Professional Documents
Culture Documents
Technical Announcement
Global Service Department
Contents
2 Maintenance Policies.......................................................................................................................2
2.1 Maintenance Policies for ASCs......................................................................................................................... 2
2.2 Maintenance Policies for HLRCs...................................................................................................................... 6
None...................................................................................................................................................................6
3 FAQ...................................................................................................................................................6
3.1 Open the main MIC maintenance operation video instruction.......................................................................... 6
3.2 Handset Mainboard Replacement issue............................................................................................................. 6
NO.:
Technical Announcement
Global Service Department
Technical Announcement
Global Service Department
Checking the PCBA laser engraving QR code: Compare PCBA laser engraving QR code
information with that in Table 1-1 to obtain the storage of the PCBA.
2 Maintenance Policies
To improve maintenance quality and customer satisfaction, the following London maintenance
regulations and restrictions are imposed on ASCs and high-level repair centers (HLRCs).
Maintenance Method
No. BOM Code Fault Description In-Warranty Out-of-Warranty Precaution
Maintenance Maintenance
Faulty receiver Replace the front Replace the front ASCs are not
3 97070TER cover assembly cover assembly allowed to
decorating part
that is with the that is with the disassemble the
Technical Announcement
Global Service Department
Maintenance Method
No. BOM Code Fault Description In-Warranty Out-of-Warranty Precaution
Maintenance Maintenance
battery. battery. front cover
assembly without
authorization.
Replace the
4 97070TEC Motor failure Replace the motor. /
motor.
Replace the front
cover assembly Replace the
5 24022376 Battery failure /
that is with the battery.
battery.
Replace the Replace the
Proximity sensor
6 97070UAF proximity sensor proximity sensor /
failure
sub-board. sub-board.
Replace the Replace the
7 97070TDT Speaker failure /
speaker. speaker.
Fingerprint sensor Replace the rear Replace the rear
8 97070TEW /
module failure cover. cover.
Replace the flash Replace the flash
9 97070TCH Flash failure /
assembly. assembly.
Faulty side button Replace the side Replace the side
10 97070TED /
FPC button FPC. button FPC.
Replace the rear Replace the rear
11 / Side button failure /
cover. cover.
USB connector Replace the Replace the USB
12 14241281 /
failure PCBA connector.
Replace the rear Replace the rear
13 97070TDN Rear camera failure /
camera. camera.
Front camera Replace the front Replace the front
14 97070TDR /
failure camera. camera.
Replace the RF Replace the RF
15 97070TFH Faulty RF cable /
cable. cable.
Depending on
Replace the card Replace the card
16 the specific Faulty card tray /
tray. tray.
model
Faulty battery BTB Replace the
Replace the
17 14241048 connector on the battery BTB /
PCBA.
PCBA connector on the
Technical Announcement
Global Service Department
Maintenance Method
No. BOM Code Fault Description In-Warranty Out-of-Warranty Precaution
Maintenance Maintenance
PCBA.
Faulty display FPC
BTB connector and
Replace the Replace the
18 97070TGD front camera BTB /
PCBA. PCBA.
connector on the
PCBA
Faulty secondary
Replace the Replace the
19 97070TCV microphone on the /
PCBA. microphone.
PCBA
Faulty rear camera
Replace the Replace the
20 97070TGK BTB connector on /
PCBA. PCBA.
the outer side
Faulty rear camera
Replace the Replace the
97070TFR BTB connector on /
PCBA. PCBA.
the inner side
Replace the Replace the
21 97070TGF Faulty headset jack /
headset jack. headset jack.
Faulty Replace the
Replace the
22 97070TFU SIM/microSD card SIM/microSD card /
PCBA.
holder holder.
Replace the Replace the
23 / Faulty springs /
PCBA. springs.
Faulty shielding Replace the Replace the
24 / /
covers shielding covers. shielding covers.
Faulty graphite Replace the Replace the
25 97070TFF /
sheet graphite sheet. graphite sheet.
Faulty rear camera
26 97070TFA Replace the lens. Replace the lens. /
lens
Replace the rear Replace the rear
27 97070TEV Faulty rear cover /
cover assembly. cover assembly.
28 97070TDT Faulty Horn Replace the Horn Replace the Horn /
Faulty fingerprint
Replace the Replace the
30 97070TGD sensor BTB /
PCBA. PCBA.
connector
Faulty front camera Replace the Replace the
31 97070TGL
BTB connector PCBA. PCBA.
Technical Announcement
Global Service Department
Maintenance Method
No. BOM Code Fault Description In-Warranty Out-of-Warranty Precaution
Maintenance Maintenance
The following table lists the materials that cannot be reused once removed.
Technical Announcement
Global Service Department
3 FAQ
3.1 Open the main MIC maintenance operation video instruction
Dot Welding Maintenance Operation video (card holder, MIC):
http://consumer-tkb.huawei.com/tkb/#!tkbv2/resource/document/showDetail.html?resourceId=4942
28
Technical Announcement
Global Service Department
Antel / Entel /
LDN-L03 Latin America London-L03 8.0.0.143(C771CUSTC771D1)
Altice / WOM