Professional Documents
Culture Documents
التوقيع:
اإلسم :ا.م.د .ثائر جبار نتيش
التاريخ22/10/2020 :
هامش السيد رئيس القسم بإحالة الطلب الى اللجنة العلمية:
معلومات النتاج
(بحث ،براءة إختراع ،كتاب مؤلف ،كتاب مترجم ،دراسة).... نوع النتاج
Finite element modeling of Residual Stress in Laser Assisted Friction
باللغة اإلنكليزية
Stir Welding عنوان
النتاج
نمذجة العناصر المحددة لإلجهاد المتبقي في اللحام االحتكاكي بمساعدة الليزر باللغة العربية
آخرون
ميكانيك المواد تخصص النتاج
هندسة ميكانيكية – ميكانيك تطبيقي العام /الدقيق
طبيعة النتاج ( نظري،
نظري
عملي،نظري و عملي )
ملخص النتاج وأهدافه
The friction stir welding (FSW) has become an important welding
technique to join materials that are difficult to weld by traditional
1
fusion welding technology. In this technique, the material is not led to
fusion, and the joint is the result of the rotation and movement along the
welding line of the tool that causes softening of material due to frictional
heat and the stirring of the same. In FSW, the temperature does not
reach the fusion value of the materials, and this helps to decrease the
residual stress values. However, due to the higher force involved in the
weld and, thus, the rigid clamping used, the residual stresses are not low
in general in this technique. As the presence of high residual stress
values influences the post-weld mechanical properties, e.g. fatigue
properties, it is important to investigate the residual stress distribution
in the FSW welds
كال هل النتاج مستل من رسالة
أو أطروحة ؟
اسلوب األنجاز
)نظري (عددي
(الطرق المستخدمة نظريا
)وعمليا
الجهات المستفيدة
2
نهاية المدة المخططة
قرار اللجنة العلمية ومصادقة رئيس اللجنة ورئيس القسم
تاريخها رقم الجلسة
القرار يكون ( الموافقة أو عدم الموافقة على تسجيل النتاج )
قرار اللجنة
في حالة عدم الموافقة تذكر األسباب
التاريخ التوقيع اإلسم /
ا.د .قاسم محمد دوس رئيس اللجنة العلمية
ا.د.فتحي عبد الصاحب عبد الحسين
رئيس القسم
الشماع
3