Professional Documents
Culture Documents
IR333C/H0
Features
․High reliability
․2.54mm lead spacing
․Low forward voltage
․Good spectral matching
to Si photodetector
․High radiant intensity
․Pb free
․The product itself will remain within RoHS compliant version.
Descriptions
EVERLIGHT’s infrared emitting diode (IR333C/H0)
is a high intensity diode, molded in a water clear plastic
package.
The device is spectrally matched with phototransistor, photodiode
and infrared receive module.
Applications
․Free air transmission system
․Optoelectronic switch
․Floppy disk drive
․Infrared applied system
․Smoke detector
Rank
Condition:IF=20mA
Unit:mW/sr
Bin Number L M N
Min 5.60 7.80 11.00
Max 8.90 12.50 17.60
140 100
120
80
100
60
80
60 40
40
20
20
0 0
-40 -20 0 20 40 60 80 100 880 900 920 940 960 980 1000 1020 1040
980 10
960
10
940
10
920
900 10
-25 0 25 50 75 100 0 1 2 3 4
1000
100
10
1
0 1 2 3 4
10 10 10 10 10
15 1.3
10 1.2
5 1.1
0 1
25 50 75 100 120 25 50 75 100 120
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without
EVERLIGHT’s consent.