Professional Documents
Culture Documents
GENERATORS
For Multi-Shaft or Single-Shaft Operation
The GE generator product line is divided into three classifications based on the cooling method: air, hydrogen, and water. Air cooling,
the least complex method of cooling, is preferred for lower output ratings and has the added benefit of ease of maintenance. The
hydrogen cooled generator is completely sealed for operation with hydrogen gas as the cooling medium. The water cooled generator
combines the architecture of a hydrogen cooled unit with direct armature winding cooling via deionized water passed through the
stator bars. This enhances power density, which provides higher output and industry-leading efficiency in a smaller package.
•G
E GEN-A (air cooled) generators are an Armature Insulation System
ideal choice for power system applications 4 M
icapal III* stator bar insulation
that demand simple, flexible operation. technology enables higher power
density with advanced voltage stress
• GE GEN-H (hydrogen cooled) generators, and thermal conductivity capabilities for
with low gas density, high specific heat, greater armature performance. H81 370 MW
50 Hz
GEN-H Up to 99% Efficiency
60 Hz
50 Hz
GEN-A Up to 99% Efficiency
60 Hz H85 465 MW
(50 Hz, 0.80 PF)
0 100 200 300 400 500 600 700 800 900
Output (MVA)