You are on page 1of 35

VIKING Product Documentation

Table of Contents
Product No Specification Quantity Page

1027490 LTX Fire Helmet, Red (Bullard) 1 2-3

PS8400 Economy Basic 1 4 - 13

PS8450 Economy Basic 1 14 - 20

10179xx Fire Protective Gloves (Art. 61104) 1 21 - 28

S-5260360xx Fireman boots 1 29 - 35

DATE: 30-01-2020
VIKING Product Documentation

LTX Fire Helmet, Red (Bullard)


Material no.: 1027490

Bullard is a leading manufacturer of high quality personal protective equipment and systems that are
marketed worldwide. Durability, comfort, safety, quality and innovation are hallmarks of every Bullard product
line.

AKH-FFS-172 1027490 Page 2


February 14, 2012

Mr. Wayne Ruggles


E. D. Bullard Company
1898 Safety Way
Cynthiana, KY 41031-9303

Certification Letter

Dear Mr. Ruggles:

We are pleased to confirm that the Structural Fire Fighting Helmet models below are certified by the
Safety Equipment Institute, effective February 14, 2012. Annual certification testing was successfully
completed on January 17, 2012 in accordance with the requirements of NFPA 1971-2007, Standard on
Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting.

SEI Ref. No. Brand Model No.

FF BUL 01 Standard Helmet - LT LT - Standard Helmet

The SEI Certification Mark may be used in the marketing, packaging and promotion of the model detailed
above, in accordance with the provisions of the SEI Certification Program Manual.

Per the SEI Certification Program Manual, SEI shall certify the manufacturer's product model(s) and
grant the right to use the SEI certification mark when 1) the Testing Laboratory has determined that the
product model submitted and tested successfully meets the appropriate product standard, 2) the Quality
Assurance Auditor has determined that the manufacturer complies with SEI quality assurance
requirements through an on-site audit, including a review of the quality manual and procedures, 3) the
manufacturer has paid all fees, and 4) product liability insurance requirements are met.

Following initial certification, SEI conducts annual follow-up testing on samples which are selected by
SEI during the annual quality assurance audit. SEI’s certification program is accredited as a System Type
5 per ISO/IEC Guide 67:2004(E).

Thank you for your participation in the SEI Certification Program. If you have any questions, please
contact the SEI Office.

Sincerely,

Stephen R. Sanders Patricia A. Gleason


Technical Director President

cc: Mr. Kevin Warren, SEI Auditor

Safety Equipment Institute


1307 Dolley Madison Blvd. Suite 3A McLean, Virginia 22101
Tel: 703/442-5732 FAX: 703/442-5756
www.SEInet.org
0241

AKH-FFS-172 1027490 Page 3


VIKING Product Documentation

Economy Basic
Material no.: PS8400

PAGE 1

AKH-FFS-172 PS8400 Page 4


&DANAK FORCE
PROD Reg. nr. 7020 Certification

EC Type-Examination (Module B)
Directive for Marine EquiPment
Ceftificate No.: O20O-MarED-O3927 version 3
Issued by FORCE Ceftification A/S - EC-notified body number 0200
This is to certiff that:
FORCE Ce¡tification A/S did undertake the relevant type approval procedures for the equipment identified
below which was found to be in compliance with the Fire protection requirements of Marine Equipment
Directive (MED) 20L4l90lEU, last amended by Regulation (EU) 2OtBl773 subject to any conditions in the
schedule attached hereto.
Applicant and Manufacturer: Viking Life-Saving Equipment A/S
Sædding Ringvej
671O Esbjerg V
Identification of Marine Equipment:
Product Type: Fire Protection Equipment
Item: MED/3.3 Fire-fighter's outfit
Product Designation: PS65)cA Fire fighter suit
PS65uC Fire fighter suit
PS84n Fire fighter suit
Specified Standard: EN 469:2OO5+41:2OO6/AC:2OO6
The examined samples were found to fulfill the requirements of the applicable reg. SOI-AS 74 as amended,
and as specified in Regulation (EU) 20L81773, item MED/3.3. Documentation for observance of relevant
requirements stated in ANNEX II (Module B) of the Directive and the provisions of IMO Res. MSC 98(73)
- (fss Code) 3, together with the basis for the type examination are described in the appendix to this
ceftificate,
This certificate will remain valid unless cancelled or revoked, provided the conditions in the attached
appendix are complied with and the equipment remains satisfactory in service, The certifìcate will not be
valid if the manufacturer makes any changes or modifications to the approved equipment, which have not
been notified to, and agreed with the notified body named on this certificate.
Should the specified regulations or standards be amended during the validity of this ceftificate, the
product(s) is/are to be reapproved prior to itlthey being placed on board vessels to which the amended
regulations or standards apply.
This is an update of EC-Type Examination Certificate DK-0200-MarEd-O3927 version 2 due to addition of
a new model. Existing products conforming to the previous ceftificate are still valid.

FORCE Ceftification A/S task No.: 118-3437U ID. No. 05596

Date of issue: 2019-03-12


Date of expiry: 2024-O3-L2

Kasper unk Eliasen


Certification manager Examiner
The Mark of Conformity may only be affixed to the above type
approved equipment and a Manufacturer's Declaration of Conformity
may only be issued when the production/product assessment module
(D, E or F), ANNÐ( II of the Directive is fully complied with and
controlled by a written inspection agreement with a notified body.

Extracts from this EC Type-Examination Cedificate may only be reproduced with a written permission from FORCE Certification A/S
FORCE Ceftification A/S - Park Allé 345,2605 Brøndby, Denmark - T: +45 43250L77 - Fax: +45 43250010 - info@forcecertification.com

AKH-FFS-172 PS8400 Page 5


Appendix to EC Type-Examination Ceftificate FORCE
Directive for Marine Equipment
Certification
Certificate No.: 0200-MarED-03927 version 3
Issued by FORCE Certifìcation A/S - EC-notified body number 0200 Page 1 of 5

Applicant and Manufacturer: Viking Life-Saving Equipment A/S


Sædding Ringvej
6710 Esbjerg V
Identification of Marine Equipment:
Product Type: Fire Protection Equipment
Item: MED/3.3 Fire-fighter's outfìt
Product Designation: PS65)od Fire fìghter suit
PS65>xC Fire fighter suit
PSB4rc< Fire fighter suit
Suit consisting of jacket and trousers, or a coverall.
Jacket and trousers must be worn at the same time to attain protection

Design

Jacket styla J1

---
-t-
Jacket style J2

AKH-FFS-172 PS8400 Page 6


Appendix to EC Type-Examination Ceftificate
Directive for Marine Equipment
FORCE å=
Certification ê---
Certificate No.: 0200-MarED-03927 version 3 --
Issued by FORCE Certification A/S - EC-notified body number 0200 Page 2 of 5

Design (continued):
Trousers style T1

¡- ¡I¡I
r-F IE lrl'
-

- -
Trousers slyle T2

I
-
=

E rE
IE G
- T
Stvle Tvpe of layer Comoonent assemblv
Outer fabric Nomex Nxt 195 grlm2
P56s)o<A Thermal barrier Ibena aramide fleece 175 grlm2
Inner liner Nomex/Viscose 125 qrlmz
Outer fabric Aramide I0Oo/o 220 grlmz
PS65n<C Thermal barrier Ibena aramide fleece I75 grlmz
Inner liner Nomex/Viscose 125 qrlm2
Outer fabric Aramide L}Oo/o 220 grlmz
PSB4>x Moisture barrier TopazPlJ L45 grlmz
Ibena aramide fleece 175 grlmz Ibena aramide fleece I75 grlmz
Nomex/Viscose 125 grlm2 Nomex/Viscose 125 qrlm2

AKH-FFS-172 PS8400 Page 7


Appendix to EC Type-Examination Ceftificate FORCE
Directive for Marine Equipment
Certification
Certificate No.: 0200-MarED-03927 version 3
Issued by FORCE Certification A/S - EC-notified body number 0200 Page 3 of 5

History:

Issue/chanoe: Document: Date:


- Original certificate DK-0200-F,068 2004-08-10
- Alternative outer fabric, lining and 1st Supplement to appendix 2007-04-16
thermal barrier combination
- Alternative outer fabric, lining and DK-O200-MarED-068 version 1 2008-06-02
thermal barrier combination and new
certificate identification No,
- General designation PS65)C( DK-0200-MarED-068 version 2 2008-07-15
- Updating of materials, new expiry date DK-0200-MarED-068 version 3 20rr-07-22
- New Notified Body DNV - GL 0098, 60 707 - 13 HH 2015-12-02
new certificate No.
- New Notified Body FORCE Certification 0200-MarED-03927 version 1 2018-06-27
A/S 0200
- Update of amendment 0200-MarED-03927 version 2 2018-08-10
- Revision and new model PS84rc< 0200-MarED-03927 version 3 2019-03-12

Ma n ufactu rer/ Su b-su Þp I ier:


Manufacturer: Viking Life-Saving Equipment A/S
Sædding Ringvej
6710 Esbjerg V
Place(s) of production Omelia
4960 Rudozem, Region Smolian
Bulgaria

Viking Life-Saving Equipment


LAEM CHABANG INDUSTRIAL ESTATE
20230 THAILAND

AKH-FFS-172 PS8400 Page 8


Appendix to EC Type-Examination Ceftificate
Directive for Marine Equipment
FORCE
Certification
+=
€---
Certificate No.: 0200-MarED-03927 version 3
Issued by FORCE Certification A/S - EC-notified body number 0200 Page 4 of 5

Documentation for observance of the relevant requirements in


EN 469: 2005+41: 2006/AC: 2OO6:
Repofts covering Reports covering
Clause: assembly PS65)od assembly PS65xxC/PSB4>o<:
6.1 Flame spread Aitex 2015001604 cB s888s/B
cB 16.05546.01
cB 13.0676,01
cB 16.04896,01
cB 18.00079.01
cB 18.00079,02
cB 18.00079.03
c87067 0lB
6.2 Heat transfer, flame cB 16.0ss46,01 cB70670lB
cB 16,04550.1
6.3 Heat transfer, radiation cB 16.04664.01 cB72t97lD
cB 70670/N
6.4 Residual tensile strenqth Aitex 2015CO0981 cB 79668/D
6.5 Heat resistance Aitex 2015CO0981 CB 5BBB5
cB 16.04896,01 sTFr 2016 0778
cB 18.00079.01 Hohenstein 13.0.21313
cB 18.00079.02
cB 18,00079.03
6.6 Tensile strength(s) Aitex 2015CO0981 CB 5BBB5
cB 15.02671.01
6.7 Ïear strenqth Aitex 2015CO0981 CB 58885
6.8 Surface wetting Aitex 2015CO0981 CB 58885
cB 2LZ20|C
6.9 Dimensional change Aitex 2015CO0981 CB 58885
cB 16.05546.01
Hohenstein 13.0.21313
6.10 Liquid chemicals cB 16.05885.01 cB sBBBs/C
STFI 2016 1B3O
6.11 Water penetration FT 118-23052.a cB 16.06460,01
6.12 Water vapour cB 16.04664.01 cB 13.01844.0s
cB 72L79lD
6.13 Erqonomics FT 118-23052.b FT 118-23052.b
6.14 Visibility FT 118-23052.a FT 118-23052.a
FroH 354276401 FroH 3s4276A01
FIOH 330987A01 FroH 330987A01
FIOH 300432A01 FroH 300432A01
FIOH 24L74LAOI FIOH 24L74tA0t
6.15 whole qarment (optional) Dupont E 20I6tLlB 2924 n.a

CB = Centexbel; FT = FORCE Technology

Partial conclusion: The examined samples are found to fulfil the requirements in the applicable reg
SOLAS 74, as amended, and the InternationalTesting Standard
EN 469:2005+A1:2006/AC:2006 referred to in MED/3.3 as well as the
requirements in ANNEX II, Module B of the directive.

AKH-FFS-172 PS8400 Page 9


Appendix to EC Type-Examination Ceftificate FORCE
Directive for Marine Equipment
Certification
Certificate No,: 0200-MarED-03927 version 3
Issued by FORCE Certification A/S - EC-notified body number 0200 Page 5 of 5

The following documentatíon was available:


"Technical specification, Fire fighter garment in acc. with EN 469:2005+AI:2006" dated 2018-12-12

List of materials/manufacturers used for See "Líst of Materials for DK-0200-MarED-03972"


manufacturing the device: valid on the date of production,

Conclusion
Based on the above-mentioned attestatíon it can be concluded that the fire fighter outfit designated
PS65)od, PS65>uC, and PSB4rc<, meet the conditions of EC type-examination in accordance with the
Marine Equipment Directive (MED) 20l4l90lE9 last amended by Regulation (EU) 20L81773.

FORCE Ceftification A/S task No.: 118-34371

Date: 2019-03-12

V*q^ ll (^-
Kaspfr Munk Eliasen
Examiner

AKH-FFS-172 PS8400 Page 10


É DANAK
PROD R€9. nr.7020
FORCE
Certification

EC Quality System (Module D) Cettificate


Directive for Marine Equipment

Certificate No.: O2OO-MarED-02213 ver 11


Issued by FORCE Ceftification A/S - EC-notified body number 0200

This is to certiff that:


FORCE Certification A/S d¡d undeftake the relevant quality assessment procedures for the equipment of the
manufacturer identified below which was found to be in compliance with the Life Saving Appliance and Fire
Protection requirements of Marine Equipment Directive (MED) 2OL4l90lEU, as amended, last amended by
Regulation (EU) 2019/1397, and with the type described in the EC Type Examination Ceftificates (Module B)
listed in the Attachment to this Ceftificate, subject to any conditions in the schedule attached hereto.

The manufacturer: Viking Life-Saving Equipment A/S


Sædding Ringvej 13
6710 Esbjerg V
maintains and applies a quality system in accordance with the requirements of the Maritime Equipment
Directive Annex B, Module D.
Scope:
Item MED/1.4 Lifejacket
Item MED/1.5a Immersion suits and anti-exposure suits 1(Immersion suit without inherently insulation)
Item MED/1.5b Immersion suits and anti-exposure suits 1 (Immersion suit with inherently insulation)
Item MED/1.5c Immersion suits and anti-exposure suits 1 (anti-exposure suit)
Item MED/1.6a Immersion suits and anti-exposure suits 2 (Immersion suit without inherently insulation)
Item MED/1.6b Immersion suits and anti-exposure suits 2 (Immersion suit with inherently insulation)
Item MED/1.6c Immersion suits and anti-exposure suits 2 (anti-exposure suit)
Item MED/3.3 Fi re-fighter's outfit: protective clothi ng

Item MED/3.5 Fire-fighter's outfit: gloves

Note: 1) tusigned to be worn in conjunction with a lifejacket


2) tusigned to be worn in conjunct¡on without a lifejacket

This cetificate remains valid unless cancelled, expired or revoked

This ceftificate authorises the manufacturer or his authorised representative established within the Community
in conjunction with the EC TYPE EXAMINATON (MODULE B) CERIFICATE of the equipment listed in the
scope to affix the "Mark of Conformity" (wheelmark).
This certifrate loses its ualidity if the manufacturer makes any changes or modifrcations to the approved quality system, which have not
been notifred tq and agreed with the notifred body named on this certifiate and/or afrer lapse of time, withdrawal or evocat¡on of the EC
Type Examination (Module B) Cert¡ficate.
This new vercion of existing certifræte Dk-0200-MarED-02213 ver lQ dated 2019-12-12 is issued due to
conection of reference to wrong amendment
FORCE Ceftification A/S task No.: 119-37184, FC ID No. 07793
This ceftificate consists of 3 pages.

Date of issue: 2019-12-18


Date of expiry: 2022-03-L3

Jensen
FORCE A/S, Ceftification Manager

tr o2oo/YYYY
0200: Number of the Notified Body responsible for quality surveillance module
YYYY: Last two dig¡ts of the year in which the mark is affixed.

Extracts from this EC Type-Examination Certificate may only be reproduced with a written permission from FORCE Cert¡ficat¡on A/S

FORCE Certification Á'/S ' Park Allé 345 ' 2605 Brøndby ' Denmark ' Tel +45 43 25 01 77' Fax +45 43 25 00 10' cert@force-cert.dk ' www.force-cert.dk

AKH-FFS-172 PS8400 Page 11


Annex to
EC Quality System Module D Ceftificate FORCE
Directive for Marine Equipment Certification
Certificate No.: 0200-MarED-02213 ver 11
Issued by FORCE Certification A/S - EC-notified body number 0200 Page 1 of 2

Module B data
Descrþtion: ftem: Type examination Date of issue: Ilotified Body:
certifrcate id:
PV9313 MED/1.4 DK-0200-MarED-03907 08-03-2018 FORCE Certification
PV93L7 MED/1.4 DK-0200-MarED-185 07-09-20t6 FORCE Certification
PVg319 MEDIT.4 DK-0200-MarED-168 L7-03-2017 FORCE Certification
PVg320 MED/1.4 DK-0200-MarED-03905 08-03-2018 FORCE Certifìcation
PV9340 MED/1.4 0200-MarED-07262 26-09-2019 FORCE Certifìcation
PV9341 MED/1.4 0200-MarED-06195 04-04-20t9 FORCE Ceftification
PV9342 MED/1.4 DK-0200-MarED-03259 23-rt-20t7 FORCE Certification
PVg360 MED/1.4 DK-0200-MarED-03906 08-03-2018 FORCE Ceftification
PVg361 MED/1.4 DK-0200-MarED-03904 08-03-2018 FORCE Certification
PV9419 MED/1.4 DK-0200-MarED-195 t3-03-20t7 FORCE Ceftification
PVg506 MED/1.4 DK-0200-MarED-01073 04-10-2016 FORCE Ceftification
PV95OB MEDIT.4 DK-0200-MarED-01074 04-10-2016 FORCE Certification
PV9516 MEDIL.4 DK-0200-MarED-OI77O 20-t2-20r7 FORCE Certifìcation
PVg518 MED/1.4 DK-0200-MarED-01649 20-r2-20r7 FORCE Cedification
PVg520 MED/1.4 DK-0200-MarED-01075 04-10-2016 FORCE Ceftification
PVg521 MED/1.4 14 511 - 15 HH 30-06-201s DNV/GL
PV9s22 MED/1.4 DK-0200-MarED-01378 20-t2-20t7 FORCE Certification
PVg530 MED/1.4 DK-0200-MarED-03284 27-rr-20r7 FORCE Certification
PV9720 MED/1.4 DK-0200-MarED-04314 18-05-2018 FORCE Certification

Module B data
Description: ftem: Type examination Date of issue: Notified Body:
certífræte id:
PS2004 MED/1.5b DK-0200-MarED-048 28-10-2015 FORCE Certification
P52007 MED/1.6b 14 951-15 HH 07-10-2015 DNV/GL
PS2014 MEDi 1.5b 0200-MarED-6096 13-03-2019 FORCE Certiflcation
PS4002 MED/1.5a/b DK-0200-MarED-02601 23-04-20t9 FORCE Certification
PS4009 MED/1.5b DK-0200-MarED-070 28-10-201s FORCE Certification
PS4038 MED/1.5a/b DK-0200-MarED-02601 23-04-20t9 FORCE Certification
PS4052 MED/1.5a DK-0200-MarED-03203 07-12-20t7 FORCE Ceftification
PS41 15 MED/1.5a DK-0200-MarED-205 23-03-2018 FORCE Certification
PS41 16 MED/1.5a DK-0200-MarED-02259 16-03-2018 FORCE Certification
PS4148 MED/1.5b 0200-MarED-06836 t7-07-2019 FORCE Certification
PS4169 MEDlL.5alblc DK-0200-MarED-095 2r-04-2016 FORCE Certification
PS4170 MEDlL.5alblc DK-0200-MarED-108 22-03-2018 FORCE Certification
MED 1.6alb/c
PS41BO MED/1.5b/c DK-0200-MarED-130 23-03-2018 FORCE Certification
PS4185 MED/1.6alb DK-0200-MareED-140 23-03-2018 FORCE Certifìcation
PS4188 MED/1.6alb/c DK-0200-MarED-00828 22-0s-20t9 FORCE Certification
PS4189 MED/1.5a/b/c DK-0200-MarED-00563 22-0s-20t9 FORCE Certification
PS4190 MED/1.5b/c DK-0200-MarED-00145 06-02-2019 FORCE Certification
PS4191 MED/1.6blc DK-0200-MarED-00146 06-02-2019 FORCE Ceftification
PS5002 MED/1.6b/c DK-0200-MarED-063 09-05-2018 FORCE Certification
PS5003 MED/1.5a DK-0200-MarED-073 2B-10-2015 FORCE Ceftification
PS5006 MED/1.sb DK-0200-MarED-071 28-10-201s FORCE Certification
PS5019 MED/1.5b DK-0200-MarED-093 14-09-2017 FORCE Ceftification
PS5026 MED/1.6b DK-0200-MarED-03926 16-03-2018 FORCE Certifìcation
PS5040 MED/1.6blc DK-0200-MarED-22I 29-10-2015 FORCE Certification

AKH-FFS-172 PS8400 Page 12


Annex to
EC Quality System Module D Ceftificate FORCE
Directive for Marine Equipment Certification
Ceftificate No.: 0200-MarÊD-022L3 ver 11
Issued by FORCE Certification A/S - EC-notified body number 0200 Page2 of 2

Modale B data

Deærþtion: ftem: Type examination Date of issue: Notifred Body:


ce¡tifrate id:

PS62xxN MED/3.3 0200-MarED-03927 02-09-2019 FORCE Certification


PS65)o(A MED/3.3 0200-MarED-03927 12-03-2019 FORCE Ceftification
PS65>o<C MED/3.3 0200-MarED-03927 L2-O3-2019 FORCE Certification
PS66>o< MED/3.3 0200-MarED-03927 t2-t7-20t9 FORCE Certification
PS84>x MED/3.3 0200-MarED-03927 L2-03-2019 FORCE Ceftification

Gloves
Module B data

Description: ftem: Type examination Date of issue: ltlotifïed Body:


certiÍicate id:

Art. 61104 MED/3.5 0200-MarED-04927 t7-09-20L8 FORCE Certification

Places of production:
. Vik¡ng Life-Saving Equipment AS
Sæddíng Ringvej 13
6710 Esbjerg V
Denmark

a Omelia EOOD
7 Atanas Burov Str
4960 Rudozem
Bulgaria

a Viking Life-saving Equipment LTD


Laem Chabang Industrial estate 38/43 Moo 5
Tungsukla Sriracha, Chonbure 20230
Thailand

a PT.John's Gloves Factory


Jl. Beringin raya 871
Ngaliyan
Semarang
Indonesia

Restrictions:
None

AKH-FFS-172 PS8400 Page 13


VIKING Product Documentation

Economy Basic
Material no.: PS8450

PAGE 1

AKH-FFS-172 PS8450 Page 14


&DANAK FORCE
PROD Reg. nr. 7020 Certification

EC Type-Examination (Module B)
Directive for Marine EquiPment
Ceftificate No.: O20O-MarED-O3927 version 3
Issued by FORCE Ceftification A/S - EC-notified body number 0200
This is to certiff that:
FORCE Ce¡tification A/S did undertake the relevant type approval procedures for the equipment identified
below which was found to be in compliance with the Fire protection requirements of Marine Equipment
Directive (MED) 20L4l90lEU, last amended by Regulation (EU) 2OtBl773 subject to any conditions in the
schedule attached hereto.
Applicant and Manufacturer: Viking Life-Saving Equipment A/S
Sædding Ringvej
671O Esbjerg V
Identification of Marine Equipment:
Product Type: Fire Protection Equipment
Item: MED/3.3 Fire-fighter's outfit
Product Designation: PS65)cA Fire fighter suit
PS65uC Fire fighter suit
PS84n Fire fighter suit
Specified Standard: EN 469:2OO5+41:2OO6/AC:2OO6
The examined samples were found to fulfill the requirements of the applicable reg. SOI-AS 74 as amended,
and as specified in Regulation (EU) 20L81773, item MED/3.3. Documentation for observance of relevant
requirements stated in ANNEX II (Module B) of the Directive and the provisions of IMO Res. MSC 98(73)
- (fss Code) 3, together with the basis for the type examination are described in the appendix to this
ceftificate,
This certificate will remain valid unless cancelled or revoked, provided the conditions in the attached
appendix are complied with and the equipment remains satisfactory in service, The certifìcate will not be
valid if the manufacturer makes any changes or modifications to the approved equipment, which have not
been notified to, and agreed with the notified body named on this certificate.
Should the specified regulations or standards be amended during the validity of this ceftificate, the
product(s) is/are to be reapproved prior to itlthey being placed on board vessels to which the amended
regulations or standards apply.
This is an update of EC-Type Examination Certificate DK-0200-MarEd-O3927 version 2 due to addition of
a new model. Existing products conforming to the previous ceftificate are still valid.

FORCE Ceftification A/S task No.: 118-3437U ID. No. 05596

Date of issue: 2019-03-12


Date of expiry: 2024-O3-L2

Kasper unk Eliasen


Certification manager Examiner
The Mark of Conformity may only be affixed to the above type
approved equipment and a Manufacturer's Declaration of Conformity
may only be issued when the production/product assessment module
(D, E or F), ANNÐ( II of the Directive is fully complied with and
controlled by a written inspection agreement with a notified body.

Extracts from this EC Type-Examination Cedificate may only be reproduced with a written permission from FORCE Certification A/S
FORCE Ceftification A/S - Park Allé 345,2605 Brøndby, Denmark - T: +45 43250L77 - Fax: +45 43250010 - info@forcecertification.com

AKH-FFS-172 PS8450 Page 15


Appendix to EC Type-Examination Ceftificate FORCE
Directive for Marine Equipment
Certification
Certificate No.: 0200-MarED-03927 version 3
Issued by FORCE Certifìcation A/S - EC-notified body number 0200 Page 1 of 5

Applicant and Manufacturer: Viking Life-Saving Equipment A/S


Sædding Ringvej
6710 Esbjerg V
Identification of Marine Equipment:
Product Type: Fire Protection Equipment
Item: MED/3.3 Fire-fighter's outfìt
Product Designation: PS65)od Fire fìghter suit
PS65>xC Fire fighter suit
PSB4rc< Fire fighter suit
Suit consisting of jacket and trousers, or a coverall.
Jacket and trousers must be worn at the same time to attain protection

Design

Jacket styla J1

---
-t-
Jacket style J2

AKH-FFS-172 PS8450 Page 16


Appendix to EC Type-Examination Ceftificate
Directive for Marine Equipment
FORCE å=
Certification ê---
Certificate No.: 0200-MarED-03927 version 3 --
Issued by FORCE Certification A/S - EC-notified body number 0200 Page 2 of 5

Design (continued):
Trousers style T1

¡- ¡I¡I
r-F IE lrl'
-

- -
Trousers slyle T2

I
-
=

E rE
IE G
- T
Stvle Tvpe of layer Comoonent assemblv
Outer fabric Nomex Nxt 195 grlm2
P56s)o<A Thermal barrier Ibena aramide fleece 175 grlm2
Inner liner Nomex/Viscose 125 qrlmz
Outer fabric Aramide I0Oo/o 220 grlmz
PS65n<C Thermal barrier Ibena aramide fleece I75 grlmz
Inner liner Nomex/Viscose 125 qrlm2
Outer fabric Aramide L}Oo/o 220 grlmz
PSB4>x Moisture barrier TopazPlJ L45 grlmz
Ibena aramide fleece 175 grlmz Ibena aramide fleece I75 grlmz
Nomex/Viscose 125 grlm2 Nomex/Viscose 125 qrlm2

AKH-FFS-172 PS8450 Page 17


Appendix to EC Type-Examination Ceftificate FORCE
Directive for Marine Equipment
Certification
Certificate No.: 0200-MarED-03927 version 3
Issued by FORCE Certification A/S - EC-notified body number 0200 Page 3 of 5

History:

Issue/chanoe: Document: Date:


- Original certificate DK-0200-F,068 2004-08-10
- Alternative outer fabric, lining and 1st Supplement to appendix 2007-04-16
thermal barrier combination
- Alternative outer fabric, lining and DK-O200-MarED-068 version 1 2008-06-02
thermal barrier combination and new
certificate identification No,
- General designation PS65)C( DK-0200-MarED-068 version 2 2008-07-15
- Updating of materials, new expiry date DK-0200-MarED-068 version 3 20rr-07-22
- New Notified Body DNV - GL 0098, 60 707 - 13 HH 2015-12-02
new certificate No.
- New Notified Body FORCE Certification 0200-MarED-03927 version 1 2018-06-27
A/S 0200
- Update of amendment 0200-MarED-03927 version 2 2018-08-10
- Revision and new model PS84rc< 0200-MarED-03927 version 3 2019-03-12

Ma n ufactu rer/ Su b-su Þp I ier:


Manufacturer: Viking Life-Saving Equipment A/S
Sædding Ringvej
6710 Esbjerg V
Place(s) of production Omelia
4960 Rudozem, Region Smolian
Bulgaria

Viking Life-Saving Equipment


LAEM CHABANG INDUSTRIAL ESTATE
20230 THAILAND

AKH-FFS-172 PS8450 Page 18


Appendix to EC Type-Examination Ceftificate
Directive for Marine Equipment
FORCE
Certification
+=
€---
Certificate No.: 0200-MarED-03927 version 3
Issued by FORCE Certification A/S - EC-notified body number 0200 Page 4 of 5

Documentation for observance of the relevant requirements in


EN 469: 2005+41: 2006/AC: 2OO6:
Repofts covering Reports covering
Clause: assembly PS65)od assembly PS65xxC/PSB4>o<:
6.1 Flame spread Aitex 2015001604 cB s888s/B
cB 16.05546.01
cB 13.0676,01
cB 16.04896,01
cB 18.00079.01
cB 18.00079,02
cB 18.00079.03
c87067 0lB
6.2 Heat transfer, flame cB 16.0ss46,01 cB70670lB
cB 16,04550.1
6.3 Heat transfer, radiation cB 16.04664.01 cB72t97lD
cB 70670/N
6.4 Residual tensile strenqth Aitex 2015CO0981 cB 79668/D
6.5 Heat resistance Aitex 2015CO0981 CB 5BBB5
cB 16.04896,01 sTFr 2016 0778
cB 18.00079.01 Hohenstein 13.0.21313
cB 18.00079.02
cB 18,00079.03
6.6 Tensile strength(s) Aitex 2015CO0981 CB 5BBB5
cB 15.02671.01
6.7 Ïear strenqth Aitex 2015CO0981 CB 58885
6.8 Surface wetting Aitex 2015CO0981 CB 58885
cB 2LZ20|C
6.9 Dimensional change Aitex 2015CO0981 CB 58885
cB 16.05546.01
Hohenstein 13.0.21313
6.10 Liquid chemicals cB 16.05885.01 cB sBBBs/C
STFI 2016 1B3O
6.11 Water penetration FT 118-23052.a cB 16.06460,01
6.12 Water vapour cB 16.04664.01 cB 13.01844.0s
cB 72L79lD
6.13 Erqonomics FT 118-23052.b FT 118-23052.b
6.14 Visibility FT 118-23052.a FT 118-23052.a
FroH 354276401 FroH 3s4276A01
FIOH 330987A01 FroH 330987A01
FIOH 300432A01 FroH 300432A01
FIOH 24L74LAOI FIOH 24L74tA0t
6.15 whole qarment (optional) Dupont E 20I6tLlB 2924 n.a

CB = Centexbel; FT = FORCE Technology

Partial conclusion: The examined samples are found to fulfil the requirements in the applicable reg
SOLAS 74, as amended, and the InternationalTesting Standard
EN 469:2005+A1:2006/AC:2006 referred to in MED/3.3 as well as the
requirements in ANNEX II, Module B of the directive.

AKH-FFS-172 PS8450 Page 19


Appendix to EC Type-Examination Ceftificate FORCE
Directive for Marine Equipment
Certification
Certificate No,: 0200-MarED-03927 version 3
Issued by FORCE Certification A/S - EC-notified body number 0200 Page 5 of 5

The following documentatíon was available:


"Technical specification, Fire fighter garment in acc. with EN 469:2005+AI:2006" dated 2018-12-12

List of materials/manufacturers used for See "Líst of Materials for DK-0200-MarED-03972"


manufacturing the device: valid on the date of production,

Conclusion
Based on the above-mentioned attestatíon it can be concluded that the fire fighter outfit designated
PS65)od, PS65>uC, and PSB4rc<, meet the conditions of EC type-examination in accordance with the
Marine Equipment Directive (MED) 20l4l90lE9 last amended by Regulation (EU) 20L81773.

FORCE Ceftification A/S task No.: 118-34371

Date: 2019-03-12

V*q^ ll (^-
Kaspfr Munk Eliasen
Examiner

AKH-FFS-172 PS8450 Page 20


VIKING Product Documentation

Fire Protective Gloves (Art. 61104)


Material no.: 10179xx

Waterproof and fire resistant gloves.

Type: Fire-protective glove


Colour: Black
Sizes:
7 - item no. 1017943
8 - item no. 1017945
9 - item no. 1017947
10 - item no. 1017948
11 - item no. 1017949
12 - item no. 1017950

Material
- Outer fabric: Top and palm of hand: Fire resistent Napa leather 1,3-1,5mm
- Cuff: Split suede leather 1,4mm
- Knuckle protection: 3mm latex
- Lining:Top and palm of hand: Warron 200gr/m2.
- Cuff: 70% Mita-aramid/30% Viscose
- Stitching: Dupont™ Kevlar®

Miscellaneous
- Elastic intake at wrist
- D-ring for suspension on side of cuff
- Loop/hook fastener for intake at shaft

Approvals: CE approved according to EN659 and 96/98/EC SOLAS

DuPont™, Nomex® and Kevlar ® are registered trademarks or trademarks of E.I. du Pont de Nemours and
Company or its affiliates.

AKH-FFS-172 10179xx Page 21


É DANAK
PROD Reg. nr. 7020
FORCE
Certification
+
>-

--:=

EC Type-Examination (Module B)
Directive for Marine Equipment
Ceftificate No.: 0200-MarED-O4927 version 1
Issued by FORCE Ceftification A/S - EC-notified body number 0200

This is to ceftify that:


FORCE Ceftification A/S did undeftake the relevant type approval procedures for the equipment identified below
which was found to be in compliance with the Fire protection requirements of Marine Equipment Directive (MED)
2OL4|90/EU, as amended, last amended by Regulative (EU) 20181773 (2nd Amendment) subject to any conditions
in the schedule attached hereto.

Applicant and Manufacturer: VIKING LIFE.SAVING EQUIPMENT A/S


Sædding Ringvej 13
6710 Esbjerg V
Denmark

Identification of Marine Equipment:


Item: MED/3.5

Product Type: Rescue Gloves for Fire Fighterc


Product Designation: Rescue II - Article 61104
Size: 10
Specified Standard: EN 659:20O3 incl. A1:2O08 and AC:2009.
(Tested in accordance with):

The examined samples are found to fulfil the requirements stated in:
The International Testing Standard EN 659:2003 incl, A1:2008 and AC:2009 and the applicabte reg. SOLAS 74 as
amended, where the relevant requirements are specified in the amendment to The Directive, item MED/3.5.

Documentation for observance of relevant requirements stated in ANNÐ( II (Module B) of the Directive and the
basis for the type examination are described in the appendix to this ceftificate.

This certifrcate will remain valid unless cancelled or revokd, prouided the conditions in the attached appendix are
complid with and the qurpment remains ntisfactory in seruice.
The ce¡tificate will not be valid if the manufacturer makes any changes or modifrcations to the approvd quipmenÇ
whtch have not bæn notÌfrd tq and agred with the notified body namd on this certifrcate.

Should the spæifred regulations or standards be amended during the validity of this ceftifrcatg the product(s) isþre
to be reapprovd prior to it/they being placed on board vessels to which the amended regulations or standards
apply.
This version of EC-Type Evamination Certificate DK-0200-MarEd-04927 version I dated 2018-09-01 is the original.
FORCE Ceftification A/S task No.: 118-31617
FORCE Certification A/S ID No.: 2018-09-01
Date of issue: 2018-09-17
Date of expiry: 2023-09-t7
Ì\,
Niels Sibbernsen Philippa rup Osted
Ceftification Manager 5 Examiner

The Mark of Conformity may only be affixed to the above type


approved equipment and a Manufacturer's Declaration of
Conformity may only be issued when the production/product
assessment module (D, E or F), ANNÐ( II of the Directive is
fully complied with and controlled by a written inspection
agreement with a notified body.

o20o/18
Extracts from this EC Type-Exam¡nation CertifÌcate may only be reproduced w¡th a written ærmission from FORCE Cedifìcation Ay'S

FORCE Certifìcation A/S Park Allé 345 2605 Brøndby Denmark ' Tel +45 43 25 0l 77' Fay. +45 43 25 O0 10' cert@force-cert.dk . www.force-cert.dk

AKH-FFS-172 10179xx Page 22


Appendix to EC Type-Examination Ceftificate FORCE €l=
Directive for Marine Equipment
Certification
Certificate No.: 0200-MarED-04927 version 1
Issued by FORCE Certification A/S - EC-notified body number 0200
=F-
Page 1 of 3

and
Applicant VIKING LIFE-SAVING EQUIPMENT A/S
Manufacturer: Sædding Ringvej 13
6710 Esbjerg V
Denmark
Identification of Marine Equipment:
Item: MED/3.5

Product Type: Protective gloves for Fire Fighters

Product Designation: Rescue II - Article 61104

Design

Photo upper and inner side

Rescue II - Article 61104

AKH-FFS-172 10179xx Page 23


Appendix to EC Type-Examination Certificate FORCE
Directive for Marine Equipment
Certification
Ceftificate No.: 0200-MarED-04927 version 1
Issued by FORCE Certification A/S - EC-notified body number 0200 Page 2 of 3

Histoly:
Issue/chanqe: Document Date:
- New FORCE certificate DK-0200-MarED-04927 v er. L 2018-08-31
- GL, Germanischer Lloyd, ceftificate 61 040 - 13 HH 2014-03-03
- Updated to 5th amendment,
new test standard EN 659+41:2008,
new technical specification/materials DK-0200-MarED-086 version 2 2010-05-28
- New ceftificate name and technical
specification (range of leather DK-0200-MarED-086 version 1 2009-04-23
thickness increased)
- Original FORCE certificate DK-0200-F.086 2005-09-01

M an ufactu rerl Su b-su ppl ier:


P.T. John's Glove Factory Jl. Beringin Raya No. 871 Tambak Aji, Ngaliyan
Semarang - Jawa Tengah
Indonesia

Materials:
Top hand/Palm hand: Fire resistant leather 1.3 to 1.5 mm
Lining: 1 000/o Pa ra-Aram id(Twa ron )
Lining cuff: 350/oMeta-Aramid/65oloViskose FR
Reflective tape: Retro reflective tape
Velcro / astrakhan alternative 1: Flausch- und Hakenband 25mm, black
Velcro / astrakhan alternative 2: Flausch- (2QM NOzsIF FA) und Hakenband 25mm
Cosmolon Haftversch loss
Knuckle protection Latex

AKH-FFS-172 10179xx Page 24


Appendix to EC Type-Examination Ceftificate FORCE
Directive for Marine Equipment
Certification
Certificate No.: 0200-MarED-04927 version 1
Issued by FORCE Ceftiflcat¡on A/S - EC-notified body number 0200 Page 3 of 3

Documentation for obselance of the relevant requirements:

Test House File No. Testing/Inspection of:

Oï, Austria 46942 Gloves (Tech. Spec. ed. 3) tested according to EN 659:2003
ÖTI, Austria 46942-2 Gloves (Tech. Spec. ed. 4) tested according to EN
659:2003+41:2008

Paftial conclusion: The device designated "Rescue II Article 6IL04" is found to fulfil the requirements in The
International Testing Standard EN 659:2003 incl. A1:2008 and AC:2009 and the
applicable reg. SOLAS 74 as amended, where the relevant requirements are specified in
the amendment to The Directive, item MED/3.5 as well as the requirements in ANNEX II
(Module B) of the Directive.

The following documentation was available:

Description of quality management system ISO 9001:2015 - DNV-GL


User Manual and marking: TS Protective Gloves Art. 61104, Edt. 5, 23-08-2018
List of materials/manufacturers used for See "List of Materials for DK-0200-MarED-04927" valid on
manufacturing the device: the date of production.

Conclusion
Based on the above-mentioned attestation it can be concluded that the Protective gloves for Fire Fighters,
designated, "Rescue II Afticle 6t104", meets the conditions of EC type-examination in accordance with the Marine
Equipment Directive (MED) 2014/90/EU as amended, last amended by Regulative (EU) 20t81773 (2nd
Amendment).

FORCE Ceftification A/S task No,: 118-31617

Date: 2018-09-17

(r4
Ph¡l Weirup Osted
ç . Examiner

AKH-FFS-172 10179xx Page 25


É DANAK
PROD R€9. nr.7020
FORCE
Certification

EC Quality System (Module D) Cettificate


Directive for Marine Equipment

Certificate No.: O2OO-MarED-02213 ver 11


Issued by FORCE Ceftification A/S - EC-notified body number 0200

This is to certiff that:


FORCE Certification A/S d¡d undeftake the relevant quality assessment procedures for the equipment of the
manufacturer identified below which was found to be in compliance with the Life Saving Appliance and Fire
Protection requirements of Marine Equipment Directive (MED) 2OL4l90lEU, as amended, last amended by
Regulation (EU) 2019/1397, and with the type described in the EC Type Examination Ceftificates (Module B)
listed in the Attachment to this Ceftificate, subject to any conditions in the schedule attached hereto.

The manufacturer: Viking Life-Saving Equipment A/S


Sædding Ringvej 13
6710 Esbjerg V
maintains and applies a quality system in accordance with the requirements of the Maritime Equipment
Directive Annex B, Module D.
Scope:
Item MED/1.4 Lifejacket
Item MED/1.5a Immersion suits and anti-exposure suits 1(Immersion suit without inherently insulation)
Item MED/1.5b Immersion suits and anti-exposure suits 1 (Immersion suit with inherently insulation)
Item MED/1.5c Immersion suits and anti-exposure suits 1 (anti-exposure suit)
Item MED/1.6a Immersion suits and anti-exposure suits 2 (Immersion suit without inherently insulation)
Item MED/1.6b Immersion suits and anti-exposure suits 2 (Immersion suit with inherently insulation)
Item MED/1.6c Immersion suits and anti-exposure suits 2 (anti-exposure suit)
Item MED/3.3 Fi re-fighter's outfit: protective clothi ng

Item MED/3.5 Fire-fighter's outfit: gloves

Note: 1) tusigned to be worn in conjunction with a lifejacket


2) tusigned to be worn in conjunct¡on without a lifejacket

This cetificate remains valid unless cancelled, expired or revoked

This ceftificate authorises the manufacturer or his authorised representative established within the Community
in conjunction with the EC TYPE EXAMINATON (MODULE B) CERIFICATE of the equipment listed in the
scope to affix the "Mark of Conformity" (wheelmark).
This certifrate loses its ualidity if the manufacturer makes any changes or modifrcations to the approved quality system, which have not
been notifred tq and agreed with the notifred body named on this certifiate and/or afrer lapse of time, withdrawal or evocat¡on of the EC
Type Examination (Module B) Cert¡ficate.
This new vercion of existing certifræte Dk-0200-MarED-02213 ver lQ dated 2019-12-12 is issued due to
conection of reference to wrong amendment
FORCE Ceftification A/S task No.: 119-37184, FC ID No. 07793
This ceftificate consists of 3 pages.

Date of issue: 2019-12-18


Date of expiry: 2022-03-L3

Jensen
FORCE A/S, Ceftification Manager

tr o2oo/YYYY
0200: Number of the Notified Body responsible for quality surveillance module
YYYY: Last two dig¡ts of the year in which the mark is affixed.

Extracts from this EC Type-Examination Certificate may only be reproduced with a written permission from FORCE Cert¡ficat¡on A/S

FORCE Certification Á'/S ' Park Allé 345 ' 2605 Brøndby ' Denmark ' Tel +45 43 25 01 77' Fax +45 43 25 00 10' cert@force-cert.dk ' www.force-cert.dk

AKH-FFS-172 10179xx Page 26


Annex to
EC Quality System Module D Ceftificate FORCE
Directive for Marine Equipment Certification
Certificate No.: 0200-MarED-02213 ver 11
Issued by FORCE Certification A/S - EC-notified body number 0200 Page 1 of 2

Module B data
Descrþtion: ftem: Type examination Date of issue: Ilotified Body:
certifrcate id:
PV9313 MED/1.4 DK-0200-MarED-03907 08-03-2018 FORCE Certification
PV93L7 MED/1.4 DK-0200-MarED-185 07-09-20t6 FORCE Certification
PVg319 MEDIT.4 DK-0200-MarED-168 L7-03-2017 FORCE Certification
PVg320 MED/1.4 DK-0200-MarED-03905 08-03-2018 FORCE Certifìcation
PV9340 MED/1.4 0200-MarED-07262 26-09-2019 FORCE Certifìcation
PV9341 MED/1.4 0200-MarED-06195 04-04-20t9 FORCE Ceftification
PV9342 MED/1.4 DK-0200-MarED-03259 23-rt-20t7 FORCE Certification
PVg360 MED/1.4 DK-0200-MarED-03906 08-03-2018 FORCE Ceftification
PVg361 MED/1.4 DK-0200-MarED-03904 08-03-2018 FORCE Certification
PV9419 MED/1.4 DK-0200-MarED-195 t3-03-20t7 FORCE Ceftification
PVg506 MED/1.4 DK-0200-MarED-01073 04-10-2016 FORCE Ceftification
PV95OB MEDIT.4 DK-0200-MarED-01074 04-10-2016 FORCE Certification
PV9516 MEDIL.4 DK-0200-MarED-OI77O 20-t2-20r7 FORCE Certifìcation
PVg518 MED/1.4 DK-0200-MarED-01649 20-r2-20r7 FORCE Cedification
PVg520 MED/1.4 DK-0200-MarED-01075 04-10-2016 FORCE Ceftification
PVg521 MED/1.4 14 511 - 15 HH 30-06-201s DNV/GL
PV9s22 MED/1.4 DK-0200-MarED-01378 20-t2-20t7 FORCE Certification
PVg530 MED/1.4 DK-0200-MarED-03284 27-rr-20r7 FORCE Certification
PV9720 MED/1.4 DK-0200-MarED-04314 18-05-2018 FORCE Certification

Module B data
Description: ftem: Type examination Date of issue: Notified Body:
certífræte id:
PS2004 MED/1.5b DK-0200-MarED-048 28-10-2015 FORCE Certification
P52007 MED/1.6b 14 951-15 HH 07-10-2015 DNV/GL
PS2014 MEDi 1.5b 0200-MarED-6096 13-03-2019 FORCE Certiflcation
PS4002 MED/1.5a/b DK-0200-MarED-02601 23-04-20t9 FORCE Certification
PS4009 MED/1.5b DK-0200-MarED-070 28-10-201s FORCE Certification
PS4038 MED/1.5a/b DK-0200-MarED-02601 23-04-20t9 FORCE Certification
PS4052 MED/1.5a DK-0200-MarED-03203 07-12-20t7 FORCE Ceftification
PS41 15 MED/1.5a DK-0200-MarED-205 23-03-2018 FORCE Certification
PS41 16 MED/1.5a DK-0200-MarED-02259 16-03-2018 FORCE Certification
PS4148 MED/1.5b 0200-MarED-06836 t7-07-2019 FORCE Certification
PS4169 MEDlL.5alblc DK-0200-MarED-095 2r-04-2016 FORCE Certification
PS4170 MEDlL.5alblc DK-0200-MarED-108 22-03-2018 FORCE Certification
MED 1.6alb/c
PS41BO MED/1.5b/c DK-0200-MarED-130 23-03-2018 FORCE Certification
PS4185 MED/1.6alb DK-0200-MareED-140 23-03-2018 FORCE Certifìcation
PS4188 MED/1.6alb/c DK-0200-MarED-00828 22-0s-20t9 FORCE Certification
PS4189 MED/1.5a/b/c DK-0200-MarED-00563 22-0s-20t9 FORCE Certification
PS4190 MED/1.5b/c DK-0200-MarED-00145 06-02-2019 FORCE Certification
PS4191 MED/1.6blc DK-0200-MarED-00146 06-02-2019 FORCE Ceftification
PS5002 MED/1.6b/c DK-0200-MarED-063 09-05-2018 FORCE Certification
PS5003 MED/1.5a DK-0200-MarED-073 2B-10-2015 FORCE Ceftification
PS5006 MED/1.sb DK-0200-MarED-071 28-10-201s FORCE Certification
PS5019 MED/1.5b DK-0200-MarED-093 14-09-2017 FORCE Ceftification
PS5026 MED/1.6b DK-0200-MarED-03926 16-03-2018 FORCE Certifìcation
PS5040 MED/1.6blc DK-0200-MarED-22I 29-10-2015 FORCE Certification

AKH-FFS-172 10179xx Page 27


Annex to
EC Quality System Module D Ceftificate FORCE
Directive for Marine Equipment Certification
Ceftificate No.: 0200-MarÊD-022L3 ver 11
Issued by FORCE Certification A/S - EC-notified body number 0200 Page2 of 2

Modale B data

Deærþtion: ftem: Type examination Date of issue: Notifred Body:


ce¡tifrate id:

PS62xxN MED/3.3 0200-MarED-03927 02-09-2019 FORCE Certification


PS65)o(A MED/3.3 0200-MarED-03927 12-03-2019 FORCE Ceftification
PS65>o<C MED/3.3 0200-MarED-03927 L2-O3-2019 FORCE Certification
PS66>o< MED/3.3 0200-MarED-03927 t2-t7-20t9 FORCE Certification
PS84>x MED/3.3 0200-MarED-03927 L2-03-2019 FORCE Ceftification

Gloves
Module B data

Description: ftem: Type examination Date of issue: ltlotifïed Body:


certiÍicate id:

Art. 61104 MED/3.5 0200-MarED-04927 t7-09-20L8 FORCE Certification

Places of production:
. Vik¡ng Life-Saving Equipment AS
Sæddíng Ringvej 13
6710 Esbjerg V
Denmark

a Omelia EOOD
7 Atanas Burov Str
4960 Rudozem
Bulgaria

a Viking Life-saving Equipment LTD


Laem Chabang Industrial estate 38/43 Moo 5
Tungsukla Sriracha, Chonbure 20230
Thailand

a PT.John's Gloves Factory


Jl. Beringin raya 871
Ngaliyan
Semarang
Indonesia

Restrictions:
None

AKH-FFS-172 10179xx Page 28


VIKING Product Documentation

Fireman boots
Material no.: S-5260360xx

Comfortable boots with reinforced toes and mid sole. Heat and oil resistant rubber sole with protection
against penetrating nails.

Type: Harvik 9687 L


Material: Rubber (see full material description on technical datasheet)
Colour: Black/yellow
Size: 36-50
Approvals: EN 15090:2012, EN ISO 20345:2011, EN 50321:1999 and SOLAS/MED

AKH-FFS-172 S-5260360xx Page 29


AKH-FFS-172 S-5260360xx Page 30
AKH-FFS-172 S-5260360xx Page 31
AKH-FFS-172 S-5260360xx Page 32
AKH-FFS-172 S-5260360xx Page 33
AKH-FFS-172 S-5260360xx Page 34
AKH-FFS-172 S-5260360xx Page 35

You might also like