Professional Documents
Culture Documents
Administrative & Legal Service Finance & Management Service Internal Audit Service Planning & Evaluation Service
PISOLAR: Payment Innovation for Solar Home Concentrating Solar Power (CSP) for Micro-turbine
Applications (On-going)
System Ownership by Lay Away Routine (On-
going)
Solar Research and Development Projects
Nanostructures for Solar Cell Applications GaAs-based Solar Cell Devices
Balance-of-system components for solar thermal air conditioning and/or refrigeration (power electronics, etc.) Corrosion mitigation for floating solar PV
Inverter efficiency improvement system
Balance-of-system components for solar thermal-based power devices (power Inverter efficiency improvement (esp. at
electronics, mirrors, support structures, tracker system, heat sinks, etc.) partial load)
Concentrator photovoltaics (CPV) materials (e.g. multi- Concentrating solar power (CSP) working fluid development (e.g. Spent solar PV recycling
junction) development and scale-up processing molten salt, organic solvents, ionic liquid, nanofluids) processing methods
Energy efficient and/or cost-effective silicon (Si) refining processing methods for Thin-film Si-based solar PV and Organic photovoltaics (OPV) materials (e.g. polymer,
Si-based (monocrystalline, polycrystalline, and amorphous) solar PV material scale-up processing methods dye-sensitized) development and scale-up processing
Locally fabricated a 2-kW small wind turbine system for water pumping
Micro-siting and modelling tools for Small wind power plant Open-field testing
decentralized off-grid applications demonstration plants
New materials for wind Alternative materials for generator Low-energy and/or low-cost recycling
turbine blades components (permanent magnet, methods for rare earth elements in
rotor, stator, etc.) commercial magnetic materials
Tidal Current Energy Integrated Resource Ocean Renewable Energy Research Facility
Assessment and Spatial Planning Tool (ORE) / (On-going)
OCEAN R&D AREAS
Ocean energy
Integration to specific demonstration plants
applications (potable water
production, ice production, early Ocean energy laboratory testing
warning systems, etc.) facilities and open sea pilot testing sites
Balance-of-system components (e.g. floating structures, Submarine power cable Corrosion mitigation
power converters, controllers, etc.) design and transmission (HVDC or DC-DC)
development for ocean energy harvesting devices Biofouling mitigation
Ocean marine current / wave / tidal / thermal Low-flow ocean Non-electrical power
/ salinity gradient energy harvesting device turbine design and transmission (water or
design and development development hydraulics)
The MHP test facility aims to validate turbine performance The project aims to determine the techno-economic viability
available in the local market and to cater MHP researchers and sustainability of micro-grid where micro-hydro as primary
innovating MHP components The test facility capacity can source.
accommodate up to 20 KW.
MICRO-HYDRO R&D AREAS
• Performance testing standards Battery research using indigenous materials i.e. copper,
• Durability test based on local weather iron, nickel based materials / combinations
conditions
Research Proposal Evaluation
Process & Criteria
Project Proposal Flow of Evaluation
Submission of Proposal Project Manager
Call Conference Call for Proposals (E-proposal System)
Eligibility Check
Electronics Industry
The PCIEERD M&E Protocol
Activities Number of Days Schedule for 2019
(working days)
Roadmapping every 5 years, review every January to June
year (new/reviewed roadmaps)
Conference on Call for Proposals 7 July
Call for Proposals 25 days June 28-August 2
(extended to August 15)
EVALUATION PROCESS (max of 40 days)
PM evaluation (check for duplication, initial 5 Aug. 16-Aug. 23
technical evaluation)
PMT Evaluation 7 Aug. 23 & 27
Technical Review (through TPEC) 7 Sept. 10-11
For the proponents to revise 7 Sept. 12-16
Governing Council 7 Sept. 19
DOST EXECOM 7 Sept. 23
40 27 days
NSDB
▪ Identify the NEED
➢Clear understanding of the specific need to be addressed
▪ Indicate compelling SOLUTION
➢Details of the proposed solution
▪ Make DIFFERENTIATION
➢Advantages/Unique Selling Proposition
▪ Maximize the BENEFITS
➢Quantify
Contact
DR. ENRICO C. PARINGIT
Executive Director
Philippine Council for Industry, Energy and
Emerging Technology Research and
Development (PCIEERD)
Department of Science and Technology
(DOST)
4th & 5th Levels, Science Heritage Building,
DOST Compound,
Gen. Santos Ave., Bicutan, Taguig City
Thank you
https://www.facebook.com/pinoyscience
PLEASE VISIT OUR WEBSITE:
http://www.pcieerd.dost.gov.ph