Professional Documents
Culture Documents
Ground Settlement and Subsidence
Ground Settlement and Subsidence
In
geotechnical engineering , settlement is defined as the vertical movement of the ground,
generally caused be changes in stresses within the earth. Subsidence is a term often
used to described ‘caving in’ or sinking of the ground, that may not be associated within
changes in soil stresses. Excessive settlement or subsidence can lead to distortion and
damage to structures, services and infrastructure that are founded on the material
subject to the movement. The settlement can be almost instantaneous or can take
years or decades to occur, depending on the underlying soil conditions and cause of the
movement.
Settlement is most likely to occur when increased vertical stresses are applied to the
ground on or above soft or loose soil strata. It is also possible that lowering the ground
water, migration of soil fines, deep voids, underground excavation for tunnels, induced
ground vibrations and seismic events will cause significant settlement.
In areas of deep soft, recently deposited, clayey strata there is a significant risk of short-
medium term consolidation settlement, associated with any increase if vertical effective
stress, as well as long term secondary, or creep, settlement that can occur without the
application of increased vertical stresses. It must also be remembered that, if the depth
of soft or loose material varies significantly in plan location, such as where recent paleo-
channels are encountered, there will be significant differential settlements at the surface
and associated lateral ground movements.