Professional Documents
Culture Documents
Technical Specifications
Outdoor
Compressor Heat exchanger Dimension
Fan
Ref Model Heating Rated Rated Max. Max. Volts Noise Operating
Water Water Pressure
To Capacity Input Amps Input Amps Phase Refrigerant Level Weight
Type No. No. Conn. Flow Drop Length Width Height
Pic kW kW A kW A Hertz dB(A) kg
BSP Rate mm mm mm
3
mm m /h kPa
TRT-7 7.0 1.7 8.0 2.6 11.8 220-240/1/50 R-417A Rotary 1 1 20 4 22 53 64 567 503 783
1 TRT-10 9.5 2.3 10.9 3.6 16.5 220-240/1/50 R-417A Rotary 1 1 25 6 25 56 110 710 710 908
TRT-18 17.9 4.5 8.8 6.9 13.5 380-415/3/50 R-417A Scroll 1 1 40 8 27 58 145 810 810 975
TRT-35 35.0 8.9 17.6 12.8 25.5 380-415/3/50 R-417A Scroll 2 2 40 10 32 62 293 1450 705 1290
2
TRT-40 40.7 10.5 19.8 13.8 26.2 380-415/3/50 R-417A Scroll 2 2 40 10 32 62 325 1450 705 1290
3 TRT-75 74.4 19.1 39.5 25.0 46.0 380-415/3/50 R-417A Scroll 2 2 65 25 40 72 650 2000 1100 1980
Note:
• Preset water temperature: 55°C
• Maximum water temperature: 60°C
• Maximum working pressure (water side): 3.0 MPa
• Testing conditions: ambient temperature: dry bulb:20°C, wet bulb:15°C, water temperature raised 15°C to 55°C
• Ambient temperature operation range: -7 to 43°C
Picture 1 Picture 2
Thermatrac residential air-to-water heat pump water heater
Standard features:
1. Absorbs environmental heat and transfers it to the water, at the same time cold air can be delivered to the space
(kitchen, basement, garage, etc.) through duct
2. One-piece design c/w rotary compressor, user-friendly LCD controller for easy interaction
3. Stainless steel jacket
4. Floor mounted
5. SS304 water tank, durable and corrosion resistant
6. Efficient heat exchanger (Ni-Ti alloy SS321) inside tank, efficient heat transfer
7. Heating element: 2 kW x 220 Volt
8. Pressure relief valve
Thermatrac
HOT WATER STORAGE TANKS
MAINS PRESSURE
2000 TO 5000 LITRES
For larger tanks contact factory
STANDARD FEATURES
• SUS316L tank material
• 0.6MPa maximum working pressure
• Flanged Manhole
• Flanged water connecons (DIN standard)
• Li�ing lugs
• Angle legs
• Drain
• Pressure relief valve
OPTION:
• 1.0MPa maximum working pressure
SUS316L tank : 1.0MPa Mild steel tank with co pper lini ng: 1.0MPa
Max. Max. Copper
Mild steel
capacity Working thickness material capacity Working sheet
thickness
pressure pressure thickness
3 3
2m 1.0MPa 6mm SUS316L 2m 1.0MPa 8mm 1mm
Note:
Leg material: SUS304