Professional Documents
Culture Documents
AASISH VUYYAPU(17113001)
Blank Quiz
B.Tech MCQ-I Test (CRE-II) 7th Semester
* Required
1. Email address *
aasishvuyyapu@gmail.com
2. Chemisorption studies are useful in the determination of catalyst surface area and
pore size distribution in
3.A catalyst increases the potential energy barrier over which the reactants must pass
to form products
https://docs.google.com/forms/d/1DFGXUY2Q2AH8fM-NjXR55AAtXF9tWT_qh0SGSoeG1RA/edit 1/5
10/14/2020 Blank Quiz
7. The Single parameter model proposed for describing non-ideal flow is the
model *
1. None of these
2 Dispersion
3. Tank in series
4. Dispersion with chemical reaction
https://docs.google.com/forms/d/1DFGXUY2Q2AH8fM-NjXR55AAtXF9tWT_qh0SGSoeG1RA/edit 2/5
10/14/2020 Blank Quiz
8. The reactor contains dividing baffles is used to carry the reactions of (A->R), - 5 points
rA = 0.05 CA mol/(l.min). Pulse experiment results are given below. The
conversion for Plug flow, mixed flow reactor & tanks in series model will be: *
2 points
9. The dispersed noncoalescing droplets (CAo = 2 mol/l) react as they pass
through a contactor. The reaction kinetics and stoichiometry are: A->Rm -
rA = 0.5 [l/(mol.min)] C2A. (i.e. CA square). The average concentration of A
remaining in the droplets leaving the contactor and mean conversion are: *
https://docs.google.com/forms/d/1DFGXUY2Q2AH8fM-NjXR55AAtXF9tWT_qh0SGSoeG1RA/edit 3/5
10/14/2020 Blank Quiz
10. Where gas will act as macro fluid & liquid act 1 point
microfluidic
2. Spray tower
3. Distillation Column
4.Fluidized Bed Reactors
11. For identical feed composition, flow rate, conversion and for all positive 1 point
reaction orders, the ratio of volumes of the mixed reactor to the plug flow
reactor is *
1.always one
12. With the same reaction time, initial concentration and feed rate, the 1 point
reaction of A & B is carried out separately in CSTR and P.F. reactor of equal
volumes. Then conversion will be: *
https://docs.google.com/forms/d/1DFGXUY2Q2AH8fM-NjXR55AAtXF9tWT_qh0SGSoeG1RA/edit 4/5