Professional Documents
Culture Documents
Exercises
DISCLAIMER
© Ericsson AB 2011
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
3. How many in-built external alarms are there for RBS 6301 and RBS 6601?
_____________________________________________________
5. From the given figure, what units can be placed in the location? Fill in the
table.
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
3. Where are the cable inlets for BBS 6301 and PBC-05/BBS05 located?
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
2. What is the minimum distance between the RBS 6301 and the wall at the
back?
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
4. What is the proper way of tightening the GBF once installed on the floor?
_____________________________________________________
_____________________________________________________
1. With RRUS, what are the conditions to be used when the mounting bracket
is 90 mm?
_____________________________________________________
2. What are the two types of mounting bracket when RRUS is installed on a
pole or mast?
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
3. What are the two most common causes of fault of the fiber?
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
2. What is the torque value to tighten the mounting bracket to the back of the
cabinet when cabinet is installed with the back against the wall?
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________