Professional Documents
Culture Documents
Trimaran Hullform Hydrodynamic Analysis PDF
Trimaran Hullform Hydrodynamic Analysis PDF
Sunny Verma, Md.Kareem Khan, Shiju John, PC Praveen, Manu Korulla & PK Panigrahi
Scientists, Naval Science & Technological Laboratory, Visakhapatnam, India
It is expected that, there will be large demand for trimaran hull forms to meet
multi-mission defense requirements of world in the recent future. Multi-mission
requirements include a platform that is fast, agile & versatile with multirole
capability such as anti-submarine warfare, surface surveillance, mine
countermeasures, littoral and deep sea combat capability with modular mission
payloads etc. Hydrodynamically these platforms possess powering and seakeeping
advantages, shallow draft operability and excellent maneuverability. Hydrodynamic
model tests and CFD studies were carried out to design and evaluate the performance
of a 3000 tonne trimaran configuration at NSTL. A brief description of the
hydrodynamic activities carried out is highlighted in the present paper.
1. INTRODUCTION
Fig 1: Courtesy: Hydrodynamic model test at High Speed Towing Tank, NSTL
The concept of a trimaran hull form was first noticed in the ancient outrigger
canoes of Indonesia [1], which consisted of a slender main hull and two smaller
outriggers. In the late decades of the 20th century, the trimaran form was used for
high performance racing sail yachts with great success.Trimarans seen today are used
as passenger ferries, Ro-Ro vessels and pleasure boats. Naval applications focus on
multirole and littoral combat vessels with advanced propulsor systems like waterjets
and podded propulsion. Existing naval trimaran designs such as Littoral combat vessel
LCS2 (United States), futuristic multi mission frigate -F2M2 (Spain), X3K
(Indonesia), Multi role vessel - MRV80 (Australia) promotes the capabilities of such
platforms.
2. LITERATURE REVIEW
The concept of a trimaran with slender monohull stabilized by two side hulls
of very low displacement was introduced by University College of London (UCL) and
the UK Ministry of Defence s Defence Evaluation and Research Agencies (DERA)
QinetiQ hydrodynamic centre at Haslar. The joint exploration between UCL designs
and QinetiQ Haslar tank tests on trimaran warships was considered so sufficiently
promising that a 2/3 scale trimaran, Research Vessel Triton, commissioned by DERA,
was designed and built as a technology demonstrator for the Royal Navy s Future
Surface Combatant [4]. The 1,200 ton RV Triton was ordered from Vosper
Thornycroft in 1998 and delivered in August 2000, when it commenced an extensive
series of trials. The world s largest trimaran ferry, Benchijigua Express, a 127m high-
speed vehicle-passenger ferry delivered by Austal in 2005, operates at a speed of 40
knots with a capacity of 1,350 passengers and 400 cars on the routes between the
Canary Islands, Spain [6].The potential of military application existing in the Austal
trimaran attracted the U. S. Navy , and a team led by Austal and the U.S. military
supply company General Dynamics was selected in 2005 to provide a trimaran hull
form based design for the U.S. Navy s Littoral Combat Ship (LCS) project. The class
prototype for the independence-class littoral combat ships based on this design, USS
Independence (LCS- 2) was delivered in 2010. More recent naval trimaran
platforms/concepts are F2M2 (Spain), X3K (Indonesia) and future trimaran multi role
vessel MRV80 (Australia).
The basic objective is to develop a trimaran hull form that can achieve the
desired speed, while ensuring less power consumption and maintaining high fuel
efficiency. Various steps followed in the hull form design process are shown in the
block diagram given below (Fig 2). Literature review reveals that the trimaran hull is
a slender one with main hull having L/B ratios 9-12 and side hull having L/B ratios
10-15. The stern is wide and generally of transom type. However, based on the
literature a parent ship analysis of the three different trimaran hull forms was
performed to get the knowledge about the various parameters. The results of the
analysis are presented in Table 1.
The findings of the literature review and parent ship analysis encouraged performing a
parametric study on the NPL series and fast displacement hull form series for the
main hull of trimaran configuration. High speed Towing Tank at NSTL has model test
data base for fast displacement as well as NPL hull forms consisting of 9 ships. These
test data were extrapolated for a main hull displacement of 2600 tonnes and arrived at
residuary resistance coefficient (Cr) for different Froude number (Fn).
Parametric studies lead to reasonable conclusions in choosing NPL as base
hull form as its behaviour is similar to other fast
ast displacement hull forms upto Froude
number 0.4 (even though it has slightly higher Cr) Cr).However
.However more benefits are seen
beyond Froude number 0.4 as the hump in Cr is reduced profoundly there thereafter.. This is
an advantageous feature for the present trimaran hull form desig
design. On the basis of the
parametric studies and analyzing other requirement like wide aft, it was decided to
adopt the
the NPL as the baseline hull for trimaran
trimaran (both main and side hulls). The initial
main and side hull displacements were fixed to 2600 tonnes and 200 tonnes each
respectively. To arrive desired dimensions Lackenby technique was applied on the
NPL baseline hhull
ull (L/B 9.5) and initial hull forms (main & side)
side were developed. The
side hull length is about 52% of main hull. The details of these hull forms are gigiven
ven in
Fig 3 and Tab
Table 2.
((3a)
((3b)
In generally
enerally, transom stern resistance which arises due to the presence of high
pressure flow filed changes generated due to the presence of transom stern is not
considered for wave pattern resistance estimation. However transom stern resistance
has to be accommodated for as the transom is not always wet and there is tendency for
high pressure field changes at that location.
location Most of the times RWP + R BD is referred
as RR , residuary resistance.One
resistance One should note that viscous scaling has to be applied for
R BD which is normally skipped in most of the model - ship extrapolation procedures
for hull with transom stern.
stern Hydrodynamic study was carried out for main hull and
side hull separately in the first phase to understand the individual hull form behaviour.
behaviour.
The stagger & separation of side hulls relative to the main hull is an important aspect
of trimaran
trimaran platform design as it greatly affects the wave interference between the
hulls and thus the over
overall
all resistance characteristics. The convention for stagger &
separation is defined in the Fig 4. Optimization
ptimization studies for different combinations of
stagger and separation for a Froude no. range of 0.1-0.7
0.1 were carried out to determine
the effect of relative position of side hulls w.r.t. main hull on the wave making
resistance. The test matrix for the hydrodynamic study made is presented in Table 33.
A series of CFD analysis using Shipflow and model tests were conducted on a scaled scale
model of the trimaran at High Speed Towing Tank (500m x 8m x 8m) for all these
nine conditions.
conditions Figures showing flow field captured throughthrough CFD anaanalysis
lysis along
with pphotographs
hotographs of corresponding
correspon g model tests for a full scale speed condition of
35knots is given at Fig 55.. The results of main and side hull individually were utilized
in the derivation of percentage
perce interference resistance (%
% R)R as stated in equation
3.2
3.2.
Description Trimaran
L/ (1/3) 8.82
B/T 7.5
CB 0.540
CP 0.706
Fig 66: Optimised trimaran configuration (R1)
Shipflow analysis for the wave pattern resistance coefficient using boundary
element method gave encouraging results for a Froude number (Fn) range of 0.3 0.3-0.7
0.7
when compared with the model tests as shown in Fig 7. 7. The wave patter resistance
coefficient ((C
CWP) showed a hump nature at Fn close to 0.3 & 0.5,, which is common
for such hull forms. The results before 0.3 Fn were not depicting realistic
phenomenon and is understood to be the limitation of software. Since, for the same
ship speed
speed, side hull operates at a higher Fn, the CWP for the side hull is considered for
a larger range of Fn. It is observed that test case R1 possess minimum wave pattern
resistance for the desired range of Fn..
Model tests
test results as presented in Fig 8 also confirmed the results of
computational study carried out using Shipflow. Test cases R3 & R6 which
corresponds to 30% stager had higher total resistance coefficient ((CT) values
compared to 15% & 0% stagger for all the separations considered. Again R1 was the
best among all the test cases w.r.t. resistance characteristics. Study also confirmed that
side hull with 0% stagger performed better than any other stagger location. The reason
for better performance with 0% stagger of side hulls is due to minimal interference of
main hull to side hull wave pattern system. Also transom stern interaction of main
hull with that of side hulls is least for this stagger location.
6. CONCLUSIONS
[1] Hornell, J. Water Transport, Origins and Early Evolution. Cambridge University
Press. 1946.
[2] Pattison, D. R. Trimaran Ship. RINA Spring Meeting, 1994.
[3] Gifford, E. W. H. The Design, Testing and Operating of Low-wash, High-speed
Trimaran Passenger Ferries to Class VB. Internal Symposium, RINA, London,
1995.
[4] RINA International Conference on RV Triton: Trimaran Demonstrator Project
Solent Conference Centre, Southampton UK, April 2000.
[5] North West Bay Ships website: www.nwbs.com.au/55.htmal
[6] Austal website: www.austal.com
[7] Numerical And Experimental Study Of Wave Resistance For Trimaran Hull
Forms, Thomas Mynard Et Al, Australian Maritime College
[8] Experimental Study For The Optimization Of Side-Hull Location For Resistance
Of A Trimaran , Jianjun Qi, Doctoral Thesis, Stevens Institute Of Technology
[9] Numerical Computation Of Multi-Hull Ship Resistance And Motion, Hongxuang
Peng, Doctoral Thesis, Dalhousie University
[10] Experimental Study On The Efficiency Of Trimaran Configuration For High-
Speed Very Large Ships, Amedeo Migali Et Al, Fast 2001: 4th 6th September
2001, Southampton, Uk
[11] High-Speed Trimaran Drag: Numerical Analysis And Model Tests , Igor Mizine
Eta Al, Journal Of Ship Research, Vol. 48, No. 2, September 2004
[12]Large Trimaran Concepts And Technology Elements, Dr. Igor Mizine, Csc
Advanced Marine Center, Presentation, Joint Sd-5 Panel And International
Hydrofoil Society Meeting Apr1, 2008
[13]Bare Hull Resistance Experiments And Ldv Wake Surveys For A Trimaran
Concept Of A Heavy Air Lift Seabasing Ship (Halss) Represented By Model
5651 , Daniel J. Lyons Et Al, Naval Surface Warfare Center, Carderock Division
[14]Wave Making Resistance Characteristics Of Trimaran Hulls, Zafer Elcin,
Doctoral Thesis, Naval Postgraduate School, Monterey, California
[15] Design and Operation of Trimaran ships , International Conference, RINA, 2004
[16] An investigation into the resistance/powering and seakeeping characteristics of
river catamaran and trimaran , Murdijanto et al , Makara,Teknologi, vol. 15, no.
1, April 2011: 25-30
[17] Hydrodynamic Optimization of Multihull Ships , Hyunyul Kim and Chi Yang
11th International Conference on Fast Sea Transportation FAST 2011, Honolulu,
Hawaii, USA, September 2011
[18] Interference Resistance of Multi-Hulls per Thin-Ship Theory , RonaldW. Yeung ,
20th International Workshop on Water Waves & Floating Bodies, Longyearbyen,
Spitsbergen, May 29-Jun 1, 2005.
[19] Navantia design for futuristic multirole frigate , Spanish navy F2M2 , internet
source