Professional Documents
Culture Documents
POSCO Electrical Steel Catalogue PDF
POSCO Electrical Steel Catalogue PDF
electrical steel has superior electric and magnetic property and the demand for this steel has
stead-fastly increased with the heightened need of energy saving and use of clean energy to protect
environment of the globe.
Through consistent quality improvement, produces high quality electrical steel having low core
loss and high induction and is making every effort to supply customers with satisfactorily qualified
products.
Contents
MANUFACTURING PROCESS AND FACILITIES ∙ 4
MAIN USES ∙ 6
SURFACE INSULATION ∙ 20
PACKAGING/MARKING ∙ 26
MANUFACTURING
PROCESS AND FACILITIES
Grain-Oriented Non-Oriented The usage presented in this section reflects the general use and shall be used as a reference.
Please be sure to consult with our associates when making orders for specific usage.
PN-Core
PHD-Core PH-Core PG-Core 35PN210-35PN360 35PN440 50PN800- PNM-Core
50PN250-50PN400 50PN470-50PN700 50PN1300
Large rotating
● ●
machine
Medium rotating
Rotating Machines
● ●
machine
General use
● ●
AC motor
Hermetically
● ●
sealed motor
Small motor & Intermittent
● ●
Service AC motor
Large power
● ● ●
transformer
Medium & small
● ● ● ●
power transformer
Distribution
● ● ●
transformer
Reactor & magnetic
● ● ● ●
Static Machines
amplifier
Audio
● ● ● ● ● ●
transformer
Current & potential
● ● ● ●
transformer
Ballast ● ● ●
Welding
●
transformer
Magnetic
●
switch core
Surface Insulation
C-10 coating (ASTM C5) is applied.
Specification
Dimension & Shape Tolerance
Magnetic properties and lamination factors.
Thickness Thickness deviation in Width
Thickness Density Core Loss, Max w/kg Induction, Min T Lamination Width Thickness Camber (mm)
Grade Tolerance transverse direction Tolerance
(mm) (g/cm3) (w15/50) (B50) Factor (%) (mm) (mm) (length : 2 meter)
(mm) (mm) (mm)
35PN210 7.60 2.10 1.62 0.35 ±0.035 0.02 and under
35PN230 7.60 2.30 1.62 +1.5
1000 and under 0.50 ±0.040 0.03 and under
35PN250 7.60 2.50 1.62 0
0.65 ±0.052 0.04 and under
1.0 and under
35PN270 0.35 7.65 2.70 1.62 95.0 0.35 ±0.035 0.03 and under
35PN300 7.65 3.00 1.62 +1.5
1000 over 0.50 ±0.040 0.04 and under
35PN360 7.65 3.60 1.63 0
0.65 ±0.052 0.04 and under
35PN440 7.70 4.40 1.65
Note : The thickness deviation in width direction means the gap between the thickness of center and the one of part
<계 속> 15mm away from the edge.
Note : The above test is conducted in accordance to IEC404-2 (or JIS C 2550-2000), using as-sheared specimens Note : 1. Tests are conducted in accordance with IEC404-2 (or JIS C 2550-2000).
one half longitudinal and one half transverse to the rolling direction. 2. L : Specimens taken longitudinal to the rolling direction
2. C : Specimens taken transverse to the rolling direction
Surface Insulation
Generally, C-6B coating (organic + inorganic) is applied.
65PNM540 0.65 7.70 5.40 1.66 97.0 65PNM540 0.65 447 457 315 325 35 37 155
Note : The above test is conducted in accordance to IEC404-2 (or JIS C 2550-2000), using as-sheared specimens 70PNM500 0.70 495 505 370 380 32 34 175
one half longitudinal and one half transverse to the rolling direction.
Note : 1. Tests are conducted in accordance with IEC404-2 (or JIS C 2550-2000).
Note : 2. L : Specimens taken longitudinal to the rolling direction
Dimension & Shape Tolerance Note : 2. C : Specimens taken transverse to the rolling direction
Stressrelief annealing is a process that is carried out to acquire desired magnetic properties of electrical
Types and Features of Surface Insulation steel sheets by relieving stress generated in the process of shearing and punching at a proper
temperature for a certain period of time.
Coating Type C-10 C-6A C-9A C-9B
Grade GO NO
Annealing Temperature
Organic & inorganic Organic & inorganic Organic & inorganic
composition Inorganic If the annealing temperature is too low, it is difficult to acquire adequate magnetic properties and if the
combination combination combination
temperature is too high, it may erode surface insulation and degrade insulation properties. The
optimum annealing temperature for grain-oriented electrical steel is 780℃ to 840℃ and 750℃ to 800℃
Coating Thickness thick thin medium thick for non-oriented electrical steel for improved magnetism.
Note : 1) Please designate surface insulation according to usage. Regarding coating properties, please contact us. Furnace Atmosphere
Note : 2) C-9 Coating has extremely excellent insulation property.
Furnace atmosphere should be controlled to minimize carburization or oxidization which can diminish
magnetic properties. Therefore a pure nitrogen atmosphere is ideal and the dew point of gas should
be maintained as low as possible, below 0℃ is adequate. The oil used in shearing and punching
should be removed completely. Otherwise both sides of piled-up core will be damaged during the
annealing process, deteriorating the work capacity.
The product standards are subject to change. Please be sure to confirm the recent standards when
making orders or to consult our associates.
30PH100 1.00
30PH105 1.05 30P105 1.05 M105-30P 1.05
0.30 30PG110 1.10 30P110 1.10 M111-30P 1.11
(0.0118) 30PG120 1.20 30P120 1.20 M117-30P 1.17
30PG130 1.30 30G130 1.30
30PG140 1.40 30G140 1.40 30H083 1.83 M140-30S 1.40
Note : Inner diameter is 20inch (508mm) Note : The core loss of POSCO products is the maximum guarantee value at 1.7T and 50Hz.
50PN270 2.70 50A270 2.70 M270-50A 2.70 1 Gauss(G) 1 10-4 10-4 6.45
47F165 3.64
50PN290 2.90 50A290 2.90 M290-50A 2.90
1 Tesla(T) 104 1 1 6.45 x 104
47F180 3.97
50PN310 3.10 50A310 3.10 M310-50A 3.10
47F200 4.41 1 Weber per Square
Meter(Wb/m) 104 1 1 6.45 x 104
50PN350 3.50 50A350 3.50 M350-50A 3.50
0.35 47F210 4.63
50PN400 4.00 50A400 4.00 M400-50A 4.00 1 Line per Square
(0.0138) 47F240 5.29 1.55 x 10-1 1.55 x 10-5 1.55 x 10-5 1
Inch(Line/in)
50PN470 4.70 50A470 4.70 M470-50A 4.70
Note : The core loss of POSCO products is the maximum guarantee value at 1.5T and 50Hz. 1 Watt Per
2.204 1
Pound(W/lb)
PACKAGING
Standard packing for domestic sales Standard packing for export sales
MARKING
Domestic Export