Professional Documents
Culture Documents
DVR Quick Start Guide V3.0.0 PDF
DVR Quick Start Guide V3.0.0 PDF
1、Remove set screws for upper cover 2、Remove the casing of the main unit
3、Install data power cord for the 4、Fix the holder with the hard disk on the
hard disk base board
5、Close the top cover and fasten 6、Install set screws for upper cover
Note: SATA hard disk inside the main unit does not support hot plug, please properly connect
wires in the hard disk prior to booting.
2
You will see the following picture:
Video control
Log out system
Video playback
In preview screen, click right mouse button, select "Recording Control" in the shortcut menu, or click
the shortcut icon on the preview screen directly, you will see the "Recording Control" interface as
shown in the following picture. Select channels to be recording in the “manual” check boxes, press OK for
3
5.1 Main interface
The description of each icon function as the following:
icon function description icon function description
Directory: For equipment The local video, select a live preview
management, classification of screen to start the video. Video files
grouping and operation saved on your PC.
equipment : Multi-channel DVR,
Local snap, select a live preview
NVR, etc.
screen starts to capture. The snap
If the corresponding equipment
images stored on your local PC.
don't online icon as grey
Camera:The IPC or a channel, etc,
Talkback, real-time two –way
If the corresponding camera don't
intercom
online icon as grey
Single picture full-screen playback,
Monitoring, one-way receive the
can also double-click on the play form
playback audio
in full-screen playback
64 split-screens, support 1、4、9、16、
Turn off the live preview
25、36、49 and 64 split-screens.
full screen, picture full screen
sign out
playback.
64 split-screens, support 1、4、9、16、
help, click to open help page
25、36、49 and 64 split-screens.
Page up Page down
4
Device name: the display name that you add to the user device list, more convenient to people identify
(such as living room)
Device type: lens (the channel of the IPC, DVR\NVR), device (such as DVR\NVR)
Connection modes: (IP address and port access mode), P2P (cloud- penetration mode)
Protocol: select the front-end device protocol
Cloud ID: you can get the cloud id from the DVR, Main menu->System management->system update
Username: the login username of device
Password: device login password
Channel NO: view what channel number, start from 1. Completed IPC as 1 (if it is the device type, it is the
channel number mean: complete 8 if is 8Channel DVR)
Stream: request to a front- end device stream format while live preview, 0 is main stream,1 is sub stream,
default is sub stream.
5.3 Add equipment successfully
5.4 You can choose one device in the device list,
double click it can preview.
5
Chapter six Mobile client using
Support two installation modes and the user can choose one way for installation.
You can operate according to the following steps
1. Online installation
2. Login interface
Open the software into the login interface,
inputting the username and password and click
button “login”, then it will be login the application.
Detailed setting can refer to new wizard.
6
6. Remote playback
Click icon , Into the "search" dialog box, In the main menu, click "remote playback"
can search the equipment information option, then choose to play back
correspondingly. video camera
follows:
A)Add equipment: add DVR(multi channel)
B)Add lens :add single camera(Single channel)
C)Modify the name: Modify equipment or lens.
D ) Modify IP: The modification is in IP
address .Subnet mask and the gateway
information etc...
E) Modify the equipment password.
7. Local playback
In the main menu, click “local playback”
option, into interface: