Professional Documents
Culture Documents
There are times that one will have to reset the Xiaomi TV to its factory default settings,
particularly after one has installed too many APKs, clogging up the system memory, making the
TV to perform in a strange manner. This factory reset may be required for new Xiaomi TV in
order for the remote controller to be used.
This article will try to describe how one can reset the Xiaomi TV to its factory settings.
Whats Needed?
a Soft Reset
b. Hard Reset
Disconnect the electricity supply to the TV and wait for about 20 seconds for TV to discharge all
stored values. Press and hold the “Home” and “Manual” buttons firmly with fingers of one hand
while using the other hand or get someone to reconnect the plug of power supply. The TV
should start; if not, press the big white button located just under the "Mi" symbol, underneath
the centre of the TV
On successful start up, the following recovery screen will pop up. Quickly release the "confirm"
and "Restore" buttons when this recovery screen appears.
b) The Recovery Selections
In here, there are 4 selection
1. Reboot: When you want to reboot the TV after wiping the data and cache
2. Wipe Cache: This is where one will want to clean the cache
3. Wipe User Data: This is where all the newly installed APKs will be wiped out
4. Wipe All Data : This is where a factory reset will be performed to wipe out all the cache and
data and restore the TV to its factory settings
Important Note:
If one have rooted the TV before, it will not be advisable to select option 4 to “Wipe All Data”
because the process will wipe out all including also the rooted files, making the TV
unusable. Some users advised not to use this option 4 altogether.
c) Reboot the TV
3. Factory Reset for New Xiaomi TV
New Xiaomi TV may need a factory reset so that the remote controller can be used.
1. Perform the hard reset as described above
2. Select “Restore System”as shown
Reference: