The document discusses an automatic hand brake release system for vehicles. The system uses a DC motor that is motorized and controlled by a control unit. When the key is switched to the ON position, the DC motor rotates forward for 2 seconds to release the brakes. When the key is switched to the OFF position, the DC motor rotates in reverse for 2 seconds to apply the brakes. The system automatically releases and applies the hand brake based on the key switch position.
The document discusses an automatic hand brake release system for vehicles. The system uses a DC motor that is motorized and controlled by a control unit. When the key is switched to the ON position, the DC motor rotates forward for 2 seconds to release the brakes. When the key is switched to the OFF position, the DC motor rotates in reverse for 2 seconds to apply the brakes. The system automatically releases and applies the hand brake based on the key switch position.
The document discusses an automatic hand brake release system for vehicles. The system uses a DC motor that is motorized and controlled by a control unit. When the key is switched to the ON position, the DC motor rotates forward for 2 seconds to release the brakes. When the key is switched to the OFF position, the DC motor rotates in reverse for 2 seconds to apply the brakes. The system automatically releases and applies the hand brake based on the key switch position.
“AUTOMATIC HAND BREAK RELEASE” is nothing but one of the breaking systems in automobile at the time of vehicle switch off condition. In this breaking system motorized operated one. In this project, the control unit is received the signal from the key switch. The key switch is ‘ON’ at the time of vehicle start condition, that the D C motor is rotating in forward direction for 2 sec to release the break (Already wheel is on braking condition). The key switch is ‘OFF’ the D C motor is rotating in reward direction for 2 sec to applying the break.