Professional Documents
Culture Documents
Irjet V7i5524 PDF
Irjet V7i5524 PDF
© 2020, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 2739
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 05 | May 2020 www.irjet.net p-ISSN: 2395-0072
4.2 Principle
3 Pulley - 2
© 2020, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 2740
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 05 | May 2020 www.irjet.net p-ISSN: 2395-0072
5. CALCULATIONS C=225mm
Nominal pitch length:
AC MOTOR
L= 2C + Π/2 (d+d) + ((d-d)2)/(4c)
VOLT : 230V A.C L= 965.64mm
RPM : 1440 RPM For the nominal inside length and a section. The next
standard pitch length is selected as 1001mm (selected from
CURRENT : 2.5A
PSG DB pg no 7.59)
PHASE : 1 PHASE
Length correction factor:
PNEUMATIC CYLINDER Fc=0.88 (selected from PSG DB pg no 7.59)
SIZE : DIA -45MM Correction factor for arc of contact
STROCK LENGTH : 100mm Arc of contact = 180° – ((D-d)/C)*60°
MATERIAL : ALUMINIUM / M.S = 180° – ((250-50)/225)*60°
© 2020, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 2741
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 05 | May 2020 www.irjet.net p-ISSN: 2395-0072
B = (D-d)2/8 = 5000 This machine will provide more efficient work and also
cheaply available which also reduces the work stress and
Cactual = 132.44+ √ ((132.442)+5000))
labour cost. It can save sufficient of time for the worker which
Cactual = 244.44mm increases the production rate.
Volume of pulp slurry = mass/density REFERENCES
Mass = 0.5kg
[1] Wahistrom, P.I. 1970. Paper Machine, Pulp and Paper
Density = 1.201kg/m3 Technology 2nd ed. Litton Educational Publishers.
[2] Young J.H. 1980. Fibre Preparation, Pulp and Paper
Chemistry and Chemical Technology 3rd ed. Vol
Volume = 0.5/1.201 [3] Gitesh D.Kapse, Nitesh T. Chandekar, et-all (2016),
Fabrication of recycling machine, International Journal
Volume = 0.416m3 for Scientific Research & Development| Vol. 4, Issue 02.
II, John Wiley and Sons
Pneumatic cylinder
[4] Fundamentals of Paper Drying-Theory and Application
Force Calculation: by Ajit K Ghosh
[5] International Research Journal of Engineering and
Force to be exerted is 5bar Technology (IRJET)
Pressure in the cylinder = 0.5*105 N/m2 [6] PSG Design Data Book - Design Of Machine Elements
Area of the piston = Force/Pressure
BIOGRAPHIES
= 50/50000
= 0.001m2
S.Premkumar.,M.E.,
Bore dia = 0.0356m = 35.6mm
Assistant Professor,
Department of Mechanical Engineering,
6. ADVANTAGES KGiSL Institute of Technology.
Handling is easy.
Manual power not required. M.Sanjay,
Repairing is easy. B.E Mechanical Engineering,
KGiSL Institute of Technology.
Replacement of parts is easy.
The involvement of manual work is highly
negligible.
Simple in construction. S.Raghul Prasath,
B.E Mechanical Engineering,
Easy to fabricate.
KGiSL Institute of Technology.
No need of skilled operators to operate this
system.
CONCLUSIONS
N.Vinith,
The suggestion of process of paper recycling helps to B.E Mechanical Engineering,
reduce the paper waste and save environment. The paper is KGiSL Institute of Technology.
getting recycled and the cost is getting reduced.
We are proud that we have completed the work with the
limited time successfully. The “Paper recycling machine” is
working with satisfactory conditions. We are able to
understand the difficulties in maintaining the tolerances and J.Sridhar,
also quality. B.E Mechanical Engineering,
KGiSL Institute of Technology.
As discussed in future works the device can be automated
and can be used for may purposes.
© 2020, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 2742