Professional Documents
Culture Documents
CONTENTS Page
1. General characteristics . . . . . . . . . . . . 1
2. Presentation . . . . . . . . . . . . . . . . . . . . 2
3. Positioning . . . . . . . . . . . . . . . . . . . . . . 2
4. Technical characteristics . . . . . . . . . . . 2
5. Installation . . . . . . . . . . . . . . . . . . . . . . 2
6. Dimensions . . . . . . . . . . . . . . . . . . . . . 2
7. Standard RJ 45 connection . . . . . . . . . 2
8. Standards and approvals . . . . . . . . . . 3
9. Performance . . . . . . . . . . . . . . . . . . . . 3
0 335 67/68
Universal mounting on any cabinet or enclosure. No special tool is required to connect the connectors.
Panels ensure automatic earthing of each connector. - Connector simply snaps onto the front of the panel
The patch panels are 19’’ format - 1U. - Fastening of the label holder faceplate ensures a neat finish for the
6 connectors
They are equipped with: No need for cable ties: the cable is held in place in the cable guide.
- 4 units of 6 quick-fixing RJ 45 Cat. 6 connectors (no tools required), with
568 A/B marking
- Soluclip accessory for automatic fixing (without screws) to the uprights
in cabinets and enclosures
- Rear cable guide to hold cables during maintenance
2. PRESENTATION
CONTENTS 1/4
LCS2 RJ 45 Cat. 6 HD panels and Cat. No.(s): 0
335 67/68
units
5. INSTALLATION 7. STANDARD RJ 45 CONNECTION (continued)
RJ 45 connectors are equipped with a locking nut. They do not require
L1 a special tool and can be re-wired if a mistake is made.
L3
1 OK
L1 90 m
L2 L2 5 m
L3 5 m
NO
6. DIMENSIONS 2
Patch panel Cat. No. 0 335 67/68 43.8
FTP
482.6
118.0 78.5 Simultaneous connection of the strands is thus assured.
This system allows you to spread pairs with ease before fitting them
onto the connector.
Spreading the cables ensures that a pair-breakage distance of 13 mm
is kept between each pair.
Spreading pairs at 90° to the cable ensures the best possible
performance.
7. STANDARD RJ 45 CONNECTION
Takes the following plugs: 3 4
RJ 11 (4 contacts), RJ 12 (6 contacts), RJ 45 (9 contacts).
EIA/TIA 568 A and B dual colour code on terminals:
- UTP 8 contacts ID no.: SB51
- FTP 9 contacts ID no.: SB52
Permissible conductors:
- Single-core: 0.5 to 0.65 mm, AWG 22 to 26 8. STANDARDS AND APPROVALS
- Multicore: AWG 26
- Polyethylene conductor insulation: maximum Ø on insulation 1.58 mm Conforms to standards: ISO/IEC 11801
CENELEC EN 50173
ANSI/TIA 568 C.2
ISO/IEC 60603-7 series
CONTENTS 2/4
LCS2 RJ 45 Cat. 6 HD panels and Cat. No.(s): 0
335 67/68
units
9. PERFORMANCE 9. PERFORMANCE (continued)
9.1 Performance of components (RJ 45 connectors) 9.1 Performance of components (RJ 45 connectors)(continued)
Return loss FEXT (Far end Crosstalk Attenuation)
0 dB 0 dB
20 20
40 40
60 60
80 80
100 dB 100 dB
1 MHz 10 100 300 1 MHz 10 100 300
0.1 20
0.2 40
0.3 60
0.4 80
0.5 dB 100 dB
1 MHz 10 100 300 1 MHz 100 200 300
0 dB 0 dB
20 20
40 40
60 60
80 80
100 dB 100 dB
1 MHz 10 100 300 1 MHz 100 200 300
CONTENTS 3/4
LCS2 RJ 45 Cat. 6 HD panels and Cat. No.(s): 0
335 67/68
units
9. PERFORMANCE (continued) 9. PERFORMANCE (continued)
9.2 Performance of permanent link with F/UTP cable (continued) 9.2 Performance of permanent link with F/UTP cable (continued)
NEXT (Near end Crosstalk Attenuation) ELFEXT (Equal Level End Crosstalk)
0 dB 0 dB
20 20
40 40
60 60
80 80
100 dB 100 dB
1 MHz 100 200 300 1 MHz 100 200 300
20 20
40 40
60 60
80 80
100 dB 100 ns
1 MHz 100 200 300 1 MHz 100 200 300
20
40
60
80 dB
1 MHz 100 200 300
CONTENTS 4/4