Professional Documents
Culture Documents
Controls
Home
Controls one to four Modutrol (series 90) motors from one master
motor.
• Compatible with Modutrol III and Modutrol IV motors.
• Mounts on master motor and operates controlled motors in unison or
in sequence.
• Controls motors with mechanical balance relay and solid state drive
Combustion Controls
Approvals:
CE: Report: GV97-011
Residential
Product Number Control Signal Includes Comments Used With
Q181A1007 SPST, On/Off switch Cover For controlling one modutrol motor Series 90
Q181A1015 SPST, On/Off switch Cover For controlling two modutrol motors Series 90
Q181A1064 SPST, On/Off switch — For controlling up to three modutrol motors Series 90
Hydronic Controls
Q181A1072 SPST, On/Off switch — For controlling up to four modutrol motors Series 90
* TRADELINE models • SUPER TRADELINE models
Controls
Water
Application Type: Electro-mechanical
Dimensions, Approximate: 3 1/4 in. high x 3 3/8 in. wide x 3 7/8 in.
deep (83 mm high x 86 mm wide x 98 mm deep)
Electrical Connections: Screw terminals
Mounting: Internal mount to Modutrol IV Motors
Weight: 0.2 lb
Building Automation
Approvals:
CE: Report: GV97-011
Q209A Q209E
Components
Commercial
Q209A1022 SPST, On/Off switch 150 ohm Potentiometer, leadwires and bracket M744, M745, M941, M944, M945,
M954, M955
Q209A1030 SPST, On/Off switch 300 ohm Potentiometer, leadwires and bracket M744, M745, M941, M944, M945,
M954, M955
Q209E1002 SPST, On/Off switch 150 ohm Potentiometer, factory mounted on a wring cover box —
Q209E1010 SPST, On/Off switch 300 Ohm Potentiometer, Factory Mounted on a wiring cover box —
Pneumatic Controls
70-6910 443
Modutrol IV Motors
Q607 Auxiliary Switches for Modutrol Motors
For control of auxiliary equipment as a function of motor shaft
position.
• Compatible with Modutrol III and Modutrol IV motors. (Requires
220738A adapter bracket for use with Modutrol IV motors).
• Micro Switch precision switches, adjustable.
• Indicate motor position by use of a scale plate anchored to a
common shaft, which allows Q607 to be adjusted for operational
sequence before mounting.
• Adjustable plate allows universal mounting on either end of motor.
• Wrap-around cover for easy access to switch adjustments and
wiring.
• Maintenance-free protection of the switches and cams.
Internal
Auxiliary
Product Number Switch Control Signal Includes Comments
Q607A1050 1 SPST, On/Off switch Revised mounting bracket Post 1969 Honeywell Modutrol Motors
* Q607A1076 1 SPST, On/Off switch With adapter for cover end spring return motor and Post 1969 Honeywell Modutrol Motors
revised mounting bracket
Q607B1067 2 SPST, On/Off switch Revised mounting bracket Pre/Post 1969 Honeywell Modutrol
Motors
* Q607B1083 2 SPST, On/Off switch With adapter for cover end spring return motor and —
revised mounting bracket
Q607C1009 1 SPST, On/Off switch Special terminal panel and metric grounding screws —
Q607D1008 2 SPST, On/Off switch Special terminal panel and metric grounding screws —
* TRADELINE models • SUPER TRADELINE models
Controls
Home
Series 90 Modutrol IV Motors
For converting series 90 Modutrol IV motors to series 70
(electronic) control.
• Mounts and works inside wiring box of any series 90 Modutrol IV
Motor.
Combustion Controls
Dimensions, Approximate: 3.78 in. (96 mm) wide, 1.93 in. (49 mm)
deep, 1.58 in. (40mm) high
Residential
**Fits inside wiring junction box of Modutrol IV Motor
Ambient Temperature Ratings: -40 F to +150 F (-40 C to +66 C).
Electrical Ratings: Power Supply: 24 Vac, 50/60 Hz.
Q7230A
Power Consumption: 2 VA.
Input Impedance:
Q7130A: >100K ohms.
Q7230A: Voltage input >100K ohms;
Current input = 67 ohms.
Hydronic Controls
Electrical Connections: Terminal Board
Frequency: 50 Hz; 60 Hz
Q7330A Mounting: Mounts to quick-connects inside Mod Motor
Ambient Temperature Range: -40 F to +150 F (-40 C to +60 C)
Weight: 0.3 lb
Controls
mA). Adapts M91XX to function as M72XX model.
Water
Q7330A1004 Provides interface to W936 Control. Adapts M91XX to function as M73XX model. Series 90 for conversion to Series 70
* TRADELINE models • SUPER TRADELINE models
Building Automation
Components
Commercial
Pneumatic Controls
Industrial Combustion
Controls
70-6910 445
Modutrol IV Motors
Interface Module Cross Reference and Usage Chart
.
Product Number Application Replaces Replaces Use With
Q7130A1006 Provides selectable voltage ranges: 4 to 7, 6 to 9 or 10.5 M734H1034, M734H1000 M7164G1006 M9164D1009
to 13.5 Vdc. Adapts M91XX Modutrol IV motor to function
M734H1018 M7164G1014
as M71XX model for M734H,J; M744D; M745G,P
replacements. M734H1026 M7164G1022
M734J1015 M7164A1009
M734J1031, M734J1023, M7164A1017
M734J1056
M734J1007, M734J1072 M7164B1007
M744D1011, M744D1003 M7184A1005 M9184D1021
M745G1007 M7186G1000 M9186G1006
M745P1007 M7185A1004 M9185D1004
Q7230A1005 Provides adjustable zero and span, voltage or current M744S1005 M7284A1004 M9184D1021
control (includes 4 to 20 mA and 2 to 10 Vdc). Adapts
M744S1013 M7284A1012
M91XX Modutrol IV motors to function as M72XX model
for M744S,T,Y; M745S,T,Y replacements. M744T1004 M7284C1000
M744T1012 M7284C1018
M744Y1009 M7284Q1009
M744Y1017 M7284Q1017
M745S1002 M7285A1003 M9185D1004
M745S1010 M7285A1011
M745T1001 M7285C1009
M745T1019 M7285C1017
M745Y1006 M7285Q1008
M745Y1014 M7285Q1016
Q7330A1004 Provides interface to W936 Control. Adapts M91XX M734D1004 M7364A1007 M9164D1009
Modutrol IV motor to function as M73XX model for M734D1012 M7364A1015
M734D; M744A; M745A replacements.
M734D1038 M7364A1023
M744A1006 M7384A1003 M9184D1021
M744A1014 M7384A1011
M745A1003 M7385A1002 M9185D1004
M745A1011 M7385A1010
Controls
Home
Spring return motors for two-position back draft, outdoor air
changeover, zone, or minimum position damper control.
• Operate outdoor air dampers for combustion or makeup air in
residential and light industrial applications.
• Operate changeover dampers for heating and cooling systems.
• Operate minimum position dampers for ventilation and similar
Combustion Controls
Dimensions, Approximate: 4 1/2 in. high x 4 5/8 in. wide x 3 3/4 in. Motor Shafts: 2
deep (114 mm high x 118 mm wide x 95 mm deep) Shaft Shape: Hexagonal
Residential
Fail Safe Mode: Spring Return Angle of Rotation (Stroke Max (deg)): 75
Control Signal: Two position, SPST Angle of Rotation (Stroke Min (deg)): 75
Internal Auxiliary Switch: 1 Operating Temperature Range: 32 F to 125 F (0 C to 52 C)
External Auxiliary Switches Available: Yes Operating Humidity Range (% RH): 5 to 95% RH
Torque Rating, Breakaway: 30 lb-in. Weight: 4 lb 10 oz (2.1 kg)
Electrical Connections: Screw terminals Approvals:
Frequency: 60 Hz Underwriters Laboratories Inc. Listed File: E4436, Guide: XAPX
Hydronic Controls
Mounting: Foot-mounted
Controls
Water
M436A1140 20 lb-in. 2.3 Nm 220 Vac 55 sec 25 sec Open: 0.21 A 0.062 A 30 W 8.5 W Ground Series
30 sec, and cover 40, 80
Close: screw circuits
25 sec
* M836A1042 20 lb-in. 2.3 Nm 24 Vac 40 sec 25 sec Open: 1.85 A 0.6 A 28 W 8.5 W — —
30 sec
Building Automation
* M836B1033 15 lb-in. 1.7 Nm 24 Vac 40 sec 25 sec Open: 1.34 A 0.73 A 20.3 W 11.2 W — —
25 sec
* TRADELINE models • SUPER TRADELINE models
Components
Commercial
Pneumatic Controls
Industrial Combustion
Controls
70-6910 447
Kit Mounted Motors
M835 Two-Position Zone Damper Actuator
Two-Position Zone Motor, used with two-wire, 24-volt room
thermostat or other controller for two position damper control.
• Controls zone or changeover damper in heating and air conditioning
systems, and control gates on feeders.
• SPST end switch makes within 20 sec of full open, breaks within 20
sec after start of closing stroke.
Dimensions, Approximate: 5 1/2 in. high x 4 1/4 in. wide x 2 5/8 in. Mounting: Foot-mounted
deep (140 mm high x 108 mm wide x 67 mm deep) Motor Shafts: 2
Fail Safe Mode: Spring Return Shaft Shape: Round
Control Signal: Two position, SPST Angle of Rotation (Stroke Max (deg)): 60
External Auxiliary Switches Available: No Angle of Rotation (Stroke Min (deg)): 75
Torque Rating, Breakaway: 30 lb-in. Operating Temperature Range: Cooling: 140 F, Heating: 200 F
Electrical Connections: Lead wire in conduit box (Cooling: 60 C, Heating: 93 C)
Frequency: 60 Hz Operating Humidity Range (% RH): 5 to 95% RH
Dimensions, Approximate: 3 1/2 in. high x 2 5/8 in. wide x 3 5/16 in. Motor Shafts: 1
deep (89 mm high x 66 mm wide x 84 mm deep) Shaft Shape: Round
Fail Safe Mode: Spring Return Angle of Rotation (Stroke Max (deg)): 45
Control Signal: Two position, SPST Operating Temperature Range: 40 F to 125 F (5 C to 50 C)
External Auxiliary Switches Available: No Operating Humidity Range (% RH): 5 to 95% RH
Frequency: 60 Hz Weight: 1.75 lbs
Mounting: Foot mounted. Direct Coupled
Torque Rating
Run Time (Maximum
Product Number (lb-in.) (Nm) Voltage (sec)) Includes
M847A1072 1.9 lb-in. 0.21 Nm 24 Vac 20 sec 3.8 in. linkage arm
M847A1080 1.9 lb-in. 0.21 Nm 24 Vac 20 sec 38 in. linkage chain
* TRADELINE models • SUPER TRADELINE models
Controls
Home
Product Number Description Used With
121825AA Auxiliary crank arm assembly M835; Q298
126809/0021 M836 Mounting Bracket M836
Combustion Controls
Residential
M11524
4074BRU
4074ELR Crank arm, heavy duty —
4074ELY Crank arm, infinitely adjustable —
Hydronic Controls
Versa Drive Accessories
Product Number Description
Q583C1002 Coupler and Bracket for Versadrive Actuator
Controls
Water
Building Automation
Components
Commercial
Pneumatic Controls
Industrial Combustion
Controls
70-6910 449
Damper and Valve Linkages
Q100 Linkage
Contains necessary hardware to link Modutrol™ motors to a V51B
Butterfly Valve.
• Compatible with Modutrol III and Modutrol IV™ motors. (Requires
adapter bracket, which is standard on all Modutrol IV motors
included in this catalog unless otherwise noted.)
• Adaptable for all sizes of V51B Valves.
• Strain release and stop bracket are provided with V51B.
Controls
Home
The Q5001 Valve Linkage connects a Modutrol™ Motor to a 2- or
3-way valve. It is used primarily on V5011 or V5013 steam and
water valves.
• Q5001 Valve Linkage is applicable to 2-Way or 3-Way valves in
modulating or two-position service.
• Linkage requires no adjustment when used with Honeywell valves
Combustion Controls
• Reversible cams on the Q5001 allow field selection of normally open
or normally closed valve operation.
• All models have anti-spin.
Residential
Linkage Type: Valve 220829JCQ1 Johnson Control Valve Adapter Kit
Mounting: Linkage mounts directly to the valve bonnet; motor mounts 220829LGQ1 Landis and Gyr Powers Valve Adapter Kit
on linkage bracket. 220829LGQ2 Landis and Gyr Powers Valve Adapter Kit
Used with Actuator: Modutrol Motor 220829LGQ3 Landis and Gyr Powers Valve Adapter Kit
Stem Force Rating: 80 or 160 lbf (356 N or 712 N)
Ambient Temperature Range: -40 F to +150 F (-40 C to +66 C) Replacement Parts:
220845/0767 Retainer button for Q5001
Hydronic Controls
Accessories:
220829BCQ1 Barber-Colman Valve Adapter Kit
Bonnet
Product Number Size (in.) Stroke Description Includes Used With
* Q5001D1000 1 3/8 in. 3/4 in. Valve Linkage for Mod III and Mod IV motors 1 3/8 in. valve bracket V5011/V5013; Modutrol IV Motors
with 80 or 160 lb stem force and Anti spin clip
* Q5001D1018 1 3/8 in. 3/4 in. Valve Linkage for Mod IV motors with 160 or 1 3/8 in. valve bracket Valve sizes up to 3 inch; V5011/
320 lb stem force and up to 3 inch valves and Anti spin clip V5013; Modutrol IV Motors
* Q5001D1026 1 7/8 in. 1 1/2 in. Valve Linkage for Mod IV motors with 160 or 1 7/8 in. valve bracket 4, 5 or 6 inch valves; V5011/V5013;
Controls
Water
320 lb stem force and 4, 5 or 6 inch valves and Anti spin clip Modutrol IV Motors
* TRADELINE models • SUPER TRADELINE models
Q5001 Parts
Linkage Type: Valve
Building Automation
Product Number Stroke Description Used With
220828AA — Valve bracket assembly, Q5001 Q5001
220845/0767 — Retainer button for Q5001 —
220848A 1/2 in. Q5001 Cam Q5001
220852A — Indicator, Q5001 Q5001
220858A 9/16 in. 9/16 inch lift Q5001 linkage cam assembly Q5001
Components
Commercial
220861A 3/4 in. 3/4 inch lift Q5001 linkage cam assembly Q5001
220863A 1 in. 1 inch lift Q5001 linkage cam assembly Q5001
220864A 1 1/8 in. 1 1/8 inch lift Q5001 linkage cam assembly Q5001
220865A 1 1/4 in. 1 1/4 inch lift Q5001 linkage cam assembly Q5001
220867A 1 1/2 in. 1 1/2 inch lift Q5001 linkage cam assembly Q5001
220874/0767 — 9/16 inch anti spin clip for Q5001 —
Pneumatic Controls
70-6910 451
Damper and Valve Linkages
Q5020 Globe Valve Linkages
The Q5020 Globe Valve Linkages connect a Honeywell direct
coupled actuator (DCA) to a steam or water globe valve. The Q5020
Linkages are compatible with two-way and three-way globe valves.
• Used with two-way and three-way globe valves in modulating or two-
position service.
• Used with 25, 50, and 142 lb-in. spring return and 35, 70, 150, and
300 lb-in. non-spring return DCA.
• Quick and simple installation with no disassembly required.
• Heavy-duty Steel rack and pinion construction and Aluminum Die-
cast housing.
• Maintenance-free construction.
• Precision roller-bearing rack construction prevents premature valve
packing wear and leakage.
• Flexible actuator mounting orientation.
• Adjustable manual override lever and valve position indicator.
• Can be mounted on specific non-Honeywell valves using a
32004629 Bonnet Adapter Kit.
Bonnet Shaft
Product Number Size (in.) Dimensions Stroke Description Includes Used With
Q5020A1003 1 3/8 in. 1/2 in. 3/4 in. Globe Valve Linkage with 1/2 inch shaft 1/2 in. diameter drive shaft V5011G; V5011F;
V5013N; V5011N
Q5020B1001 1 3/8 in. 1 in. 3/4 in. Globe Valve Linkage with 1 inch shaft 1 in. diameter drive shaft V5011G; V5011F;
V5013N; V5011N
Q5020C1009 1 3/8 in. 1 in. 1 1/2 in. Globe Valve Linkage with 1 inch shaft 1 in. diameter drive shaft V5051
Q5020D1007 1 3/8 in. 1/2 in. 1/2 in. Globe Valve Linkage with 1/2 inch shaft 1/2 in. diameter drive shaft Siebe valves;
Johnson valves;
Siemms valves
* TRADELINE models • SUPER TRADELINE models