This document provides a hazard identification and risk assessment for cleaning cranes at a port terminal. The key hazards identified include falls of persons or materials from height during cleaning. Control measures to address these risks include testing lifting tools and tackles, restricting high elevation work during bad weather, using valid work permits, conducting toolbox meetings, and wearing all necessary PPE. The overall risk rating for this work is 6, which is considered a moderate risk requiring additional legal compliance and controls.
This document provides a hazard identification and risk assessment for cleaning cranes at a port terminal. The key hazards identified include falls of persons or materials from height during cleaning. Control measures to address these risks include testing lifting tools and tackles, restricting high elevation work during bad weather, using valid work permits, conducting toolbox meetings, and wearing all necessary PPE. The overall risk rating for this work is 6, which is considered a moderate risk requiring additional legal compliance and controls.
This document provides a hazard identification and risk assessment for cleaning cranes at a port terminal. The key hazards identified include falls of persons or materials from height during cleaning. Control measures to address these risks include testing lifting tools and tackles, restricting high elevation work during bad weather, using valid work permits, conducting toolbox meetings, and wearing all necessary PPE. The overall risk rating for this work is 6, which is considered a moderate risk requiring additional legal compliance and controls.
Type of Harm Risk Assessment Work Type of Damage / Sl. No. R / NR Consequence Control Measures Injury / ill Probabil Activity Hazard Loss of Health ity property REV-0 Cleaning of Cranes at Port EBTL/ R Fall of Personal injury All lifting tools and tackles (Wire rope, Pully, Man Y Y 2 HAZ/ Person Property baskets) are tested by a competent person. HIRA/ Fall of Damage works in the high elevation is restricted.(heavy rain, 038 Material wind) Work will be carried out with valid work permit only. Cleaning activity will be carried out only during day time. Tool box meeting conducted before start of job. Adequate supervisory surveillance is ensured during course of work. Required water pressure only to be used while cleaning with water jet. Workers will be away from the operational part of the crane. Keep away from the electrical equipments/panels. Water /detergents should not spray on electrical equipments and motors. All Necessery PPE's are worn by all workmen at all time. Work is carried out only in the prescribe area were work permit are issued. DATE: 09/07/2012 Risk Assessment Legal Additional Total Risk Complia Control severity Rating Code nce measures 3 6 B THE Full body DOCK harness WORKE provided. RS Strict (SAFET implementati Y, on of work HEALT permit H AND system. WELFA RE) ACT, 1986 (Act No. 54 of 1986)