg
O O
3 LR4-302QJBW 4.0W 0.560kg 3 LR4-3M2WJBW 6.0W 0.390kg
4 LR4-402QJBW 5.0W 0.595kg 4 LR4-4M2WJBW 7.5W 0.425kg
5 LR4-502QJBW 6.0W 0.630kg 5 LR4-5M2WJBW 9.0W 0.460kg
24V DC 100 - 240V AC
1 LR6-102QJNW 1.0W 0.520kg φ60 1 LR6-1M2WJNW 1.5W 0.380kg
φ60 Buzzer Buzzer
Pole Mount with Type 2 LR6-202QJNW 2.0W 0.580kg Type 2 LR6-2M2WJNW 3.0W 0.440kg
Folding Bracket — 3 LR6-302QJNW 3.0W 0.640kg — 3 LR6-3M2WJNW 4.5W 0.500kg
4 LR6-402QJNW 4.0W 0.700kg 4 LR6-4M2WJNW 6.0W 0.560kg
5 LR6-502QJNW 5.0W 0.760kg 5 LR6-5M2WJNW 7.5W 0.620kg
1 LR6-102QJBW 2.0W 0.580kg 1 LR6-1M2WJBW 3.0W 0.440kg
2 LR6-202QJBW 3.0W 0.640kg 2 LR6-2M2WJBW 4.5W 0.500kg
O 3 LR6-302QJBW 4.0W 0.700kg O 3 LR6-3M2WJBW 6.0W 0.560kg
4 LR6-402QJBW 5.0W 0.760kg 4 LR6-4M2WJBW 7.5W 0.620kg
5 LR6-502QJBW 6.0W 0.820kg 5 LR6-5M2WJBW 9.0W 0.680kg
5 6
—
Signal Tower
φ60
※ Not suitable for KC (KN 61000-6-4, KN 61000-6-2) and Low Voltage Directive (TEC / EN 60947-5-1, EN 62471).
7 8
Signal Tower
3 Easy Steps
Select an LED Unit
1 2 3
Remove the headcover
Attach from bottom to
Attach
top, oneone LED
LED unit
unit atat
aa Replace the headcover, See the Movie!!
to setup the body unit time Scan the QR code to see how
time to
to the
the body
body unit
unit or attach the buzzer unit
easy the LR is to configure.
Size Color Model
LR4-E-R/Y/G/B/C
φ40
Y B LR4-E-RZ/YZ/GZ/BZ CLEAR
LR5-E-R/Y/G/B/C
φ50
R LR4-E-RZ/YZ/GZ/BZ CLEAR
LR6-E-R/Y/G/B/C
G C φ60
LR6-E-RZ/YZ/GZ/BZ CLEAR
LR4 - 7
φ70 LR7-E-R/Y/G/B/C
Φ40 - Φ70
φ60 LR6-E-MZ Multi-color
Mounting Type Rated Voltage Size Model Mounting Type Rated Voltage Size Model Removable
Screwless Terminal
12V DC φ50 LR5-01WJNW 12V DC φ50 LR5-01PJNW
φ40 LR4-02WJNW[U] φ40 LR4-02PJNW[U]
φ50 LR5-02WJNW Pole Mount with 24V DC φ50 LR5-02PJNW
Direct 24V DC Circular Bracket/Cable
φ60 LR6-02WJNW[U] φ60 LR6-02PJNW[U] A new removable terminal
Mount/Cable
φ40 LR4-M2PJNW for easier wiring.
φ70 LR7-02WJNW
100 - 240V AC
φ40 LR4-M2WJNW φ60 LR6-M2PJNW Screwless
100 - 240V AC Terminal
φ60 LR6-M2WJNW 12V DC φ50 LR5-01LJNW
φ40 LR4-02LJNW[U]
φ50 LR5-02WTNW[U][K]
Pole Mount with 24V DC φ50 LR5-02LJNW
Direct Mount/ 24V DC
Screwless Terminal L-bracket/Cable φ60 LR6-02LJNW[U]
φ70 LR7-02WTNW[U][K]
φ40 LR4-M2LJNW
100 - 240V AC
φ60 LR6-M2LJNW
φ50 LR5-02KTNW[U][K] The terminal can be pulled out
Knock-out Mount/
Screwless Terminal 24V DC
φ40 LR4-02QJNW
φ70 LR7-02KTNW[U][K]
Pole Mount with 24V DC
Folding Bracket/Cable
φ60 LR6-02QJNW
Direct Mount/ 24V DC φ60 LR6-02WCNW
M12 Connector
9 10
Signal Tower
Circular Bracket Wall-mount Bracket Circular Multiple-mount Circular Bracket Circular Bracket
Model: SZW-001W Model: SZK-002W/U/K SZK-003W/U/K SZK-004W Bracket Model: SZP-002U Model: SZP-003W/U/K
Material: SPCE Material: PC Material: PC Material: PC Model: SZP-001W Accessories: Pole Waterproof Ring
Binding Head Tapping
Accessories: Waterproof Packing
Pole Waterproof Ring
Accessories: Waterproof Packing Screw (2 pcs.) Binding Head Tapping
Pole Waterproof Ring Material: ADC12 Screw (2 pcs.)
█ Mounting Dimensions (Unit: mm) For K type
For K type Binding Head Tapping Screw (2 pcs.) Material: PC
90° For U type
Material: PC
█ Mounting Dimensions (Unit: mm)
For LR4/5
For U type
For LR6/7
For LR6/7 █ Mounting Dimensions (Unit: mm)
█ Mounting Dimensions (Unit: mm) 90°
Mounting Hole (Ø5x3)
█ Mounting Dimensions Wire Exit 90° Mounting Hole (φ5x3) Mounting Hole (φ5x4)
Mounting Hole Ø6x4 120°
(Unit: mm) Wire Exit Ø54
Hole (Ø12) Hole (Ø12) Mounting Hole (φ5x4) Mounting Hole (φ5x4) 120°
Ø73 Ø40
Mounting Hole (Ø6x4) Ø54-Ø56
※ The wiring can exit
Wire Exit Hole (Ø12) through the bracket. Ø40-Ø50 φ54-φ56
φ73
M5 Mounting M5 Mounting M4 Mounting M4 Mounting M4 Mounting
(25)
Recommended Torque Recommended Torque ※An M16xP1.5 cable gland attachment Recommended Torque Wire Exit Recommended Torque
120° Recommended Torque
needs to be purchased additionally Wire Exit
1.4 N/m 1.4 N/m 0.6 N/m Hole (Ø12) 0.6 N/m 0.6 N/m
Hole (Ø12)
∅15
Mounting Hole (φ6x4) 46
Ø5 Mounting Hole (φ6x3)
5
55
18.5
75
Screw,Nut
φ54 -φ56 2-Ø11 ※1 : M8×2pcs.
15 20 30
Ø9
80
M5 Mounting
Click! Recommended Hole (Ø15) Product Mounting
screw Torque M5 Mounting
(25)
Recommended Torque Recommended Torque Hole 3 places Recommended Torque Product Mounting Recommended Torque
Locking Lever (20)
Location 1.4 N/m See the Movie! 3 12.2 Nm
1.4 N/m 0.6 N/m Hole 3 places 0.6 N/m
11 12
Signal Tower Signal Tower
12.5
Signal Tower Size φ40mm φ50mm φ60mm φ70mm Mounting
Wire Hole
Exit Hole (3−φ4) φ30
SZK-001U LJ, PJ, QJ LJ, PJ, KT ※1
LJ, PJ, QJ KT ※1 Product LCE-AW LE-W/LES-AW/LU5 LME-W LHE/LU7 Nameplate (φ13)
Conversion → LR4-WJ → LR5-WJ →LR6-WJ → LR7-WJ Location Nameplate
Location (Unit: mm)
Model Type Model Name SZP-001W SZP-002U SZP-003W SZQ-001W SZK-001U SZL-001
Replacement Parts
POLE22-0100AN[K]
100mm ○ ○ ○ ○ ○ ×
█ O-ring (5 per pack)/Headcover
POLE22-0300AN[K]
300mm ○ ○ ○ ○ ○ ×
POLE22-0500AN
× ○ × × ○ ×
O-ring 40 Headcover 40 O-ring 50 Headcover 50 O-ring 60 Headcover 60 O-ring 70 Headcover 70
500mm Model: Model: Model: Model: Model: Model: Model: Model:
B25110065-F1 [W] B32310070-7F1 B25110066-F1 [W] B32310071-7F1 B25110067-F1 [W] B32310072-7F1 B25110068-F1 [W] B32310073-7F1
POLE22-0800AN[K]
× ○ × × ○ ×
[U] B32310070-9F1 [K] B32310071-8F1 [U] B32310072-9F1 [K] B32310073-8F1
800mm [U] B32310071-9F1 [U] B32310073-9F1
N Type NK Type
POLE22-1000AN Base Unit █ Te r m i n a l B l o c k
× ○ × × ○ ×
█
1000mm (LR5 & LR7 only)
● Adaptor for Aluminum Pole
POLE22-0100AT O-ring, Binding Head Tapping Screw for
× × × × ○ ○
LR4 LR5 LR6 LR7
100mm pole fixing and Pole Waterproof Ring are
Nuts included.
Incl. Model: Model: Model: Model:
POLE22-0300AT
300mm × × × × ○ ○ [W] B22210159-7F1
[U] B22210159-9F1
[W] B22210160-7F1
[K] B22210160-8F1
[W] B22210161-7F1
[U] B22210161-9F1
[W] B22210178-7F1
[K] B22210178-8F1
[U] B22210160-9F1 [U] B22210178-9F1 Model: Z69544511-F1
POLE22-0500AT
500mm × × × × ○ ○ █ Filter Sheet (5 per pack)
POLE22-0800AT
800mm
× × × × ○ ○ LR5 LED Unit Sheet LR6 LED Unit Sheet LR7 LED Unit Sheet
LR4 LED Unit Sheet
Model: B25310067-4F1 Model: B25310067-5F1 Model: B25310067-6F1 Model: B25310067-7F1
T Type
POLE22-1000AT × × × × ○ ○
1000mm
13 14
■Wire Type & Wire Gauge
External Contact Classification External Contact Classification Lighting / Flashing / Buzzer (LR6-E-MZ) Purple Red + Blue Lighting / Buzzer ( LR6-WC )
Flashing/ Cyan Green + Blue
Voltage Contact Relay Voltage Contact Relay Buzzer Product Specifications 02 24V DC White Red + Green + Blue
Product Specifications 02 WC 24V DC
External
Contact Do not Apply Voltage!
External Contact Classification
LR4 ~ LR7 LR4 ~ LR7 External Contact Classification
Flashing Flashing
Common Line Brown / ⑧(Not used) Common Line Brown /⑧ Voltage Contact Relay
Voltage Contact Relay Flashing/
LED Red Red / ① LED Red Red /①
Buzzer
LED Amber Orange / ② LED Amber Orange /②
Lighting Lighting/ External
LED Green Green / ③ LED Green Green /③ Contact LR6
Buzzer
LED Blue Blue / ④ LED Blue Blue /④ LR6
External External
LED White White / ⑤ Contact LED White White /⑤ Contact Flashing
Common Line Brown
LED Red ⑥
Buzzer Purple / ⑥(Not used) Buzzer Purple /⑥ Red
LED Red LED Amber ④
LED Amber Orange(Not used) Lighting/
Power Supply Wire Gray / ⑨(Not used) Power Supply Wire Gray /⑨ LED Green ③ Buzzer
Power Supply Wire Yellow / ⑦ Power Supply Wire LED Green Green
Yellow /⑦ Lighting/ LED Blue ⑦
Blue External
LED Blue Buzzer LED White Contact
Fuse Fuse ①
1A 12 V DC ( LR5 only) (Class 2) (No polarity) 1A 12 V DC ( LR5 only) (Class 2) (No polarity) LED White White (Not used)
External Buzzer ②
24 V DC (Class 2) (No polarity) ※ Used when buzzer unit is attached. 24 V DC (Class 2) (No polarity) Purple Contact
Buzzer
Power Supply Wire ⑧
Power Supply Wire Gray
Do not Apply Voltage! Power Supply Wire ⑤
External Contact Classification External Contact Classification PLC Power Supply Wire Yellow
Fuse
Fuse 1A 24 V DC (Class 2) (No polarity)
PLC (NPN Transistor) PLC (NPN Transistor) 1A 24 V DC (Class 2) (No polarity) ※ Used when buzzer unit is attached.
Flashing/ ※ Used when buzzer unit is attached.
Buzzer
Do not Apply Voltage!
Output External Contact Classification PLC External Contact Classification
LR4 ~ LR7 LR4 ~ LR7 Unit B
Flashing Flashing PLC (NPN Transistor) PLC (NPN Transistor)
Common Line Brown / ⑧(Not used) Common Line Brown /⑧
PLC Flashing/
LED Red Red / ① LED Red Red /①
Buzzer
LED Amber Orange / ② LED Amber Orange /② Lighting/
Lighting Output
LED Green Green / ③ LED Green Green /③ Buzzer LR6 LR6
Unit B
LED Blue Blue / ④ Output LED Blue Blue /④ Output Flashing
Common Line Brown
Unit Unit A PLC
LED White White / ⑤ LED White White /⑤ LED Red Red LED Red ⑥
Buzzer Purple / ⑥(Not used) Buzzer Purple /⑥ Orange (Not used)
LED Amber LED Amber ④ Lighting/
Transistor Transistor
Schematic Schematic LED Green Green Lighting/ LED Green ③ Buzzer
Power Supply Wire Gray /⑨(Not used) C Power Supply Wire Gray / ⑨ C Buzzer
LED Blue Blue LED Blue ⑦ Output
Yellow /⑦ B Yellow / ⑦ B
Power Supply Wire E Power Supply Wire E Output Unit
LED White White (Not used) LED White ①
Fuse Fuse Purple
Unit A
12 V DC ( LR5 only) (Class 2) 12 V DC ( LR5 only) (Class 2) Buzzer Buzzer ②
1A 1A
24 V DC (Class 2) ※ Used when buzzer unit is attached. 24 V DC (Class 2) Transistor
Transistor Schematic
Power Supply Wire Gray Power Supply Wire ⑧
Schematic C
Power Supply Wire Yellow B
C Power Supply Wire ⑤ E
Do not Apply Voltage! B
External Contact Classification External Contact Classification PLC Fuse E Fuse
1A 24 V DC (Class 2) ※ Used when buzzer unit is attached. 1A 24 V DC (Class 2)
※ Used when buzzer unit is attached.
PLC(PNP Transistor) PLC(PNP Transistor) Flashing/
Buzzer Do not Apply Voltage!
External Contact Classification PLC External Contact Classification
Output
Unit B PLC(PNP Transistor) PLC(PNP Transistor)
LR4 ~ LR7 LR4 ~ LR7
Flashing Flashing Flashing/
Common Line Brown / ⑧(Not used) Common Line Brown /⑧
PLC Buzzer
LED Red Red / ① LED Red Red /①
Output
LED Amber Orange / ② LED Amber Orange /② LR6 Unit B LR6
Lighting Lighting/
LED Green Green / ③ LED Green Green /③ Buzzer Flashing
Common Line Brown
LED Blue Blue / ④ Output LED Blue Blue /④ Output PLC
LED Red Red LED Red ⑥
White / ⑤ Unit White /⑤ Unit A
LED White LED White LED Amber Orange (Not used) ④
LED Amber Lighting/
Buzzer Purple / ⑥(Not used) Buzzer Purple /⑥
LED Green Green Lighting/ LED Green ③ Buzzer
Transistor Transistor
LED Blue Blue Buzzer
Schematic Schematic LED Blue ⑦ Output
Power Supply Wire Gray / ⑨(Not used) Power Supply Wire Gray /⑨ Output
C C LED White White (Not used) LED White ① Unit
Power Supply Wire Yellow /⑦ B Power Supply Wire Yellow / ⑦ B Unit A
E E Buzzer Purple Buzzer ②
Fuse Fuse
1A 12 V DC ( LR5 only) (Class 2) 1A 12 V DC ( LR5 only) (Class 2) Transistor
24 V DC (Class 2) ※ Used when buzzer unit is attached. 24 V DC (Class 2) Power Supply Wire Gray Transistor Power Supply Wire ⑧
Schematic
Schematic C
《 LR Series 2-Buzzer Operation Method 》 Power Supply Wire Yellow
C Power Supply Wire ⑤
E
B
Connecting the Buzzer wire (Purple) with the Flashing Common wire (Brown) will Fuse B
E Fuse
1A 24 V DC (Class 2) 24 V DC (Class 2)
control the selection of two different buzzer sounds. ※ Used when buzzer unit is attached. ※ Used when buzzer unit is attached. 1A
Point Point
■Wire Type & Wire Gauge ・The flashing function cannot be used.
Product Specifications M2 100 - 240 V AC Wire Type……UL2464
・When flashing the LR6-E-MZ simultaneously with the LR6-E-R(Z)/Y(Z)/G(Z)/B(Z)/C,
the flashing cycle of the LR6-E-MZ may shift from the other LED units.
Wire Gauge…[M2] 100~240V AC
Signal Wire : AWG24
Power Supply Wire : AWG18
Only apply voltage to Power Supply Wires.
Only apply voltage to Power Supply Wires.
[WT],[KT] Terminal Type M12 Connector Pin Layout
PLC
External Contact Classification External Contact Classification █ Wiring Method █ Terminal Block Array
Flashing/ Flashing/
Voltage Contact Relay Buzzer PLC (NPN Transistor) Buzzer A minus driver, etc., is used 9 9 Black Power (Signal)
External Output
1 to pry the Terminal Block
open by pushing straight
8 8 Grey Flashing Common
Contact Unit B onto the lever slot. 7 7 Yellow Power (Common) ⑧ Power Supply Wire
LR4 , LR6
Flashing
LR4 , LR6
Flashing
6 6 Grey Buzzer ② Buzzer ① LED White
Common Line Brown Common Line Brown The stripped lead wire
2 is inserted into the slot. 5 5 White LED White
LED Red Red LED Red Red
Orange 3
4 4 Blue LED Blue ③ LED Green 2 1 ⑦ LED Blue
LED Amber
3
LED Amber Orange Point
Lighting/ Lighting/ Removing the driver 3 Green LED Green 8 7
LED Green Green Buzzer LED Green Green
3 releases the lever. . It is recommended
LED Blue Blue External LED Blue Blue
Buzzer
1 2 2 2 Orange LED Yellow 3
to use the M12
④ LED Amber
LED White White Contact LED White White
Output
Unit A 1 1 Red LED Red 4
6
Connector Cable
Buzzer Purple Buzzer Purple Lever █ Recommended lead wire specification
5 ⑥ LED Red (Optional Part) for
Lighting Lighting Wire Type Wire (Solid) Wire (Frayed) ⑤ Power Supply Wire wiring.
Common Line Yellow Common Line Yellow Schematic UL1007 / UL1430 0.14 - 1.5mm AWG30 - 14
Power Supply Wire Gray Gray
Power Supply Wire C • Temperature rating should be above 750C, and the
Power Supply Wire Black B
Power Supply Wire Black E conductor material should be of copper wire.
Fuse 100 - 240 VAC Fuse
1A 1A 100 - 240 VAC
※ Used when buzzer unit is attached. ※ Used when buzzer unit is attached.
15 16
Outer
外 観 図Dimensional Drawing
(単位 : mm) (Unit: mm) Mounting Dimensions ( Unit: mm)
Mount A [WJ] Direct Mount/Cable Mount B [LJ] Pole Mount with L-bracket & Cable
(01: 12V DC / 02: 24V DC) (M2: 100-240V AC) (01: 12V DC / 02: 24V DC) (M2: 100-240V AC) Mount A Mounting Diagram Mount B Mounting Diagram Mount C Mounting Diagram
[WJ] / [PJ] / [WT] / [KT] [LJ] [QJ]
12V DC LR4:ɸ40, LR5: ɸ50, 100-240V LR4:ɸ40, LR6: ɸ60 12V DC LR4:ɸ40, LR5: ɸ50, LR6: ɸ60 100-240V LR4:ɸ40, LR6: ɸ60
24V DC LR6: ɸ60, LR7: ɸ70 AC 24V DC AC
For M8 bolt and nut size
(※) KT Direct Mount when
Mounting
Nut/ Mounting Hole
53.5 53.5 Mounting Holes x3 using accessory) φ6x4 90° Wire Hole
1 53.5 1 53.5 1 1
Screw
L-bracket 1 (φ9)
φ15
2 40
40 LR4/5-WJ
φ4 M3
LR4/5-WJ
φ30 2 3
3 3 2 LR5-WT/KT ※ LR5-WT/KT ※
40 40 Feed the wiring
LR4/5/6-PJ LR4/5/6-PJ
through the hole 3 20
LR6/7-WJ φ5 M4 LR6/7-WJ φ40 Mounting
< 02: Height > < M2: Height > < LJ: Height > < LJ: Height > and set the pole
LR7-WT/KT ※ LR7-WT/KT ※ Hole φ6x4
1 Tier: 173.5 1 Tier: 243.5 1 Tier: 173.5 1 Tier: 243.5 in place to install. Mounting
2 Tiers: 213.5 2 Tiers: 213.5 Surface Nut/Screw
2 Tiers: 283.5 2 Tiers: 283.5 Recommended Torque
3 Tiers: 253.5 3 Tiers: 253.5 M5x4 18.5
3 Tiers: 323.5 3 Tiers: 323.5 30 N.m
4 Tiers: 293.5 4 Tiers: 363.5 4 Tiers: 293.5 4 Tiers: 363.5 For M10 bolt and nut size
5 Tiers: 333.5 5 Tiers: 403.5 5 Tiers: 333.5 5 Tiers: 403.5 Mounting Hole
Point
120°
When not using an L-bracket 1 (φ11) φ54 - φ56
From Pole
4 3 120° center
3 L-bracket, make a 36.9
5 70 4 fitting hole of φ φ73
4 22-23mm.
6 140 3 35
12 4
(15) Recommended Bolt Torque Bracket
(90) 5 (15) Shape
ɸ21.7 12.2 N/m Mounting
Surface Nameplate
6 5 5 ɸ21.7
7 12 Make holes for the mounting and wire-distribution. Refer to the
(90) (285) 1
Wiring Hole (φ12) suitable attachment or mounting dimension figure for the model.
(285) (Select among the two mounting options for the KT model.
9 9 Nameplate
7
Maximum Thickness: 7 Maximum Thickness: 7 Position Recommended Torque
Run wiring Secure the product with the bolts, nuts and
Cable Length: (1300) Cable Length: (1300) 8 8 2 3 screws. Required nuts and bolts for LJ are not Recommended Torque
0.6 N/m through the
U type: (3300) U type: (3300) mounting hole. included. 1.4 N/m
Cable Diameter: ɸ7.5 Cable Diameter: ɸ7.5 (20)
6 6
(90) (90) 80
No. Description Material
7 7
① Buzzer Unit PC
20 55 3
② Head Cover PC Spe c if ic a t ions
③ LED Unit Globe: PC Cable Length: (1000) Cable Length: (1000)
④ Body PC U type: (3000) U type: (3000) Operating Ambient Temperature -20 - +50℃
⑤ Direct Mount Bracket PC Cable Diameter: ɸ7.5 Cable Diameter: ɸ7.5 Operating Ambient Humidity Less than 90% RH (No Condensation)
⑥ Waterproof Packing Silicon Rubber
Description
Storage Ambient Temperature -30 - +60℃
⑦ Cable PVC No. Material
① Buzzer Unit PC Storage Ambient Humidity Less than 90% RH (No Condensation)
② LED Unit Globe: PC Mounting Location Indoor Only
LR5 : ɸ50 LR7 : ɸ70
Mount A [WT] Direct Mount/ ③ Body PC
2
19 ④ Pole Bracket PC Mounting Direction Upright
Screwless Terminal (Body Unit) 4 ⑤ Pole AL
Protection Rating*1 IP65 (IEC 60529) / NEMA TYPE 4X, 13
5 80 ⑥ Rubber Bushing EPR Rubber
⑦ Cable PVC Environmental Conditions Upright
6
12 ⑧ L-bracket Steel Insulation Resistance More than 1MΩ at DC500V between live part and non-current carrying metallic part
⑨ Hexagon Nut M22 SUM
Maximum Thickness: 7 Withstand Voltage 500V AC applied for 1 minute between live part and non-current carrying metallic part without breaking insulation (M2: 1500V AC for 1 min.)
Flash Rate 60 ±2 Flashes Per Minute
Sound Pressure Level LR4 Typ. 85dB LR5 Typ. 85dB LR6 Typ. 88dB LR7 Typ. 90dB LR5 DC12V Typ. 80dB
Mount A [PJ] Pole Mount with/Circular Bracket & Cable Mount C [QJ] Pole Mount with/Folding Mount C [WC] Direct Mount with
(01: 12V DC / 02: 24V DC) Sound Reduction*2 Approx. -10dB
Bracket & Cable M12 Connector
(M2: 100-240V AC) (02: 24V DC) (02: 24V DC) Environmental Conditions Buzzer Sound No.4 was measured from the total circumfrence of the Buzzer Unit at 1m
12V DC LR4: ɸ40, LR5: ɸ50, LR6: ɸ60 100-240V LR4: ɸ40, LR6: ɸ60 12V DC LR4: ɸ40, LR6: ɸ60 12V DC Buzzer Sound 4 patterns*2 No.1 Rapid Intermittent beep No.2 Continuous beep sound No.3 Rapid Hi-low No.4 Sweep sound
24V DC AC 24V DC 24V DC
Transistor Output NPN / PNP (100 - 240V AC is NPN only)
1 53.5 LR6: ɸ60
1 53.5 1 53.5 ●UL 508, CSA-C22.2 No.14 ●EMC Directive (EN 61000-6-4, EN 61000-6-2)
2 2 2
40 Conformity Standards ●FCC Part 15 Subpart B Class A ●KC (KN 61000-6-4, KN 61000-6-2)*3
40 40 1
19 ●RoHS Directive (EN 50581) ●Low-voltage Directive (IEC/EN 60947-5-1, EN62471)*4
< PJ: Height > < QJ: Height > *1: LJ Type is IP54 *2: Dependent on DIP Switch Settings *3: Except KT and M2 LJ Type *4: M2 Type Only (Except LJ Type)
2 40
1 Tier: 173.5 < PJ: Height > 1 Tier: 173.5
2 Tiers: 213.5 1 Tier: 243.5 2 Tiers: 213.5
3 Tiers: 253.5 2 Tiers: 283.5 3 Tiers: 253.5
4 Tiers: 293.5 3 Tiers: 323.5 4 Tiers: 293.5 Ex t e r na l C ont a c t C a pa c it y Is:Current Capacity Vs:Withstand Voltage IL:Leakage Current Ta:Ambient Temperature
5 Tiers: 333.5 4 Tiers: 363.5 5 Tiers: 333.5
< QJ: Height > Rated Load Voltage
5 Tiers: 403.5 01 12V DC 02 24V DC M2 100 - 240V AC
3 1 Tier: 126
(15) 3 3
3 Tiers: 246 LED Unit Signal Wire Current (Max.) / Voltage 100mA / Power Supply Voltage 45mA / Power Supply Voltage 45mA / 24V DC
(15)
4 (1 Tier) Recommended Contact Capacity Is ≧ 100mA Vs ≧ 20V DC*1 Is ≧ 100mA Vs ≧ 35V DC Is ≧ 100mA Vs ≧ 35V DC
(15) 4
ɸ21.7 3 Signal Wire Current (Max.) / Voltage 250mA / Power Supply Voltage 250mA / Power Supply Voltage 250mA / 24V DC
4 Buzzer
5
ɸ21.7
Recommended Contact Capacity Is ≧ 300mA Vs ≧ 20V DC*1 Is ≧ 300mA Vs ≧ 35V DC Is ≧ 300mA Vs ≧ 35V DC
5 5
ɸ21.7 Power Current Consumption (Max.) 500mA 250mA 150mA
4 Supply Recommended Contact Capacity Is ≧ 700mA Vs ≧ 20VDC Is ≧ 500mA Vs ≧ 35V DC Inrush current or more contacts
(290)
10
(335) 5 25 Signal Wire LED None*1 / Buzzer None LED None / Buzzer None None
(290)
6 Ta=25℃ : 25A /
6
Inrush Current Less than 2ms (Cold-start)
ɸ52 M30×1.5
Power Supply Wire 0.7A / Less than 15ms None
7
(6)
35 6 1/2’’NPT Internal Threads
Ta=50℃ : 50A /
(90) 6
(49)
79
Maximum Board Thickness : 10 Less than 2ms (Cold-start)
(6)
35
ɸ60 8 7
(90)
7
(90)
Leakage Current IL ≦ 0.1 mA
8 *1: When the ( Gray for WJ LJ PJ QJ , Black / ⑨ for WT KT , ⑧ for WC ) power supply wire is not connected, inrush current of 0.7A will flow through the signal wire.
ɸ60 8
□70 Recommended Contact Capacity : ≧ 700mA Vs ≧ 20VDC
Cable Length: (1000)
U type: (3000) Cable Length: (1000) Cable Length: (950)
Cable Diameter: ɸ7.5 Cable Diameter: ɸ7.5 Cable Diameter: ɸ7.5
LED U nit Spe c if ic a t ions B uzze r U nit Specificatio n s
No. Description Material No. Description Material No. Description Material
① Buzzer Unit PC ① Buzzer Unit PC ① Head Cover PC Color Red Amber Green Blue White Multi-color Rated Voltage 24V DC
② LED Unit Globe: PC ② LED Unit Globe: PC ② LED Unit Globe: PC Rated Voltage 24V DC Current Typ. 0.04A
③ Body PC ③ Body PC ③ Body PC
Typ. 0.04A Consumption Max. 0.3A
④ Pole Bracket PC ④ Pole Bracket PC ④ Direct Mount Bracket PC Current
⑤ Pole AL ⑤ Pole AL ⑤ Waterproof Packing (t=1) Silicone Rubber Consumption Max. 0.045A Typ. 1W
Power
17 ⑥ Circular Bracket PC ⑥ Folding Bracket PC ⑥ M30 Nut PC 18
Power Typ. 1W Consumption Max. 1.3W
⑦ Waterproof Packing Silicon Rubber ⑦ Waterproof Packing CR
Consumption Max. 1.3W
⑧ Cable PVC ⑧ Cable PVC
LR Series Compatibility Chart (φ40 - φ50) LR Series Compatibility Chart (φ50 - φ60)
Current Models Succeeding Models Current Models Succeeding Models
Series Voltage Installation Type Buzzer Model Model Comment Installation Pitch Fixed Wiring Hole Series Voltage Installation Type Buzzer Model Model Comment Installation Pitch Fixed Wiring Hole
LCE-102(A)FBW LR4-102WJBW ○ × LE-102FBW LR5-102WJBW ○ ×
LCE-202(A)FBW LR4-202WJBW ○ × LE-202FBW LR5-202WJBW ○ ×
○ LCE-302(A)FBW LR4-302WJBW ○ × ○ LE-302FBW LR5-302WJBW ○ ×
LCE-402(A)FBW LR4-402WJBW ○ × LE-402FBW LR5-402WJBW ○ ×
19 20
LR Series Compatibility Chart (φ60 - φ70) LR Series Compatibility Chart (φ60 - φ70)
Current Models Succeeding Models Current Models Succeeding Models
Series Voltage Installation Type Buzzer Model Model Comment Installation Pitch Fixed Wiring Hole Series Voltage Installation Type Buzzer Model Model Comment Installation Pitch Fixed Wiring Hole
LME-102FBL LR6-102LJBW ○ ○ LMS-102 LR6-102PJNW ○ ×
Pole Mount
LME-202FBL LR6-202LJBW ○ ○ LMS-202 LR6-202PJNW ○ ×
(Circular-
○ LME-302FBL LR6-302LJBW ○ ○ mount × LMS-302 LR6-302PJNW ○ ×
LME-402FBL LR6-402LJBW ○ ○ Bracket) LMS-402 LR6-402PJNW ○ ×
Pole Mount LME-502FBL LR6-502LJBW ○ ○ LMS-502 LR6-502PJNW ○ ×
(L-bracket) LME-102L LR6-102LJNW ○ ○ LMS-102L LR6-102LJNW ○ ○
LME-202L LR6-202LJNW ○ ○ LMS-202L LR6-202LJNW ○ ○
24V AC/DC LMS 24V AC/DC Pole Mount ×
× LME-302L LR6-302LJNW ○ ○ LMS-302L LR6-302LJNW ○ ○
φ60 (L-bracket)
LME-402L LR6-402LJNW ○ ○ LMS-402L LR6-402LJNW ○ ○
LME-502L LR6-502LJNW ○ ○ LMS-502L LR6-502LJNW ○ ○
LME-102FBK LR6-102PJBW × × LMS-102K LR6-102PJNW × ×
LME-202FBK LR6-202PJBW × × Pole Mount LMS-202K LR6-202PJNW × ×
Pole Mount SZK-001U SZK-001U
(Wall-mount ○ LME-302FBK LR6-302PJBW × × (Wall-mount × LMS-302K LR6-302PJNW × ×
Bracket) LME-402FBK LR6-402PJBW × × Bracket) LMS-402K LR6-402PJNW Purchase the SZK-001U × ×
Purchase SZK-001U option bracket
LME-502FBK LR6-502PJBW additionally. × × LMS-502K LR6-502PJNW option bracket additionally. × ×
LME-110FBW / LME-112FBW LR6-1M2WJBW ○ × LHE-102AFB LR7-102WJBW ○ ×
LME-210FBW / LME-212FBW LR6-2M2WJBW ○ × LHE-202AFB LR7-202WJBW ○ ×
○ LME-310FBW / LME-312FBW LR6-3M2WJBW ○ × ○ LHE-302AFB LR7-302WJBW ○ ×
LME-410FBW / LME-412FBW LR6-4M2WJBW ○ × LHE-402AFB LR7-402WJBW ○ ×
LME-510FBW / LME-512FBW LR6-5M2WJBW ○ × LHE-502AFB LR7-502WJBW ○ ×
Direct Mount 24V AC/DC
LME-110W / LME-112W LR6-1M2WJNW ○ × LHE-102A LR7-102WJNW ○ ×
LME-210W / LME-212W LR6-2M2WJNW ○ × LHE-202A LR7-202WJNW ○ ×
× LME-310W / LME-312W LR6-3M2WJNW ○ × × LHE-302A LR7-302WJNW ○ ×
LME-410W / LME-412W LR6-4M2WJNW ○ × LHE-402A LR7-402WJNW ○ ×
LME-510W / LME-512W LR6-5M2WJNW ○ × LHE-502A LR7-502WJNW ○ ×
LME-110FB / LME-112FB LR6-1M2PJBW ○ × LHE-110AFB / LHE-112AFB LR6-1M2WJBW ○ ×
LME-210FB / LME-212FB LR6-2M2PJBW ○ × LHE-210AFB / LHE-212AFB LR6-2M2WJBW ○ ×
○ LME-310FB / LME-312FB LR6-3M2PJBW ○ × ○ LHE-310AFB / LHE-312AFB LR6-3M2WJBW ○ ×
LME-410FB / LME-412FB LR6-4M2PJBW ○ × LHE-410AFB / LHE-412AFB LR6-4M2WJBW ○ ×
100V AC / Pole Mount LME-510FB / LME-512FB LR6-5M2PJBW ○ × LHE-A 100V AC / LHE-510AFB / LHE-512AFB LR6-5M2WJBW ○ ×
Direct Mount
120V AC (Circular- LME-110 / LME-112 LR6-1M2PJNW ○ × φ70 120V AC LHE-110A / LHE-112A LR6-1M2WJNW ○ ×
mount
LME-210 / LME-212 LR6-2M2PJNW ○ × LHE-210A / LHE-212A LR6-2M2WJNW ○ ×
Bracket)
× LME-310 / LME-312 LR6-3M2PJNW ○ × × LHE-310A / LHE-312A LR6-3M2WJNW ○ ×
LME-410 / LME-412 LR6-4M2PJNW ○ × LHE-410A / LHE-412A LR6-4M2WJNW ○ ×
LME-510 / LME-512 LR6-5M2PJNW ○ × LHE-510A / LHE-512A LR6-5M2WJNW ○ ×
Available for φ60 only.
LME-110FBL / LME-112FBL LR6-1M2LJBW ○ ○ LHE-120AFB LR6-1M2WJBW ○ ×
LME-210FBL / LME-212FBL LR6-2M2LJBW ○ ○ LHE-220AFB LR6-2M2WJBW ○ ×
LME ○ LME-310FBL / LME-312FBL LR6-3M2LJBW ○ ○ ○ LHE-320AFB LR6-3M2WJBW ○ ×
φ60
LME-410FBL / LME-412FBL LR6-4M2LJBW ○ ○ LHE-420AFB LR6-4M2WJBW ○ ×
Does not comply with
Pole Mount LME-510FBL / LME-512FBL LR6-5M2LJBW ○ ○ LHE-520AFB LR6-5M2WJBW ○ ×
Low-voltage Directive 220V AC
(L-bracket) LME-110L / LME-112L LR6-1M2LJNW ○ ○ LHE-120A LR6-1M2WJNW ○ ×
(IEC/EN 60947-5-1, EN62471).
LME-210L / LME-212L LR6-2M2LJNW ○ ○ LHE-220A LR6-2M2WJNW ○ ×
× LME-310L / LME-312L LR6-3M2LJNW ○ ○ × LHE-320A LR6-3M2WJNW ○ ×
LME-410L / LME-412L LR6-4M2LJNW ○ ○ LHE-420A LR6-4M2WJNW ○ ×
LME-510L / LME-512L LR6-5M2LJNW ○ ○ LHE-520A LR6-5M2WJNW ○ ×
LME-120FBW / LME-123FBW LR6-1M2WJBW ○ × ○ LU7-02FB LR7-02WTNW Purchase LR7-BW additionally. ○ ×
24V DC
LME-220FBW / LME-223FBW LR6-2M2WJBW ○ × LU7 × LU7-02 LR7-02WTNW ○ ×
Direct Mount
○ LME-320FBW / LME-323FBW LR6-3M2WJBW ○ × φ70 ○ LU7-M2FB LR6-M2WJNW Purchase LR6-BW additionally for φ60 size. ○ ×
90 - 250V AC
LME-420FBW / LME-423FBW LR6-4M2WJBW ○ × × LU7-M2 LR6-M2WJNW Available for φ60 only. ○ ×
LME-520FBW / LME-523FBW LR6-5M2WJBW ○ ×
Direct Mount
LME-120W / LME-123W LR6-1M2WJNW ○ ×
LME-220W / LME-223W LR6-2M2WJNW ○ ×
× LME-320W / LME-323W LR6-3M2WJNW ○ × Direct-mount Models Mounting Pitch and Wiring Hole Position
LME-420W / LME-423W LR6-4M2WJNW ○ ×
LME-520W / LME-523W LR6-5M2WJNW ○ ×
Current Products New Products
LME-120FB / LME-123FB LR6-1M2PJBW ○ ○ LCE-(A) φ40 LE φ50 LES φ50 LU5 φ50 LR4 φ40 LR5 φ50
LME-220FB / LME-223FB LR6-2M2PJBW ○ ○ Mounting Buzzer Direction
Buzzer Direction
Mounting Buzzer Direction
○ Hole φ30 Wiring Hole Cord Exit Hole
LME-320FB / LME-323FB LR6-3M2PJBW ○ ○ Hole (φ8)
φ30 120° 120° Wiring
(3 - φ4) (3 - φ4) 30 (3 - φ4)
○ Exit Hole
LME-420FB / LME-423FB LR6-4M2PJBW ○ 120° 120° (φ12)
Pole Mount
10
220V AC / LME-520FB / LME-523FB LR6-5M2PJBW ○ ○ 120° 120°
(Circular-
230V AC mount LME-120 / LME-123 LR6-1M2PJNW ○ ○
Bracket) φ30
LME-220 / LME-223 LR6-2M2PJNW ○ ○
12.5
5
12.5
× LME-320 / LME-323 LR6-3M2PJNW ○ ○ M4 Hole Mounting
(2 - φ5) Hole
LME-420 / LME-423 LR6-4M2PJNW ○ ○ Cord Cord Exit Cord Exit (3 - φ4) φ30
Exit Hole Hole Body Hole
LME-520 / LME-523 LR6-5M2PJNW ○ ○ (φ12) (φ13) (φ13) Nameplate
Nameplate Nameplate Nameplate
LME-120FBL / LME-123FBL LR6-1M2LJBW ○ ○
LME-220FBL / LME-223FBL LR6-2M2LJBW ○ ○
○ LME-320FBL / LME-323FBL LR6-3M2LJBW ○ ○
Current Products New Products
LME-420FBL / LME-423FBL LR6-4M2LJBW ○ ○
Does not comply with LME φ60 LHE φ70 LU7 φ70 LR6 φ60 LR7 φ70
Pole Mount LME-520FBL / LME-523FBL LR6-5M2LJBW ○ ○
Low-voltage Directive Buzzer Direction Buzzer Direction Buzzer Direction
(L-bracket) LME-120L / LME-123L LR6-1M2LJNW ○ ○
(IEC/EN 60947-5-1, EN62471). Nameplate
LME-220L / LME-223L LR6-2M2LJNW ○ ○ 120° 120° Wire Exit
Hole
× LME-320L / LME-323L LR6-3M2LJNW ○ ○ 120° 120° 120° 120° 120° 120° (φ12)
LME-420L / LME-423L LR6-4M2LJNW ○ ○
LME-520L / LME-523L LR6-5M2LJNW ○ ○
φ40 φ40 φ40
13
6 - 17
Mounting Mounting
Hole Mounting Mounting
Hole Hole Hole φ40
(3 - φ5) Cord Exit Hole (φ18)※ (3 - φ5)
(3 - φ5) Cord Exit Hole (3 - φ5)
Cord Exit Hole (φ14)
(φ12) Nameplate Nameplate Nameplate
※ With Cable Gland (φ23)
21 22