Project Title:
Semester Project To Make A Projector
01.Introduction:
A projector or image projector is an optical device that projects an image (or moving images) onto a
surface, commonly a projection screen. ... These earlier types of projectors were mostly replaced with
digital video projectors throughout the 1990s and early 2000s, but old analog projectors are still used at
some places.
02.Aims And Objectives:
A projector or image projector is an optical device that projects an image (or moving images)
onto a surface, commonly a projection screen. Most projectors create an image by shining a
light through a small transparent lens, but some newer types of projectors can project the
image directly, by using lasers.
We all know the “regular” uses for projectors. We’ve used them in classrooms and conference
rooms . We’ve sat in dark theaters while our favorite movies were projected onto huge screens.
Now, even using them in our homes for entertainment is getting commonplace.
03.Literature View:
A projector or image projector is an optical device that projects an image (or
moving images) onto a surface, commonly a projection screen. ... These earlier
types of projectors were mostly replaced with digital video projectors throughout
the 1990s and early 2000s, but old analog projectors are still used at some places.
04.SELECTION OF MATERIAL:
1:WOOD
2:TORCH
3:WIRE
4:BUTTON
5:BATTERY
6:TRANSPARENT SHEET
7:TOURQE DC MOTOR
8:POTENTIOMETER
9:BULB
05.Using of Shop:
1:Fitting shop
2:Carpentary shop
3:Electric shop
06.METHODOLOGY(SEQUENCE OF OPERATION)
1:Take a wood and check the all dimensions with steel rule.
2:cut into different pieces of wood.
3:clean then pieces of wood with jack plane
4:Then we have done fitting of different pieces.
5:Then we join the wires , button,potentiometer with the motor and
battery.
6:Then we cut transparent sheet into circle shape and draw different
shapes of things on it.
7:Then we fix it on the motor.
07.Write your self what work You have done on this
project
Muhammad Faisal :purposal and guidness
Al Asad:Electric work
Farhan ullah:Fitting
Sadam hussain:cutting
Result:
After Collecting diffren materials and apply diffrent techniques we
achieved our desired product.
Cost:
22OO/-Rs
Reference:
www.projectormaking.com(youtube)