Professional Documents
Culture Documents
10
11
12
13
14
15
16
10
11
12
13
14
15
5
6
10
11
12
13
14
15
Paradip Refinery
Fire & Safety Department
MEG Project M/s NRP PROJECTS (P) LTD. - LSTK-03, CT Site
Checklist
Temporary Ditribution Boards are in working condition & have suitable isolater switch with HRC
fuses and suitable glands. Main fuse rating is …..Amp
ELCB/RCCB(30mA Sensitivity) is connected in mains supply on temp board and tested for tripping
The extension board have industrial type switch sockets and plug only
Temporary distribution boards have been provided with canopy and stand
Name of contractor is marked/painted on each temporary supply baord along with contact nos
Wooden structure not acceptable. Only MS/Metal Structure with minimum height of incoming and
all outgoing feeders from ground level of 1.5 ft is acceptable
Availability of Extinguisher
Stencilling/marking of Incoming source & outgoing devices done on Distribution Board/ Panel
Checklist
ELCB/RCCB(30mA Sensitivity) is connected in mains supply on temp board and tested for tripping
The extension board have industrial type switch sockets and plug only
Temporary distribution boards have been provided with canopy and stand
Name of contractor is marked/painted on each temporary supply baord along with contact nos
Wooden structure not acceptable. Only MS/Metal Structure with minimum height of incoming and
all outgoing feeders from ground level of 1.5 ft is acceptable
Availability of Extinguisher
Stencilling/marking of Incoming source & outgoing devices done on Distribution Board/ Panel
Checklist
ELCB/RCCB(30mA Sensitivity) is connected in mains supply on temp board and tested for tripping
The extension board have industrial type switch sockets and plug only
Temporary distribution boards have been provided with canopy and stand
No scrap/unwanted objetcs are placed in/on the temporaray distribution boards
Name of contractor is marked/painted on each temporary supply baord along with contact nos
Wooden structure not acceptable. Only MS/Metal Structure with minimum height of incoming and
all outgoing feeders from ground level of 1.5 ft is acceptable
Availability of Extinguisher
Stencilling/marking of Incoming source & outgoing devices done on Distribution Board/ Panel
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes*
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes