Professional Documents
Culture Documents
PN 16 – PN 160
LL
Application
Condensate discharge without banking-up,
even at varying o perating conditions and back
pressure. Automatic air-venting (Duplex design).
Also for the discharge of cold condensates and
distillates, and for draining gas and compressed
air systems (Simplex design).
UNA 45/46/46A horizontal
1.4408 A351-CF8M
PN 40 / 1.4404 / F316L / 40 / 450 / 27.6 / 300 25.0 / 4504)
UNA 46A 32
CL300 1.4408 CF8M 41.4 425 26.1 / 300 23.9 / 4254)
UNA 27 h
DN 25 – 50 1) Limits for body/cover. Functional requirements may restrict the use to below the limits quoted.
For full details on limiting conditions depending on end connection and type of regulator see data sheet.
2) ASTM nearest equivalent is stated for guidance. Physical and chemical properties comply with EN.
3) These types/materials are only available for design h for installation in horizontal lines.
4) If the operating temperatures exceed 300 °C intercrystalline corrosion may occur. Do not subject the
equipment to operating temperatures higher than 300 °C unless intercrystalline corrosion can be
ruled out.
UNA 38h, DN 15 – 50
Ball-Float Traps UNA
PN 16 – PN 160
Length L1/L2 in mm
Type Connection
L2
Duplex: Flow control + automatic air-venting UNA-Special Flanged EN PN 63 L1 – 565 690 700
Simplex-R: Float control + inner vent pipe PN 63 L2 – 400 435 450
Available Designs
End connection options Control unit
Type Orifice (AO) for max. differential pressure
horizontal vertical angle pattern Simplex Duplex Simplex-R
UNA 14 x1) x1) AO 4, 13 x x x
UNA 16, 16A x1) x1) AO 4, 13, 22 x x x
AO 2, 4, 8, 13, 22, 32,
UNA 45, UNA 46, UNA 46A x1) x1) x x
4 MAX*), 8 MAX*), 13 MAX*), 22 MAX*), 32 MAX*)
UNA 27h x AO 16, 28, 45 x x
UNA 38 x1) x1) AO 50, (64), 80, 80 MAX x x
UNA 39 x AO 80, 110, 140, 140 MAX x
UNA-Special Type 62B, PN 16 x AO 23), 3.54), 5, 10, 16 x6) x2)7)
UNA-Special PN 25 x AO 25), 3.54), 5, 10, 16, 22 x6) x7)
UNA PN 25 x AO 2, 3.5, 5, 8, 12, 16, 22 x 6)
UNA-Special PN 63 x AO 16, 22, 32, 40, 45 x6 )
1) Connection orientation can be changed on site, trap body for horizontal-right available 5) This design is not available for DN 50 mm
2) This design is not available for DN 100 mm 6) Simplex: Flow control + hand vent valve + float lifting lever
3) This design is not available for DN 80 mm 7) Duplex: Flow control + automatic air-venting
4) This design is not available for DN 65 mm
*) DN 40, DN 50, 65
Optional Items for Ball-Float Traps
Item Type
Sightglass cover UNA 45
Cover for installing electrodes UNA 45
Float lifting lever with gasket UNA 45, 46, 46 A, 27 h, 38
Vent valve with gasket (for Duplex design) UNA 45, 46, 46 A, 27 h, 38
Inner bypass (adjustable) UNA 45, 46, 46 A
Ball-Float Traps UNA
PN 16 – PN 160
Capacity Charts
The charts show the maximum hot condensate capacities for the range of float-controlled orifices (AO) and sizes available.
UNA 14, UNA 16, UNA 16A UNA 45, UNA 46, UNA 46A
[lb/h] [kg/h]
15000 7000
6000
2
5000 - AO
10000 0- 65
4000 DN4 4
O8
AO -A 22
8000 5- O 32
40-
6
0 -65 O 13 -A O
6000
3000 DN N4 -A 0-6
5
5 -A
D -65
40 DN4 40-6
DN DN
2000
4000
)
16 3000 4
NA O
orU 5 -A 8
l yf 1000 2 5-2 O 3
(on 2000 O 1 -A O1
-A DN -25 -A
22 5 5 5 O2
2
O 800 5-2 N1 5-2 -A
,A N1 D N1 25 2
-25 D D 5- A O3
15 600
D N1 2 5-
DN 5-
500 D N1
1000
400
800
300
Durchfluss 600
200
Capacity
Capacity
400
Capacity
300
100
200 [bar]
0,1 0,2 0,3 0,4 0,6 0,8 1 2 3 4 5 6 8 10 20 32
Differential pressure [psi]
1,5 2 3 4 6 8 10 20 30 40 60 80 100 200 300 465
Differential pressure
Differenzdruck
Differential pressure
20000
40000
AX
4M
30000 AO AX
5- 8M
4 0-6 AO X
DN
-65
-
X MA
10000 4 0 A 22
20000 DN 1 3M - AO AX
8000
- AO -65 3 2M
-65 40 AO
6000 40 DN -65
-
DN 40
5000 DN
10000
4000
8000
3000
6000
Durchfluss
2000
Capacity
Capacity
4000
3000
1000
2000 [bar]
0,1 0,2 0,3 0,4 0,6 0,8 1 2 3 4 5 6 8 10 20 32
[psi]
Capacity
Differential pressure
Ball-Float Traps UNA
PN 16 – PN 160
Capacity Charts
The charts show the maximum hot condensate capacities for the range of float-controlled orifices (AO) and sizes available.
UNA 38
AX*
8 0M
- AO
50
DN
0
AO 5
1 5 -50 -
DN AO 64
-50 -
DN 15 0 - AO 80
5-5
DN 1
Durchfluss
Capicity
Capacity
Differential pressure
Differenzdruck
Differential pressure
UNA 39
* Traps with small end connection sizes do not
MAX* reach the flowrates indicated in this chart.
140
- AO
50
DN
80
- AO
5-50
DN 1 0
AO 11
-50 -
DN 15 - AO 140
-50
DN 15
Durchfluss
Capacity
Capicity
Differential pressure
Differenzdruck
Differential pressure
Ball-Float Traps UNA
PN 16 – PN 63
Capacity Charts
The charts show the maximum hot condensate capacities for the range of orifices (AO) and sizes available.
Available
orifices (AO)
1 DN 80 AO 16
2 DN 80 AO 10
3 DN 100 AO 16
4 DN 80 AO 5
5 DN 80 AO 3.5
DN 100 AO 10
6 DN 100 AO 5
7 DN 100 AO 3.5
8 DN 100 AO 2
Capacity
Differential pressure
DN 100 AO 3.5
10 DN 100 AO 2
Differential pressure
Ball-Float Traps UNA and UNA-Special
PN 16 – PN 63
Capacity Charts
The charts show the maximum hot condensate capacities for the range of orifices (AO) and sizes available.
Available
orifices (AO)
1 DN 50 AO 22
2 DN 50 AO 16
DN 65 AO 22
3 DN 50 AO 10
DN 65 AO 16
4 DN 65 AO 10
5 DN 50 AO 5
6 DN 50 AO 3.5
DN 65 AO 5
7 DN 65 AO 2
Capacity
Differential pressure
Available
orifices (AO)
1 DN 65 AO 45
2 DN 65 AO 40
3 DN 80 AO 45
4 DN 65 AO 32
DN 80 AO 40
5 DN 100 AO 45
6 DN 65 AO 22
DN 100 AO 40
7 DN 80 AO 32
8 DN 65 AO 16
9 DN 100 AO 32
10 DN 80 AO 22
11 DN 80 AO 16
DN 100 AO 22
Capacity
12 DN 100 AO 16
Differential pressure