The required components are Raspberry Pi, LED, sensors,
motor, few wires to make connection. Testing will be done twice of each component. First of all, the wires will be checked individually so that the faulty ones will be removed at the initial stage only. Similarly, the motor will be also tested. Components like Raspberry Pi and SK200 (Device used to check the fertility of soil) need to be tested completely different. SK200 specially needs to be tested multiple times in order to get correct readings. Similarly, Raspberry Pi needs to be tested more than once. It doesn’t matter by which method it is tested, but it needs to be checked. Whether it be a simple light blinking program or a big project. Checking the device performing well is what is needed. Finally, all the devices will be tested together and then the project can be performed!