Professional Documents
Culture Documents
Not Installed
Installed
REXNORD® ROLLER BEARINGS Rugged. Responsive. Reliable
Rexnord is proud to announce the new Rexnord® ZA 6000 VS. Imperial®
6000 Series SHURLOK™ Adapter Mount Roller
Bearing. Increase your operation’s efficiency and
profitability by reducing installation errors,
maintenance costs, and down time. The
bearing’s rugged and adaptable design make it
excellent for mining, aggregate production,
forest products, and other demanding
applications.
The innovative new Rexnord 6000 Series • 25% greater shaft grip means less vibration and
SHURLOK Adapter Mount Roller Bearing maintenance.
requires less lubrication and is ideal for ISO • Quick release feature allows easy removal for maintenance,
14000 compliance. plus the adapter assembly with Spyglass™ OSS can be
reused.
Shaft mounting errors are a thing of the past
with the breakthrough proprietary Spyglass™ • Positive Locking system maintains shaft mount tightness,
eliminating the need for later mounting inspections.
Optical Strain Sensor (OSS).
• Spyglass OSS takes the guesswork out of installation,
A Positive Locking feature and single housing eliminating damage to the shaft caused by loose mounting.
construction also provide easy installation and
removal, and enable use of inexpensive
commercial grade shafting.
ZAF 6000 VS. SAF
SHURLOK bearings are available in all Rexnord
housings for shaft sizes from 1-15/16 inches to
4-15/16 inches. It also has auxiliary end cap
seal configurations and three interchangeable
seal options to meet unique application needs.
2
Featuring Rexnord’s NEW SHURLOK™ Adapter Mounts
Taking the mystery out of mounting
Auxiliary end caps & three field Self aligning spherical roller bearing
interchangeable seal options ensures provides a total of 3 degrees static and
long bearing life through a full range of dynamic misalignment
applications
Adapter sleeve assembly allows
easy installation/removal, plus
Super-finished raceways provide enables use of commercial grade
a cool running, quiet, high speed shafts
and high load capacity bearing
Y
X
Not Installed
X
Y
Installed
Easy Installation: Simply
tighten the locknut until the
Positive Locking System Mounting locknut utilizing Spyglass OSS
Spyglass™ shows proper indication
Rexnord 6000 Series SHURLOK Roller Bearings are also Available with these Housings
Pillow Block Flanged Units Flanged Cartridge Takeup Units Takeup Assemblies
3
SELF-ALIGNING ROLLER BEARINGS
PILLOW BLOCKS
Page
Adapter Mount ZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adapter Mount ZAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adapter Mount ZAF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Adapter Mount ZAFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Adapter Mount ZEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adapter Mount ZP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Adapter Mount ZPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ZA ZAF
FLANGE BLOCKS
Page
Adapter Mount ZB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adapter Mount ZEF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adapter Mount ZF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Adapter Mount ZFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ZB ZEF
ZBR ZBR
Page Page
Adapter Mount Center Pull ZCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Normal Duty Protected Screw ZMC. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ZCS ZMC
TAKE-UP BLOCKS
Pages
Adapter Mount Center Pull ZT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
ZT ZT
TAKE-UPS
Page Page
Adapter Mount Center Pull ZHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Normal Duty Protected Screw ZNT . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ZHT ZNT
Rexnord
Z Clearance seal Z
Seal Type K Light contact seal K
M Heavy contact seal M
A Z A - 6 207 F
Prefixes
A- Two open auxiliary end cap seals.
B- Two auxiliary end cap seals (one open, one closed)
Z HT 11 - 6 315 - 24
Z Clearance seal
Seal Type K Light contact seal
M Heavy contact seal
Take-up
Frame Size 11 Size Code (from specification page)
Shaft
Diameter 315 3-15/16” — last two digits in 16th of an inch
Take-up
Travel 24 Inches of take-up adjustment
Housing PS
Type
EP2B-IP SYE-NH
EP EP4B-IP FSYE-NH
B F3R-IP F4R-IP
EF EF4B-IP
F F4S-IP
FS F4S-IP Suffix E
BR FC-IP
CS
MC
Bearing
Type 6000 IP-(Imperial) N-(CONCENTRA)
Shaft
Diameter 207 207 2-7/16
Z HT 11 - 6 207
315 - 24
T WSTU-IP TBR-NH
Housing Type
NT TP TRH-NHPA
HT CP
Take-up
Frame Size 11
Shaft
Diameter 315 315 3-15/16
Take-up 24 24 24
Travel
Effective seals are essential to insure satisfactory bearing life All Rexnord interchangeable seals:
in various application environments. Three interchangeable, • provide sealing up to a total of 3 degrees misalignment
standard seals are available to cover a broad range of
conditions. • operate on hardened and ground inner ring extension
All Rex seals assure sealing protection up to a total of 3 degrees • cannot be forced out during relubrication
misalignment in all directions. Sealing is on hardened and • can be easily removed without damage
ground inner ring extensions. Rex seals cannot be forced out
during relubrication, yet can easily be removed when replacing • can be removed without bearing disassembly
or when inspecting grease.
SEAL TYPES
“Z” Seal “K” Seal “M” Seal
Clearance Light Contact Heavy Contact
Denoted with a “Z” prefix in the model number. Substitute prefix “K” for “Z” in model number. Substitute prefix “M” for “Z” in model number.
The standard seal used in the majority of Molded nitrile rubber lip seals Premium elastomer, spring loaded contact lip.
applications. out contaminants. • Protects against liquids and grit
• No frictional drag — generates no • Protects against contaminants • Spring loaded lip assures constant
heat • Handles high speeds contact-even during misalignment
• No speed limitations • Less drag and heat generation than heavy • Molded-in garter spring retains seal
• All metal — no temperature limitations contact seals in housing
• Only available on Size Codes 6-11 • Seals in lubricant on horizontal and vertical
shafts
• Available in viton material
5-Point Protection Plan Seal 3. The large cavity can be left empty to trap dry Auxiliary End Cap Seals
contaminants or filled with grease to repel moisture.
Seal 4. A pliable neoprene gasket provides a
positive static seal between the cap and the
housing.
Seal 5. The primary bearing seal is left in
position to provide a final barrier. The Z, K, or M
seal may be chosen to best fit the application.
E E
45°
C C
L W K L W
J
A
H
G B I
F G
Fixed Block Floating Block
Specifications . . . Radial Load Ratings are Shown on Page 24 — Floating Units Allow for 3/8" Axial Movement
Complete Dimensions in Inches Bolts
Req’d Complete
Shaft Size Block Size Block
Inches No. Code A Net Wt
B C E F G H I J K L W No. Size Lb
Fixed Floating +/-0.005
1-15/16 ZA-6115 ZAS-6115 8-1/8 2-7/16 1-1/4 ... 15/16 2 5/8 10.9
6 2-1/4 6-1/4 3-41/64 1-1/8 4-9/16 2-5/16 2-55/64
1-15/16 ZA-6115-F ZAS-6115-F 8-3/8 3-3/16 1-3/8 1-9/16 13/16 4 1/2 11.7
2-3/16 ZA-6203 ZAS-6203 8-5/8 2-9/16 1-3/8 ... 1 2 5/8 12.9
7 2-1/2 6-3/4 3-49/64 1-5/32 5 2-5/8 3-15/64
2-3/16 ZA-6203-F ZAS-6203-F 8-7/8 3-1/4 1-5/8 1-11/16 13/16 4 1/2 15.3
2-3/8 ZA-6206 ZAS-6206 9-1/8 2-5/8 1-5/8 ... 1 2 5/8 16.1
2-3/8 ZA-6206-F ZAS-6206-F 9-1/4 3-3/8 1-3/4 1-3/4 13/16 4 1/2 16.9
8 2-3/4 7-1/8 4-5/32 1-27/64 5-1/2 2-29/32 3-19/32
2-7/16 ZA-6207 ZAS-6207 9-1/8 2-5/8 1-5/8 ... 1 2 5/8 16.3
2-7/16 ZA-6207-F ZAS-6207-F 9-1/4 3-3/8 1-3/4 1-3/4 13/16 4 1/2 16.6
2-11/16 ZA-6211 ZAS-6211 10-3/8 3-3/16 1-11/16 ... 1-1/8 2 3/4 27.3
2-11/16 ZA-6211-F ZAS-6211-F 10-7/16 3-3/4 2-1/4 1-7/8 15/16 4 5/8 28.0
2-3/4 ZA-6212 ZAS-6212 10-3/8 3-3/16 1-11/16 ... 1-1/8 2 3/4 26.9
9 3-1/4 8-1/8 4-17/32 1-25/64 6-7/16 3-3/8 4-3/32
2-3/4 ZA-6212-F ZAS-6212-F 10-7/16 3-3/4 2-1/4 1-7/8 15/16 4 5/8 26.8
2-15/16 ZA-6215 ZAS-6215 10-3/8 3-3/16 1-11/16 ... 1-1/8 2 3/4 26.0
2-15/16 ZA-6215-F ZAS-6215-F 10-7/16 3-3/4 2-1/4 1-7/8 15/16 4 5/8 26.8
3-3/16 ZA-6303 ZAS-6303 13-3/16 3-7/16 1-7/8 ... 1-5/8 2 7/8 41.8
3-3/16 ZA-6303-F ZAS-6303-F 13 4-1/8 2-1/4 2 1-1/2 4 3/4 42.1
10 3-3/4 10 5-9/64 1-19/32 7-1/2 3-31/32 4-61/64
3-7/16 ZA-6307 ZAS-6307 13-3/16 3-7/16 1-7/8 ... 1-5/8 2 7/8 40.3
3-7/16 ZA-6307-F ZAS-6307-F 13 4-1/8 2-1/4 2 1-1/2 4 3/4 40.6
3-11/16 ZA-6311 ZAS-6311 4-1/8 10-7/8 14-1/4 4-1/8 2-1/8 ... 1-3/4 8-1/2 2 1 58.0
3-11/16 ZA-6311-F ZAS-6311-F 4-1/4 12-1/2 15-1/4 4-1/2 2-5/8 2-1/4 1-1/4 8-5/8 4 3/4 63.0
11 5-31/32 1-47/64 4-9/16 5-43/64
3-15/16 ZA-6315 ZAS-6315 4-1/8 10-7/8 14-1/4 4-1/8 2-1/8 ... 1-3/4 8-1/2 2 1 56.0
3-15/16 ZA-6315-F ZAS-6315-F 4-1/4 12-1/2 15-1/4 4-1/2 2-5/8 2-1/4 1-1/4 8-5/8 4 3/4 61.0
Bore Size=Nominal Shaft Size +.001 - .000
Seals – To Specify K or M seal, replace “Z” in model number with “K” or “M”
Auxiliary End Caps – not available ZAS Series
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
E E
J
30°
C C
W K L W
H A
B
G G
F
Fixed Block Floating Block
Specifications . . . Radial Load Ratings are Shown on Page 24 — Available Expansion on Floating Units – See Below
Complete Bolts Complete Block
Block Dimensions in Inches Req’d Net Wt Lb
Shaft No.
Size Size
Inches Code A B
Fixed Floating C E F G H I J K W No. Size Fixed Floating
+/- Min Max +/-.0075
0.005
2-7/16 ZAF-6207 ZAFS-6207 ... 1/1/4 2 5/8 32.5 32.5
8 3-1/4 8-5/8 9-5/8 4-5-32 1-27/64 11.125 3-1/8 1-1/4 7 3-19/32
2-7/16 ZAF-6207-F ZAFS-6207-F 1-7/8 1-1/8 4 1/2 31 31.5
2-11/16 ZAF-6211 ZAFS-6211 ... 1-7/16 2 3/4 45.5 45.0
9 3-1/2 9-7/8 11 4-17/32 1-25/64 12.594 3-1/2 1 7-5/8 4-3/32
2-11/16 ZAF-6211-F ZAFS-6211-F 2-1/8 1-5/16 4 5/8 44.5 44.5
2-15/16 ZAF-6215 ZAFS-6215 ... 1-7/16 2 3/4 45.5 45.5
9 3-3/4 9-7/8 11 4-17/32 1-25/64 12.594 3-1/2 1-1/4 7-7/8 4-3/32
2-15/16 ZAF-6215-F ZAFS-6215-F 2-1/8 1-5/16 4 5/8 45.0 45.5
3-7/16 ZAF-6307 ZAFS-6307 11-13/16 13-1/8 ... 1-21/32 2 7/8 76.5 76.5
10 4-1/2 5-9/64 1-19/32 15.375 4-11/32 1-21/32 9-3/8 4-61/64
3-7/16 ZAF-6307-F ZAFS-6307-F 11-5/8 13-1/8 2-3/8 1-5/8 4 3/4 75.0 75.5
3-15/16 ZAF-6315-F ZAFS-6315-F 11 4-15/16 12-19/32 14-1/2 5-31/32 1-47/64 16.500 4-3/4 1-25/32 2-3/4 1-53/64 10-5/16 5-43/64 4 3/4 102 104
4-7/16 ZAF-6407Y-F ZAFS-6407Y-F 12 6 14-1/2 16 6-1/4 1-7/8 18.375 5-1/8 2-1/16 3-1/4 1-3/4 11-7/8 6-1/16 4 7/8 143 144
4-15/16 ZAF-6415-F ZAFS-6415-F 13 6 15-5/8 17-3/8 7-15/16 2-1/4 19.703 5-7/8 2-1/16 3-3/8 1-15/16 12-9/16 6-61/64 4 1 207 209
Bore Size = Norminal Shaft Size +.001 - .000
Expansion – Size Code 4-8 is 3/8”. Size Code 9-11 is 1/2”, Size Code 12-13 is 3/4”.
Seals – To Specify K or M seal, replace “Z” in model number with “K” or “M” – “K” only available Size Code is 8-11.
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
E E
30°
C C
L W K L W
A
H
G B I
F G
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
E E
30°
C C
L W K L W
J
A
G B I
F G
Fixed Block Floating Block
Specifications . . . Radial Load Ratings are Shown on Page 24— Available Expansion on Floating Units – See Below
Complete Dimensions in Inches Bolts
Shaft Block Req’d Complete Block
Size Net Wt Lb
Size No. Code A E K
Inches +/- B C F G H I J W No. Size
Fixed Floating 0.005 Fixed Floating Fixed Floating Fixed Floating
1-15/16 ZP-6115 ZPS-6115 2-7/8 1-7/16 ... 4-3/4 4-5/16 2 5/8 13.4 16.1
6 2-1/2 7 3-41/64 1-1/8 1 9 -3/4 1-1/4 2-55/64
1-15/16 ZP-6115-F ZPS-6115-F 4 1 2-1/4 5 5-5/32 4 5/8 15.8 17.7
2-3/16 ZP-6203 ZPS-6203 3-1/8 1-5/8 ... 5-1/4 2 5/8 17.5 21.8
7 2-3/4 7-1/2 3-49/64 1-5/32 1-1/16 10-1/4 1-1/4 5-23/32 3-15/64
2-3/16 ZP-6203-F ZPS-6203-F 4-1/8 1 2-1/4 5-1/2 4 5/8 19.6 22.1
2-7/16 ZP-6206 ZPS-6206 3-3/8 1-3/4 ... 1-3/8 5-3/4 6-3/16 2 3/4 22.2 25.9
2-7/16 ZP-6206-F ZPS-6206-F 4-1/2 1-1/8 2-5/8 1-15/16 6 6-7/32 4 5/8 25.4 28.4
8 3 8-1/4 4-5/32 1-27/64 1-19/64 11-1/4 3-19/32
2-7/16 ZP-6207 ZPS-6207 3-3/8 1-3/4 ... 1-3/8 5-3/4 6-3/16 2 3/4 21.2 25.9
2-7/16 ZP-6207-F ZPS-6207-F 4-1/2 1-1/8 2-5/8 1-15/16 6 6-7/32 4 5/8 24.4 27.4
2-11/16 ZP-6211 ZPS-6211 3-7/8 2-1/16 ... 1-5/8 6-23/32 7-3/16 2 7/8 35.2 43.4
2-11/16 ZP-6211-F ZPS-6211-F 5 1-3/8 2-3/4 1-1/2 7-1/16 7-5/16 4 3/4 38.2 44.2
2-3/4 ZP-6212 ZPS-6212 3-7/8 2-1/16 ... 1-5/8 6-23/32 7-3/16 2 7/8 34.2 42.4
9 3-1/2 9-3/4 4-17/32 1-25/64 1-17/64 13 4-3/32
2-3/4 ZP-6212-F ZPS-6212-F 5 1-3/8 2-3/4 1-1/2 7-1/16 7-5/16 4 3/4 36.5 42.5
2-15/16 ZP-6215 ZPS-6215 3-7/8 2-1/16 ... 1-5/8 6-23/32 7-3/16 2 7/8 33.9 42.5
2-15/16 ZP-6215-F ZPS-6215-F 5 1-3/8 2-3/4 1-1/2 7-1/16 7-5/16 4 3/4 37.2 43.4
3 -3/16 ZP-6303-F ZPS-6303-F 52.0 59.0
10 4 11-1/2 5-9/64 1-19/32 1-15/32 15 5 1-1/2 3 1-1/2 8-1/8 8-3/8 4-61/64 4 3/4
3 -7/16 ZP-6307-F ZPS-6307-F 51.0 57.0
3-11/16 ZP-6311-F ZPS-6311-F 86.0 98.0
11 5 13-1/4 5-31/32 1-47/64 1-39/64 16-3/4 6 1-1/2 3-1/2 1-1/2 9-7/8 10-1/4 5-43/64 4 7/8
3-15/16 ZP-6315-F ZPS-6315-F 84.0 96.0
4-3/16 ZP-6403Y-F ZPS-6403Y-F 110.0 122.0
12 5-3/4 14-3/4 6-1/4 1-7/8 1-3/4 18-1/2 6-3/4 1-3/4 4 1-13/16 11-1/4 11-5/8 6-1/16 4 1
4-7/16 ZP-6407Y-F ZPS-6407Y-F 118.0 119.0
4 15/16 ZP-6415-F ZPS-6415-F 13 6-1/8 16 7-15/16 2-1/4 2-1/64 20-1/4 7-1/2 1-7/8 4-1/4 2 12-1/2 13-1/8 6-61/64 4 1-1/8 171.0 206.0
Bore Size = Norminal Shaft Size +.001 - .000
Expansion – Size Code 6-8 is 3/8”. Size Code 9-11 is 1/2”, Size Code 12-13 is 3/4”.
Seals – To Specify K or M seal, replace “Z” in model number with “K” or “M” – “K” only available Size Code is 6-11.
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
3/16 G
G
SQUARE
Y Y
C C
S L W D L WD B
SQUARE
B
1/8
R
H E H E R
Side View Flange Full Side View Four Hole Round Four Hole Square
With Pilot Flange Block Flange Block Flange Block
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
G
SQUARE
E
C
L W D B
SQUARE
1/8
R
H
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
3/16 E E E
G
SQUARE
C C C
WD B
S WD D
SQUARE
1/8
H R
H H
Side View Flange Full Side View Full Side View Four Hole
With Pilot Flange Block Square Block Square Flange
Fixed Floating Block
Specifications . . . Radial Load Ratings are Shown on Page 24— Available Expansion on Floating Units – See Below
Complete Block Dimensions in Inches Bolts Complete Block
Shaft Size
Size No. H D E S +.000 / -.003 Req’d Net Wt Lb
Inches Code B C G H R W
Fixed Floating Fixed Floating Fixed Floating Fixed Floating No. Size Fixed Floating
4 Bolt Square
1-15/16 ZF-6115 ZFS-6115 6 4-1/16 3-41/64 4-1/2 5-1/8 1-1/8 1 5-5/16 5/8 2-7/8 4-3/8 5-1/8 2-55/64 4 1/2 10.4 12.8
2-3/16 ZF-6203 ZFS-6203 7 4-1/2 3-49/64 5 5-3/4 1-5/32 1-1/16 5-7/8 11/16 3-3/16 5 5-5/8 3-15/64 4 5/8 14.4 18.0
2-3/8 ZF-6206 ZFS-6206 17.8 20.6
8 5-1/32 4-5/32 5-1/2 6 1-27/64 1-19/64 6-7/16 3/4 3-9/16 5-7/16 6 3-19/32 4 5/8
2-7/16 ZF-6207 ZFS-6207 17.5 20.3
2-11/16 ZF-6211 ZFS-6211 29.9 35.4
2-3/4 ZF-6212 ZFS-6212 9 6-1/64 4-17/32 6-1/2 7-1/8 1-25/64 1-17/64 7-3/4 7/8 4-1/4 6-5/16 7-1/8 4-3/32 4 3/4 29.2 34.7
2-15/16 ZF-6215 ZFS-6215 28.9 34.1
3-3/16 ZF-6303 ZFS-6303 40.0 47.0
10 6-23/32 5-9/64 7-3/8 8 1-19/32 1-15/32 8-7/16 1 4-3/4 7-3/8 8 4-61/64 4 3/4
3-7/16 ZF-6307 ZFS-6307 38.0 45.5
3-11/16 ZF-6311 ZFS-6311 71.0 80.0
11 8-5/16 5-31/32 8-7/8 9-1/2 1-47/64 1-39/64 10-9/16 1-1/8 5-7/8 8-7/8 9-1/2 5-43/64 4 1
3-15/16 ZF-6315 ZFS-6315 69.0 77.0
6 Bolt Round (Holes at 60 Deg)
4-3/16 ZF-6403Y ZFS-6403Y 98.0 127
12 6-7/16 6-1/4 9-1/2 11-5/8 1-7/8 1-3/4 15-1/8 1-1/4 6-7/16 10-3/8 11-5/8 6-1/16 6 1
4-7/16 ZF-6407Y ZFS-6407Y 96.0 124
4-15/16 ZF-6415 ... 1-1/8 159.0
13 7 7-15/16 11-3/16 12-9/16 2-1/4 2-1/64 16-1/2 1-1/2 7 11-3/16 12-9/16 6-61/64 6
4-15/16 . . . ZFS-6415 1 184.0
H Pilot – Use Suffix S
Bore Size = Nominal Shaft Size +.001 - .000
Expansion – Size Code 6-8 is 3/8”, Size Code 9-11 is 1/2”, Size Code 12-13 is 3/4”
Seals – To specify K or M seal, replace “Z” in model number with “K” or “M” – “K” only available Size Code 6-11
Auxiliary End Caps – Not available in Size Code 12 ZFS. Also not available in Size Code 6 on the flange side of piloted bearings
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
Y M F
C
S W A
E
3 JACKSCREW HOLES R
PROVIDED
H
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
G E
W S
30°
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
L
¾
HEX K
J
.145
5/8 – 18UNF
LOCKING PIN
G E G
C C
W S Y W
120°
X X X
G1 E
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
E O P
C
L W D H J K K1
T A
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
K Y
A H
I B
G F
Specifications . . . Radial Load Ratings of Bearings — See Page 24
-30 -30
1
1-15/16 ZHT6-6115 -24 ZT6-6115 ZHT6 -24 12,300 6 3-15/16 39-1/2 3-41/64 41-1/2 4 7/8 ... 8-7/16 27 6-9/16 31-1/2 2 5/8 77
8NC
45-1/2 47-1/2 33 37-1/2 86
-36 -36 51-1/2 53-1/2 39 43-1/2 95
-18 -18
-12 -12 27-1/2 29-1/2 70
33-1/2 35-1/2 81
2-3/16 ZHT7-6203
-24
-30
ZT7-6303 ZHT7
-24
-30
13,000 7 4-7/16 39-1/2
45-1/2
3-49/64 41-1/2
47-1/2
4 1-3/16 ... 9 15 6-13/16 20
1-1/4
7NC
2 5/8 90
98
-36 -36 51-1/2 53-1/2 108
-36 -36
-30 -30 46-1/2 48-1/2 33 107
52-1/2 54-1/2 39 119
-36 -36
2-15/16 ZHT9-6215 -30 ZT9-6215 -30 48-1/2 50-1/2 34 39-3/4 174
54-1/2 56-1/2 40 45-3/4 191
4-3/16 ZHT12-6403Y -24 ZT12-6403Y -24 52-3/4 57-3/4 31 2 391
ZHT12 53,300 12 7-1/2 6-1/4 8-7/8 1 5 15-1/2 12-1/4 26 4 1-1/8
4-7/16 ZHT12-6407Y -30 ZT12-6407Y -30 58-3/4 63-3/4 37 4-1/2NC 410
-36
-42
-36
-42
64 3/4
70 3/4
69 3/4
75 3/4
43
49
433
461
-12 -12 44-1/2 49-1/2 20-1/4 29 440
-24 -24 56 1/2 61 1/2 32 1/4 41 2-1/4 496
4 15/16 ZHT13-6415 ZT13-6415 ZHT13 68,000 13 8-1/8 7-15/16 9 -7/8 1 5-1/2 16-3/4 13-1/2 4 1-1/8
-30 -30 62 1/2 67 1/2 38 1/4 47 4-1/2NC 527
-36
-42
-36
-42
68 1/2
74 1/2
73 1/2
79 1/2
44 1/4
50 1/4
53
59
555
587
Bore Size=Nominal Shaft Size +.001 - .000 † Allowable Working Load 2/3 yield strength
Seals - To Specify K or M seal, replace “Z” in model number with “K” or “M”
-"K" only available size code 6-11
NOTE: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
© Rexnord Industries, LLC, 2007 (1070) 21
ZNT TAKE-UP ASSEMBLIES
PROTECTED SCREW TYPE
6000 Series
SHURLOK Adapter Mount
C
O T - TRAVEL O
X Q
Y
B I
Z
F
G
G1
Specifications . . . Radial Load Ratings of Bearings are Shown on Page 24 — Frame Capacity listed in Table Below
Dimensions in Inches
BoltsCom-
Allow- Req’dplete
Shaft
Complete
Take-up
Block
Frame able
Size
Take-
Size
Assembly No.
Blocks
Wt
Assemblies Working
Code
up
T
Inches Only Only LoadH A B C F G1 H I K O Q X Y Z No. Size Net
Lb Travel Wt
Lb
-12 -12 26-1/2 28-1/2 12 25-3/8 47
-18 -18 32-1/2 34-1/2 18 31-3/8 52
-30 -24
3/4
1-15/16 ZNT6-6115 -24 ZN6-6115 13.6 ZNT6 3,000 6 3-5/16 38-1/2 3-41/64 40-1/2 3-1/2 3-13/16 1-3/4 ... 8-1/4 24 7-1/4 1-7/32 37-3/8 3 2 5/8 58
10NC
-30 44-1/2 46-1/2 30 43-3/8 65
-36 -36 50-1/2 52-1/2 36 49-3/8 72
-18 -18
-12 -12 27-1/2 29-1/2 12 26-3/8 51
33-1/2 35-1/2 18 32-3/8 56
-30
2-3/16 ZNT7-6203 -24 ZN7-6203 18.4 ZNT7
-24 3,600 7 4-3/16 39-1/2 3-49/64 41-1/2 3-1/2 3-13/16 1-3/4 ... 8-11/16 24 7-3/4 1-9/32 38-3/8
3/4
10NC
3 2 5/8 68
-36
-30 45-1/2 47-1/2 30 44-3/8 75
-36 51-1/2 53-1/2 36 50-3/8 80
-30
2-7/16 ZNT8-6207 -24 ZN8-6207 22.4 ZNT8
-30
-24 4,400 8 4-3/8 40-1/2 4-5/32 42-1/2 3-1/2 3-15/16 1-3/4 ... 9-1/8 24 8-1/4 1-5/16 39 3/4
7/8
9NC
3 2 3/4 76
-36 -36
46-1/2 48-1/2 30 45 3/4 81
52-1/2 54-1/2 36 51 3/4 87
2-3/4 ZNT9-6212 -24 ZN9-6212 32.7 ZNT9
-24 6,800 9 5-1/8 42-1/2 4-17/32 44-1/2 4-1/2 51/16 2 2 10-5/8 24 9-1/4 1-9/16 42
1
8NC
4 4 3/4 115
-36 -36
2-15/16 ZNT9-6215 -30 ZN9-6215 32.2 -30 48-1/2 50-1/2 30 48 122
54-1/2 56-1/2 36 54 130
-36 -36
-30 50 52-1/4 30 50 156
56 58-1/4 36 56 168
-12
3-11/16 ZNT11-6311-18 -18
-12 36 36-1/2 12 36-5/16 211
ZN11-6311 87.5 42 44-1/2 18 42-5/16 219
-30 -30
7 1-1/4
3-15/16 ZNT11-6315 -24 ZN11-6315 86.5 ZNT11 -24 15,600 11 48 5-31/32 50-1/2 5-1/2 6-3/8 2-1/4 2-1/2 14-1/2 24 12 2-1/16 48-5/16 5 4 3/4 251
7NC
-36 -36
54 56-1/2 30 54-5/16 270
60 62-1/2 36 605/16 281
Bore Size = Nominal Shaft Size +.001 - .000
Seals – To specify K or M seal, replace “Z” in model number with “K” or “M
H Allowable Working Load is 2/3 yield strength
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
Shaded ratings may require additional axial clearance and/or high speed temperature lubricant due to higher operating temperatures.
While bearings are usually selected on the basis of capacity, The basic dynamic load ratings, C, in this catalog have been
there are occasions when they are selected based on calculated increased significantly compared to previous values. Improved
L10 life.The L10 life is defined as the number of revolutions (or surface characteristics have been produced primarily by
hours) that90% of a group of bearings will meet or exceed improving manufacturing and measuring techniques for the race
before evidence of raceway spalling fatigue occurs. The L10 life surfaces. Along with the capability to rotate under higher loads,
can be calculated using the following empirical formula: the static load ratings, C o, have also been increased.
1 X 10 6 C 10 3 With the larger load ratings it may be possible to use smaller
L10 = = life in hours
60 X RPM Pe bearings (size code) for a given application. Caution is advised
in such cases to consider the strength of the shaft and housing –
Where C = C Rating especially when the applied load is not aimed directly into the
Pe = Equivalent Radial Load or Req’d Radial Capacity machined mounting surface.
The choice of the seal for a mounted bearing is often the key to Seal Rating Guide
successful bearing operation and long service life. This SEAL
SELECTION GUIDE incorporates years of Rexnord experience Seal Rating
against the wide variety of conditions encountered on actual Clearance Light Heavy Viton
applications. Following the simple selection procedure outlined Contact Contact
can translate the benefits of that broad experience to individual Z K M M
applications through the choice of the most effective seal. SHAFT POSTION
Horizontal Shaft 4 4 4 4
Vertical Shaft 1 3 4 4
How to Use the Selection Guide OPERATING TEMPERATURE
Below -40°F 4 1 1 2
a. The appropriate seal for a given application may be selected by -40° to 0°F 4 3 3 4
comparing the job application conditions against those listed in 0° to 250°F 4 4 4 4
+250° to +300°F 4 2 2 4
the SEAL RATING GUIDE on this page. Over 300°F 4 0 0 2
b. When more than one application condition is present, the most SPEED
appropriate seal may be selected based on prime sealing for the Equal to/Less than limit below 4 4 4 4
most detrimental condition, and secondary consideration given More than limit below 4 2 1 1
to the other application conditions. VIBRATION/SHOCK
Occasional - Mild 3 4 4 4
c. The details of design, principle of operation, benefits and Occasional - Severe 2 4 4 4
limitations, as well as shaft size range are described as a further Continuous - Mild 1 4 3 4
Continuous - Severe 0 4 3 4
aid to final selection.
ABRASIVE MATERIAL
d. Addition of auxiliary end caps will enhance the primary seal Coarse - Over #10 Mesh 4 4 3 3
performance shown in the chart. Small - #10 to #50 Mesh 3 4 4 4
Fine - #50 to #200 Mesh 1 3 4 4
Very fine - Under #200 Mesh 3 3 4 4
Considerations in Addition to Seal Selection “Caking or buildup” (cement, etc.) 2 4 3 3
MOISTURE
Under certain adverse conditions, other changes should be Splash 2 3 4 4
Rain 2 3 4 4
considered to achieve maximum bearing life: Saturated Atmosphere 1 3 4 4
a. High temperature lubricants where housing or ambient Flooding 0 1 3 3
Pressure Wash 0 1 4 4
temperatures exceed +200F.
FIBROUS MATERIAL
b. Special greases for additional bearing protection where Short Fibers (lint, etc.) 1 3 4 4
excessive water, solvents or chemicals are present. Long Fibers (grass, etc.) 1 3 2 2
c. EP (extreme pressure) greases where high load, high shock CHEMICAL
Acid Fumes and Liquids 1 1 1 4
load, or continuous vibration is present. Alkaline Fumes and Liquids 1 1 1 4
d. Changes in amount of lubricant and cycles for relubrication Application experiences indicate that special consideration should be given to the
periods. addition of Auxiliary End Cap Seals in the shaded areas in the chart.
A A
B
D D G
C C
B
D D
E
F
Figure 2
Rexnord is a registered trademark of Rexnord Industries, LLC. Shurlok and Spyglass are trademarks of
Rexnord. Imperial is a trademark of Baldor-Dodge. Dodge and SKF are trademarks of their respective
companies. All rights reserved.