Professional Documents
Culture Documents
Bevpor MH PDF
Bevpor MH PDF
BOTTLED WATER
Filter Cartridges
Features Benefits
• Validated retention to industry • Ensures the safety of the water
regulated organisms prior to bottling
• Inert materials of construction • Protects the purity and essential
characteristics of the source water
• Easily integrity tested in situ
• Assures performance of the
• Integral depth pre-filtration filtration
layer
• Increased throughput to blockage
• High filtration area
75
Differential Pressure (psi)
1.0
50
0.5
25
0 0
0 5 10 15 20
BOTTLED WATER
Specifications
Materials of Construction Effective Filtration Area (EFA) Integrity Test Data
Filtration Membrane: Polyethersulphone 10¨ (250 mm) Up to 0.8 m2 (8.61 ft2) All filters are flushed with pharmaceutical
Prefilter Layer: Polyester grade purified water prior to despatch. They
Upstream Support: Polyester Cleaning and Sterilization are integrity tested to the following limits:
Downstream Support: Polyester BEVPOR MH cartridges can be repeatedly
Inner Support Core: Polypropylene steam sterilized in situ or autoclaved at up Diffusional Flow Micron Rating
Outer Protection Cage: Polypropylene to 130 °C (266 °F). They can be sanitized with Test Parameters 0.20 0.45
End Caps: Nylon hot water at up to 90 °C (194 °F) and are
End Cap Insert: 316L Stainless Steel compatible with a wide range of chemicals. Test Pressure (barg) 2.4 1.7
Standard o-rings: Silicone /EPDM Please refer to our Clean in Place support Test Pressure (psig) 40.6 25.0
Europe: ✆ +44 (0)191 4105121 dhprocess@parker.com | North America: ✆ toll free: +1 877 784 2234 dhpsales.na@parker.com | www.parker.com/processfiltration
guide or contact your local Parker Max Diffusional
Food Contact Compliance representative for more information. Flow per 10¨ (ml /min) 21.0 21.0
Materials conform to the relevant
requirements of 21CFR Part 177, Retention Characteristics Manufacturing Traceability
current EC1935 / 2004 and current USP 0.2µm BEVPOR MH filters have been Each filter element displays the product
Plastics Class VI - 121 °C and ISO10993 validated to provide sterile effluent after description, product code and lot number.
equivalents. bacterial challenge testing following ASTM Additionally each filter module displays a
F838-05 methodology on 10” cartridges with unique serial number providing full
Recommended Operating Conditions more than 107cfu per cm2 using manufacturing traceability.
Up to 70 °C (158 °F) continuous operating Brevundimonas diminuta.
temperature and higher short-term
temperatures during CIP to the following In addition, challenges with the following EU
limits: regulated organisms have been performed.
Temperature Max Forward dP
°C °F (bar) (psi) Organism LRV when challenged with a
minimum of 107 cfu per cm2
20 68 5.0 72.5
40 104 4.0 58.0 0.20 0.45
60 140 3.0 43.5
80 176 2.0 29.0 Serratia marcescens FR FR
90 194 1.0 14.5 Escherichia coli FR FR
>100 (steam) >212 (steam) 0.3 4.0 Enterococcus faecalis FR FR
Clostridium perfringens FR FR
Pseudomonas aeruginosa FR FR
Brevundimonas diminuta FR 5
*FR - Fully retentive during challenge
Ordering Information
BMH - - A
Code | Length (Nominal) Code | Micron Code | Endcap (10 inch) Code | O-rings
Parker domnick hunter has a continuous policy of product development and although the Company reserves the right to change specifications, it attempts to keep customers informed of any alterations. This publication is for general information only and customers are requested to contact
our Process Filtration Sales Department for detailed information and advice on a products suitability for specific applications. All products are sold subject to the company’s standard conditions of sale. DS_BW_08_06/12 Rev. 1A