Shell Dromus Oil BL is a highly stable oil-in-water emulsion developed for use as a general purpose, cost effective, and metalworking fluid.
Appearance Amber Fluid
Applications Emulsion Type Dense white General Machining Specific Gravity @ 15°C kg/l 0.92 Grinding pH at 5% Concentration 8.9
Performance Features Corrosion Breakpoint (IP 287) 30/1
Nitrite Free These characteristics are typical of current
Operators’ health & safety. Reduced risk production. Whilst future production will of the formation of nitrosamines conform to Shell's specification, variations in these characteristics may occur. Phenol & Chlorine Free Environmentally safe. Low disposal costs Storage Lubricity The product should be stored under cover. High oil content provides excellent Avoid extremes of temperature and protect machine tool lubrication from frost. Packages should be kept sealed when not in Emulsion Stability use. Tolerant to difficult diluent waters Corrosion Inhibition Health & Safety High level of corrosion inhibition on tool, Shell Dromus Oil BL is unlikely to present any slideways and components significant health or safety hazard when properly used in the recommended application, and good standards of industrial and personal hygiene are maintained. Materials Low to medium tensile steels For further guidance on Product Health & Safety refer to the appropriate Shell Product Safety Aluminium, copper and their alloys Data Sheet.
Recommended Concentrations System Cleaner
It is recommended that a Shell System Cleaner % Ratio is used to clean the machine tool coolant Grinding 2-3 50:1 - 30:1 system prior to filling with a fresh emulsion. General Machining, 3-5 30:1 - 20:1 non-ferrous materials Disposal General Machining 5 20:1 Metalworking fluids should not be discharged ferrous metals directly into drains, sewers, rivers, streams or on to wasteland. Concentrations may need to be increased when machining difficult materials and where For further information consult the Health & the water hardness of the diluent has an effect Safety Data Sheet supplied with the product. on corrosion inhibition. Advice Mixing Advice on applications not covered in this Shell Dromus Oil BL should be added gradually leaflet may be obtained from your Shell into the full volume of water - never the Representative, reverse, and gentle agitation maintained until all the oil has been added and a uniform emulsion obtained. Use lower concentration for top-up to achieve recommended mix-ratios. Typical Physical Characteristics July 1994